65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 8 open item(s); not cleared for fabrication** (2026-11-09T21:05:17Z, 508.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 8 open item(s); not cleared for fabrication** (2026-11-09T21:05:17Z, 508.5 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -17,8 +17,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 5 | 2026-11-09T15:29:58Z | (open) | 0.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 8 | 2026-11-09T19:50:33Z | (open) | 77.2 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **508.3** | | |+| 8 | 2026-11-09T19:50:33Z | (open) | 77.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **508.5** | | |  ## Per step @@ -30,8 +30,8 @@ AI time only, the idle cut out. | placement | 41.5 | 18.1 | 23.4 | 76 | 7 | 5 | 5.0 min | | routing | 151.2 | 25.5 | 125.7 | 57 | 10 | 0 | 7.0 min | | pours | 56.1 | 27.5 | 28.6 | 98 | 11 | 4 | 9.5 min |-| current | 74.4 | 1.2 | 73.2 | 31 | 11 | 3 | 0.5 min |-| thermal | 9.7 | 2.1 | 7.6 | 26 | 10 | 0 | 0.9 min |+| current | 74.5 | 1.2 | 73.3 | 32 | 11 | 3 | 0.5 min |+| thermal | 9.8 | 2.1 | 7.7 | 27 | 11 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | finish | 8.3 | 1.0 | 7.3 | 16 | 8 | 0 | 0.4 min | | 3d | 5.6 | 0.1 | 5.5 | 10 | 4 | 0 | 0.1 min |@@ -54,7 +54,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **508.3** | **153.7** | **354.6** | | | | |+| **total** | **508.5** | **153.7** | **354.8** | | | | |  ## Returns to earlier steps @@ -177,6 +177,7 @@ AI time only, the idle cut out. - 2026-11-09T21:04:11Z pulled 2 clip(s) that had not reached the run - 2026-11-09T21:05:00Z pulled 2 clip(s) that had not reached the run - 2026-11-09T21:07:43Z clip-start:current-11+- 2026-11-09T21:07:52Z clip-start:thermal-11  ## Where the board stands @@ -184,7 +185,7 @@ AI time only, the idle cut out. - landed live: 0 of 0 route entries - pours (landed): 0 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":22308.92,"F.Cu":24966.84}-- analyze-current: pass+- analyze-current: fail - analyze-thermal: pass  ## The steps on camera@@ -1595,12 +1596,32 @@ What this step does: The finish line for the human: Gerbers, drill, BOM and pick  What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged -**Clip: current, visit 11, still recording (started 2026-11-09T21:07:43Z); it appears here when the step ends.**+**Clip: current, visit 11, the PCB editor from 2026-11-09T21:07:43Z to 2026-11-09T21:07:49Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-11.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the current, visit 11 clip, what the camera saw.**++![nine frames of current, visit 11](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/current-11-sheet.png)  **Screenshot: the board when current, visit 11 began.**  ![the board when current, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-11-start.png) +**Screenshot: the board when current, visit 11 ended.**++![the board when current, visit 11 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-11-end.png)++### thermal, visit 11++What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged++**Clip: thermal, visit 11, still recording (started 2026-11-09T21:07:52Z); it appears here when the step ends.**++**Screenshot: the board when thermal, visit 11 began.**++![the board when thermal, visit 11 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-11-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.