65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `thermal`, 250.6 min of AI time since the prompt (302.4 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 251.2 min of AI time since the prompt (303.0 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 250.6 | 52 | the first prompt |-| **all** | | | **250.6** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 251.2 | 52 | the first prompt |+| **all** | | | **251.2** | | |  ## Per step @@ -24,7 +24,7 @@ AI time only, the idle cut out. | routing | 99.3 | 7.8 | 91.5 | 43 | 8 | 0 | 3.7 min | | pours | 10.1 | 0.9 | 9.2 | 22 | 4 | 2 | 0.4 min | | current | 36.9 | 1.1 | 35.8 | 17 | 5 | 1 | 0.5 min |-| thermal | 7.2 | 1.8 | 5.5 | 15 | 5 | 0 | 0.9 min |+| thermal | 7.7 | 2.1 | 5.6 | 16 | 5 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -32,6 +32,7 @@ AI time only, the idle cut out. | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min | | models | 2.0 | 1.2 | 0.8 | 4 | 1 | 0 | 1.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min |+| outline | 0.1 | 0.0 | 0.1 | 1 | 1 | 1 | 0.0 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.8 | 0.8 | 0.0 | 2 | 0 | 0 | 0.8 min |@@ -40,7 +41,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **250.6** | **81.6** | **169.0** | | | | |+| **total** | **251.2** | **82.0** | **169.2** | | | | |  ## Returns to earlier steps @@ -51,6 +52,7 @@ AI time only, the idle cut out. - 2026-11-09T04:45:19Z back to **current** (visit 3):  - 2026-11-09T04:50:42Z back to **pours** (visit 3): Fields ground offset 15 mV under U1: add GND stitching vias between the pours - 2026-11-09T05:03:14Z back to **pours** (visit 4): +- 2026-11-09T05:24:53Z back to **outline** (visit 1):   ## Decisions along the way @@ -83,6 +85,7 @@ AI time only, the idle cut out. - 2026-11-09T05:03:29Z clip-start:pours-4 - 2026-11-09T05:04:23Z clip-start:current-5 - 2026-11-09T05:24:26Z clip-start:thermal-5+- 2026-11-09T05:24:59Z clip-start:outline-1  ## Where the board stands @@ -91,6 +94,7 @@ AI time only, the idle cut out. - pours (landed): 0 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":24245.08,"F.Cu":27783.83} - analyze-current: pass+- analyze-thermal: pass  ## The steps on camera @@ -614,12 +618,32 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, visit 5, still recording (started 2026-11-09T05:24:26Z); it appears here when the step ends.**+**Clip: thermal, visit 5, the PCB editor from 2026-11-09T05:24:26Z to 2026-11-09T05:24:54Z. Motion only: 0.5 min of real time, 11 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-5.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 5 clip, what the camera saw.**++![nine frames of thermal, visit 5](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-5-sheet.png)  **Screenshot: the board when thermal, visit 5 began.**  ![the board when thermal, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-5-start.png) +**Screenshot: the board when thermal, visit 5 ended.**++![the board when thermal, visit 5 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-5-end.png)++### outline++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, still recording (started 2026-11-09T05:24:59Z); it appears here when the step ends.**++**Screenshot: the board when outline began.**++![the board when outline began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-outline-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.