65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 1 open item(s); not cleared for fabrication** (2026-11-09T06:54:30Z, 464.8 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 1 open item(s); not cleared for fabrication** (2026-11-09T06:54:30Z, 464.9 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -17,8 +17,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 5 | 2026-11-09T15:29:58Z | (open) | 0.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 8 | 2026-11-09T19:50:33Z | (open) | 33.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **464.8** | | |+| 8 | 2026-11-09T19:50:33Z | (open) | 33.8 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **464.9** | | |  ## Per step @@ -31,7 +31,7 @@ AI time only, the idle cut out. | routing | 151.2 | 25.5 | 125.7 | 57 | 10 | 0 | 7.0 min | | pours | 56.1 | 27.5 | 28.6 | 98 | 11 | 4 | 9.5 min | | current | 74.3 | 1.2 | 73.2 | 28 | 9 | 1 | 0.5 min |-| thermal | 9.6 | 2.1 | 7.5 | 23 | 9 | 0 | 0.9 min |+| thermal | 9.7 | 2.1 | 7.5 | 24 | 9 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | finish | 4.2 | 0.9 | 3.3 | 8 | 4 | 0 | 0.4 min | | 3d | 3.3 | 0.1 | 3.2 | 7 | 3 | 0 | 0.1 min |@@ -49,12 +49,12 @@ AI time only, the idle cut out. | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.9 | 0.8 | 0.1 | 4 | 1 | 1 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 16.5 | 9.0 | 7.5 | 38 | 4 | 0 | 4.8 min |+| silkscreen | 16.7 | 9.0 | 7.7 | 39 | 5 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |-| **total** | **464.8** | **143.0** | **321.7** | | | | |+| **total** | **464.9** | **143.0** | **321.9** | | | | |  ## Returns to earlier steps @@ -154,6 +154,7 @@ AI time only, the idle cut out. - 2026-11-09T20:06:29Z clip-start:pours-11 - 2026-11-09T20:07:55Z clip-start:current-9 - 2026-11-09T20:24:06Z clip-start:thermal-9+- 2026-11-09T20:24:17Z clip-start:silkscreen-5  ## Where the board stands @@ -162,6 +163,7 @@ AI time only, the idle cut out. - pours (landed): 0 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":22308.92,"F.Cu":24966.84} - analyze-current: pass+- analyze-thermal: pass  ## The steps on camera @@ -1371,12 +1373,32 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, visit 9, still recording (started 2026-11-09T20:24:06Z); it appears here when the step ends.**+**Clip: thermal, visit 9, the PCB editor from 2026-11-09T20:24:06Z to 2026-11-09T20:24:13Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-9.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 9 clip, what the camera saw.**++![nine frames of thermal, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-9-sheet.png)  **Screenshot: the board when thermal, visit 9 began.**  ![the board when thermal, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-9-start.png) +**Screenshot: the board when thermal, visit 9 ended.**++![the board when thermal, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-9-end.png)++### silkscreen, visit 5++What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.++**Clip: silkscreen, visit 5, still recording (started 2026-11-09T20:24:17Z); it appears here when the step ends.**++**Screenshot: the board when silkscreen, visit 5 began.**++![the board when silkscreen, visit 5 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-5-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.