65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 321.2 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 7 open item(s); not cleared for fabrication** (2026-11-09T06:33:26Z, 321.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 321.2 | 52 | the first prompt |-| **all** | | | **321.2** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 321.3 | 52 | the first prompt |+| **all** | | | **321.3** | | |  ## Per step @@ -22,7 +22,7 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 34.8 | 12.7 | 22.1 | 71 | 6 | 4 | 4.2 min | | routing | 99.9 | 7.8 | 92.1 | 46 | 9 | 0 | 3.7 min |-| pours | 11.7 | 1.0 | 10.8 | 28 | 5 | 3 | 0.4 min |+| pours | 11.8 | 1.0 | 10.8 | 29 | 6 | 3 | 0.4 min | | current | 55.2 | 1.1 | 54.1 | 20 | 6 | 1 | 0.5 min | | thermal | 9.1 | 2.1 | 6.9 | 18 | 6 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |@@ -45,8 +45,8 @@ AI time only, the idle cut out. | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min |-| thermal-vias | 0.3 | 0.0 | 0.3 | 6 | 3 | 0 | 0.0 min |-| **total** | **321.2** | **91.8** | **229.3** | | | | |+| thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |+| **total** | **321.3** | **91.8** | **229.4** | | | | |  ## Returns to earlier steps @@ -119,6 +119,7 @@ AI time only, the idle cut out. - 2026-11-09T06:33:52Z clip-start:placement-6 - 2026-11-09T06:34:18Z clip-start:routing-9 - 2026-11-09T06:34:58Z clip-start:thermal-vias-3+- 2026-11-09T06:35:06Z clip-start:pours-6  ## Where the board stands @@ -1019,12 +1020,32 @@ What this step does: route to 100 percent with the spec's rules, gate with KiCad  What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it. -**Clip: thermal-vias, visit 3, still recording (started 2026-11-09T06:34:58Z); it appears here when the step ends.**+**Clip: thermal-vias, visit 3, the PCB editor from 2026-11-09T06:34:58Z to 2026-11-09T06:35:02Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal-vias, visit 3 clip, what the camera saw.**++![nine frames of thermal-vias, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-vias-3-sheet.png)  **Screenshot: the board when thermal-vias, visit 3 began.**  ![the board when thermal-vias, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-3-start.png) +**Screenshot: the board when thermal-vias, visit 3 ended.**++![the board when thermal-vias, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-vias-3-end.png)++### pours, visit 6++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++**Clip: pours, visit 6, still recording (started 2026-11-09T06:35:05Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 6 began.**++![the board when pours, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-6-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.