65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T21:25:59Z, 564.2 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T21:25:59Z, 565.6 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 37.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **564.2** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 39.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **565.6** | | |  ## Per step @@ -43,19 +43,19 @@ AI time only, the idle cut out. | libraries | 0.1 | 0.1 | 0.1 | 1 | 1 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min | | models | 2.0 | 1.2 | 0.8 | 4 | 1 | 0 | 1.1 min |-| nets | 5.3 | 0.1 | 5.2 | 11 | 6 | 0 | 0.1 min |+| nets | 6.4 | 0.1 | 6.3 | 12 | 6 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min | | outline | 0.6 | 0.1 | 0.5 | 6 | 3 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 22.8 | 11.7 | 11.1 | 62 | 9 | 2 | 4.8 min |+| silkscreen | 23.1 | 11.7 | 11.4 | 63 | 10 | 2 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **564.2** | **159.1** | **405.1** | | | | |+| **total** | **565.6** | **159.1** | **406.5** | | | | |  ## Returns to earlier steps @@ -192,6 +192,10 @@ AI time only, the idle cut out. - 2026-11-09T22:07:25Z clip-start:current-12 - 2026-11-09T22:23:21Z clip-start:thermal-12 - 2026-11-09T22:37:08Z clip-start:nets-6+- 2026-11-09T22:37:58Z net GND: 121 items highlighted+- 2026-11-09T22:38:02Z net +3V3: 86 items highlighted+- 2026-11-09T22:38:08Z net VBUS: 32 items highlighted+- 2026-11-09T22:38:27Z clip-start:silkscreen-10  ## Where the board stands @@ -1797,12 +1801,32 @@ What this step does: the fields on the board: adom-fields solves the current den  What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one -**Clip: nets, visit 6, still recording (started 2026-11-09T22:37:08Z); it appears here when the step ends.**+**Clip: nets, visit 6, the PCB editor from 2026-11-09T22:37:08Z to 2026-11-09T22:38:15Z. Motion only: 1.1 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the nets, visit 6 clip, what the camera saw.**++![nine frames of nets, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-6-sheet.png)  **Screenshot: the board when nets, visit 6 began.**  ![the board when nets, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-6-start.png) +**Screenshot: the board when nets, visit 6 ended.**++![the board when nets, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-6-end.png)++### silkscreen, visit 10++What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.++**Clip: silkscreen, visit 10, still recording (started 2026-11-09T22:38:27Z); it appears here when the step ends.**++**Screenshot: the board when silkscreen, visit 10 began.**++![the board when silkscreen, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-10-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.