65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T21:25:59Z, 567.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 4 open item(s); not cleared for fabrication** (2026-11-09T22:43:17Z, 898.1 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 40.7 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **567.3** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 371.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **898.1** | | |  ## Per step @@ -38,7 +38,7 @@ AI time only, the idle cut out. | 3d | 8.3 | 0.1 | 8.2 | 16 | 6 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 26.7 | 14.1 | 12.6 | 50 | 7 | 0 | 4.2 min |+| export | 357.5 | 15.2 | 342.3 | 61 | 7 | 0 | 4.2 min | | fields | 80.2 | 0.3 | 79.9 | 15 | 6 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 1 | 1 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min |@@ -48,14 +48,14 @@ AI time only, the idle cut out. | outline | 0.6 | 0.1 | 0.5 | 6 | 3 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min |-| rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min |+| rules | 0.9 | 0.8 | 0.1 | 5 | 2 | 2 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min | | silkscreen | 23.1 | 11.7 | 11.5 | 64 | 10 | 2 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **567.3** | **159.1** | **408.2** | | | | |+| **total** | **898.1** | **160.2** | **737.9** | | | | |  ## Returns to earlier steps @@ -79,6 +79,7 @@ AI time only, the idle cut out. - 2026-11-09T21:03:30Z back to **current** (visit 10):  - 2026-11-09T21:07:42Z back to **current** (visit 11):  - 2026-11-09T22:07:24Z back to **current** (visit 12): +- 2026-11-10T04:11:01Z back to **rules** (visit 2): Rev B requested by the user: PCBWay bare board (hand-soldered), soldered MX switches instead of hotswap sockets, green mask, lead-free HASL  ## Decisions along the way @@ -199,10 +200,15 @@ AI time only, the idle cut out. - 2026-11-09T22:38:42Z clip-start:3d-6 - 2026-11-09T22:40:00Z clip-start:finish-10 - 2026-11-09T22:40:08Z clip-start:export-7+- 2026-11-09T22:40:48Z pulled 2 clip(s) that had not reached the run+- 2026-11-09T22:42:10Z artifact analysis-image for fields-6: Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.+- 2026-11-09T22:42:48Z pulled 2 clip(s) that had not reached the run+- 2026-11-10T04:11:02Z clip-start:rules-2  ## Where the board stands  - gate: 0 new DRC errors, 0 unconnected, null inherited+- copper kept (mm2 per layer): {"B.Cu":22308.92,"F.Cu":24966.84} - analyze-current: pass - analyze-thermal: pass @@ -1800,6 +1806,10 @@ What this step does: the fields on the board: adom-fields solves the current den  ![nine frames of fields, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-6-sheet.png) +**The AI's drawing: Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.**++![Adom Fields current and heat screen on the final board: VBUS and GND at 0.5 A peak 40 A/mm2, +3V3 at 0.1 A 12 A/mm2, under 1 C rise in still air. The 'no TVS' tag on J2 is expected: ESD protection is on the USB daughterboard.](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/fields-6-analysis-image-0.png)+ ### nets, visit 6  What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one@@ -1880,21 +1890,39 @@ What this step does: finish refuses until everything is true; the AI cuts the vi  What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is. -**Clip: export, visit 7, still recording (started 2026-11-09T22:40:08Z); it appears here when the step ends.**+**Clip: export, visit 7, the PCB editor from 2026-11-09T22:40:08Z to 2026-11-09T22:41:26Z. Motion only: 1.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-7.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the export, visit 7 clip, what the camera saw.**++![nine frames of export, visit 7](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/export-7-sheet.png)  **Screenshot: the board when export, visit 7 began.**  ![the board when export, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-7-start.png) +### rules, visit 2 (rework)++What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.++Why the AI came back here: Rev B requested by the user: PCBWay bare board (hand-soldered), soldered MX switches instead of hotswap sockets, green mask, lead-free HASL++**Clip: rules, visit 2 (rework), still recording (started 2026-11-10T04:11:02Z); it appears here when the step ends.**++**Screenshot: the board when rules, visit 2 (rework) began.**++![the board when rules, visit 2 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 8.00 % | 14.00 % | 40.00 % |+| claude | 5h | 8.00 % | 8.00 % | 48.00 % | | claude | Fable | 65.00 % | 65.00 % | 0.00 % |-| claude | week | 43.00 % | 50.00 % | 7.00 % |+| claude | week | 43.00 % | 51.00 % | 8.00 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*