65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 903.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 904.6 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 376.7 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **903.3** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 378.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **904.6** | | |  ## Per step @@ -30,7 +30,7 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 42.0 | 18.1 | 24.0 | 80 | 9 | 6 | 5.0 min | | routing | 152.9 | 25.5 | 127.4 | 65 | 12 | 0 | 7.0 min |-| pours | 56.1 | 27.5 | 28.6 | 99 | 12 | 4 | 9.5 min |+| pours | 57.0 | 27.5 | 29.6 | 103 | 12 | 4 | 9.5 min | | current | 90.2 | 1.2 | 89.0 | 36 | 12 | 4 | 0.5 min | | thermal | 10.3 | 2.1 | 8.2 | 30 | 12 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |@@ -38,14 +38,14 @@ AI time only, the idle cut out. | 3d | 8.3 | 0.1 | 8.2 | 16 | 6 | 0 | 0.1 min | | components | 1.4 | 0.1 | 1.2 | 5 | 2 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 358.5 | 15.2 | 343.3 | 61 | 7 | 0 | 4.2 min |+| export | 358.9 | 15.2 | 343.7 | 61 | 7 | 0 | 4.2 min | | fields | 80.2 | 0.3 | 79.9 | 15 | 6 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 2 | 2 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min | | models | 2.7 | 1.2 | 1.4 | 6 | 2 | 0 | 1.1 min | | nets | 6.4 | 0.1 | 6.3 | 12 | 6 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min |-| outline | 0.6 | 0.1 | 0.5 | 6 | 3 | 1 | 0.1 min |+| outline | 0.6 | 0.1 | 0.5 | 7 | 4 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 1.3 | 0.8 | 0.5 | 8 | 2 | 2 | 0.8 min |@@ -55,7 +55,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 7 | 2 | 0 | 1.3 min | | thermal-vias | 1.7 | 0.0 | 1.6 | 12 | 5 | 1 | 0.0 min |-| **total** | **903.3** | **160.2** | **743.0** | | | | |+| **total** | **904.6** | **160.2** | **744.4** | | | | |  ## Returns to earlier steps @@ -210,11 +210,14 @@ AI time only, the idle cut out. - 2026-11-10T04:15:13Z clip-start:routing-12 - 2026-11-10T04:15:44Z clip-start:thermal-vias-5 - 2026-11-10T04:16:07Z clip-start:pours-12+- 2026-11-10T04:17:26Z clip-start:outline-4  ## Where the board stands  - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries+- pours (landed): 0 groups, failed []+- copper kept (mm2 per layer): {"B.Cu":23387.02,"F.Cu":24947.91}  ## The steps on camera @@ -2014,12 +2017,32 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**Clip: pours, visit 12, still recording (started 2026-11-10T04:16:07Z); it appears here when the step ends.**+**Clip: pours, visit 12, the PCB editor from 2026-11-10T04:16:07Z to 2026-11-10T04:17:13Z. Motion only: 1.1 min of real time, 18 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-12.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 12 clip, what the camera saw.**++![nine frames of pours, visit 12](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-12-sheet.png)  **Screenshot: the board when pours, visit 12 began.**  ![the board when pours, visit 12 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-12-start.png) +**Screenshot: the board when pours, visit 12 ended.**++![the board when pours, visit 12 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-12-end.png)++### outline, visit 4++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 4, still recording (started 2026-11-10T04:17:26Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 4 began.**++![the board when outline, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-4-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.