65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 321.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 322.2 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 321.3 | 52 | the first prompt |-| **all** | | | **321.3** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 322.1 | 52 | the first prompt |+| **all** | | | **322.2** | | |  ## Per step @@ -22,7 +22,7 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 34.8 | 12.7 | 22.1 | 71 | 6 | 4 | 4.2 min | | routing | 99.9 | 7.8 | 92.1 | 46 | 9 | 0 | 3.7 min |-| pours | 11.8 | 1.0 | 10.8 | 29 | 6 | 3 | 0.4 min |+| pours | 12.5 | 1.0 | 11.6 | 33 | 6 | 3 | 0.4 min | | current | 55.2 | 1.1 | 54.1 | 20 | 6 | 1 | 0.5 min | | thermal | 9.1 | 2.1 | 6.9 | 18 | 6 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |@@ -36,7 +36,7 @@ AI time only, the idle cut out. | models | 2.0 | 1.2 | 0.8 | 4 | 1 | 0 | 1.1 min | | nets | 2.2 | 0.1 | 2.1 | 4 | 2 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min |-| outline | 0.2 | 0.1 | 0.1 | 2 | 1 | 1 | 0.1 min |+| outline | 0.3 | 0.1 | 0.3 | 3 | 2 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min |@@ -46,7 +46,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |-| **total** | **321.3** | **91.8** | **229.4** | | | | |+| **total** | **322.1** | **91.8** | **230.3** | | | | |  ## Returns to earlier steps @@ -120,6 +120,7 @@ AI time only, the idle cut out. - 2026-11-09T06:34:18Z clip-start:routing-9 - 2026-11-09T06:34:58Z clip-start:thermal-vias-3 - 2026-11-09T06:35:06Z clip-start:pours-6+- 2026-11-09T06:35:56Z clip-start:outline-2  ## Where the board stands @@ -1040,12 +1041,32 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**Clip: pours, visit 6, still recording (started 2026-11-09T06:35:05Z); it appears here when the step ends.**+**Clip: pours, visit 6, the PCB editor from 2026-11-09T06:35:05Z to 2026-11-09T06:35:51Z. Motion only: 0.8 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 6 clip, what the camera saw.**++![nine frames of pours, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-6-sheet.png)  **Screenshot: the board when pours, visit 6 began.**  ![the board when pours, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-6-start.png) +**Screenshot: the board when pours, visit 6 ended.**++![the board when pours, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-6-end.png)++### outline, visit 2++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 2, still recording (started 2026-11-09T06:35:56Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 2 began.**++![the board when outline, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.