65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 322.5 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 322.7 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 322.5 | 52 | the first prompt |-| **all** | | | **322.5** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 322.7 | 52 | the first prompt |+| **all** | | | **322.7** | | |  ## Per step @@ -26,7 +26,7 @@ AI time only, the idle cut out. | current | 55.4 | 1.1 | 54.2 | 22 | 7 | 1 | 0.5 min | | thermal | 9.2 | 2.1 | 7.0 | 20 | 7 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| finish | 2.5 | 0.7 | 1.8 | 4 | 2 | 0 | 0.4 min |+| finish | 2.5 | 0.7 | 1.8 | 5 | 3 | 0 | 0.4 min | | 3d | 2.4 | 0.1 | 2.2 | 5 | 2 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -41,12 +41,12 @@ AI time only, the idle cut out. | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 13.7 | 8.4 | 5.3 | 25 | 3 | 0 | 4.8 min |+| silkscreen | 13.8 | 8.4 | 5.5 | 26 | 3 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |-| **total** | **322.5** | **91.9** | **230.6** | | | | |+| **total** | **322.7** | **91.9** | **230.8** | | | | |  ## Returns to earlier steps @@ -124,6 +124,7 @@ AI time only, the idle cut out. - 2026-11-09T06:36:02Z clip-start:current-7 - 2026-11-09T06:36:09Z clip-start:thermal-7 - 2026-11-09T06:36:16Z clip-start:silkscreen-3+- 2026-11-09T06:36:28Z clip-start:finish-3  ## Where the board stands @@ -1124,12 +1125,32 @@ What this step does: copper and vias at every hot tab against the rise budget; t  What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge. -**Clip: silkscreen, visit 3, still recording (started 2026-11-09T06:36:16Z); it appears here when the step ends.**+**Clip: silkscreen, visit 3, the PCB editor from 2026-11-09T06:36:16Z to 2026-11-09T06:36:25Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the silkscreen, visit 3 clip, what the camera saw.**++![nine frames of silkscreen, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/silkscreen-3-sheet.png)  **Screenshot: the board when silkscreen, visit 3 began.**  ![the board when silkscreen, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-3-start.png) +**Screenshot: the board when silkscreen, visit 3 ended.**++![the board when silkscreen, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-3-end.png)++### finish, visit 3++What this step does: finish refuses until everything is true; the AI cuts the video and delivers++**Clip: finish, visit 3, still recording (started 2026-11-09T06:36:28Z); it appears here when the step ends.**++**Screenshot: the board when finish, visit 3 began.**++![the board when finish, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.