65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `finish`, 302.0 min of AI time since the prompt (353.8 min on the wall clock). This page updates at every step change.+**finish ran with 6 open item(s); not cleared for fabrication** (2026-11-09T06:16:43Z, 303.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 302.0 | 52 | the first prompt |-| **all** | | | **302.0** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 303.2 | 52 | the first prompt |+| **all** | | | **303.3** | | |  ## Per step @@ -26,7 +26,7 @@ AI time only, the idle cut out. | current | 55.2 | 1.1 | 54.1 | 20 | 6 | 1 | 0.5 min | | thermal | 9.1 | 2.1 | 6.9 | 18 | 6 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| finish | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| finish | 1.2 | 0.3 | 0.9 | 2 | 1 | 0 | 0.3 min | | 3d | 1.3 | 0.1 | 1.2 | 2 | 1 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -39,14 +39,14 @@ AI time only, the idle cut out. | outline | 0.2 | 0.1 | 0.1 | 2 | 1 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min | | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min |-| rules | 0.8 | 0.8 | 0.0 | 2 | 0 | 0 | 0.8 min |+| rules | 0.8 | 0.8 | 0.1 | 3 | 1 | 1 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min | | silkscreen | 13.7 | 8.4 | 5.3 | 24 | 2 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **302.0** | **91.0** | **211.0** | | | | |+| **total** | **303.2** | **91.3** | **211.9** | | | | |  ## Returns to earlier steps @@ -59,6 +59,7 @@ AI time only, the idle cut out. - 2026-11-09T05:03:14Z back to **pours** (visit 4):  - 2026-11-09T05:24:53Z back to **outline** (visit 1):  - 2026-11-09T05:49:41Z back to **pours** (visit 5): +- 2026-11-09T06:17:02Z back to **rules** (visit 1): re-record this step's proof on the final board (run.json outcomes were cleared by an accidental start --force; board and spec unchanged)  ## Decisions along the way @@ -104,6 +105,7 @@ AI time only, the idle cut out. - 2026-11-09T06:11:03Z clip-start:silkscreen-2 - 2026-11-09T06:14:50Z clip-start:3d-1 - 2026-11-09T06:15:50Z clip-start:finish-1+- 2026-11-09T06:17:02Z clip-start:rules-1  ## Where the board stands @@ -820,12 +822,30 @@ What this step does: the 3D walkthrough: the viewer opened from the editor, then  What this step does: finish refuses until everything is true; the AI cuts the video and delivers -**Clip: finish, still recording (started 2026-11-09T06:15:50Z); it appears here when the step ends.**+**Clip: finish, the PCB editor from 2026-11-09T06:15:50Z to 2026-11-09T06:16:36Z. Motion only: 0.8 min of real time, 17 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the finish clip, what the camera saw.**++![nine frames of finish](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-1-sheet.png)  **Screenshot: the board when finish began.**  ![the board when finish began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-1-start.png) +### rules++What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.++Why the AI came back here: re-record this step's proof on the final board (run.json outcomes were cleared by an accidental start --force; board and spec unchanged)++**Clip: rules, still recording (started 2026-11-09T06:17:02Z); it appears here when the step ends.**++**Screenshot: the board when rules began.**++![the board when rules began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-rules-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.