65% MX Keyboard (soldered)

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `3d`, 301.1 min of AI time since the prompt (352.9 min on the wall clock). This page updates at every step change.+**Running**: step `finish`, 302.0 min of AI time since the prompt (353.8 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 301.1 | 52 | the first prompt |-| **all** | | | **301.1** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 302.0 | 52 | the first prompt |+| **all** | | | **302.0** | | |  ## Per step @@ -26,7 +26,8 @@ AI time only, the idle cut out. | current | 55.2 | 1.1 | 54.1 | 20 | 6 | 1 | 0.5 min | | thermal | 9.1 | 2.1 | 6.9 | 18 | 6 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| 3d | 0.3 | 0.0 | 0.3 | 1 | 1 | 0 | 0.0 min |+| finish | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| 3d | 1.3 | 0.1 | 1.2 | 2 | 1 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min | | fields | 13.2 | 0.2 | 13.0 | 5 | 1 | 0 | 0.2 min |@@ -45,7 +46,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **301.1** | **90.9** | **210.2** | | | | |+| **total** | **302.0** | **91.0** | **211.0** | | | | |  ## Returns to earlier steps @@ -102,6 +103,7 @@ AI time only, the idle cut out. - 2026-11-09T06:10:55Z clip-start:thermal-6 - 2026-11-09T06:11:03Z clip-start:silkscreen-2 - 2026-11-09T06:14:50Z clip-start:3d-1+- 2026-11-09T06:15:50Z clip-start:finish-1  ## Where the board stands @@ -802,12 +804,28 @@ What this step does: Make both faces useful in real service: references and valu  What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse -**Clip: 3d, still recording (started 2026-11-09T06:14:50Z); it appears here when the step ends.**+**Clip: 3d, the PCB editor from 2026-11-09T06:15:10Z to 2026-11-09T06:15:35Z. Motion only: 0.4 min of real time, 9 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the 3d clip, what the camera saw.**++![nine frames of 3d](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/3d-1-sheet.png)  **Screenshot: the board when 3d began.**  ![the board when 3d began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-1-start.png) +### finish++What this step does: finish refuses until everything is true; the AI cuts the video and delivers++**Clip: finish, still recording (started 2026-11-09T06:15:50Z); it appears here when the step ends.**++**Screenshot: the board when finish began.**++![the board when finish began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.

⋯ 1 unchanged line ⋯