65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `thermal`, 226.7 min of AI time since the prompt (278.5 min on the wall clock). This page updates at every step change.+**Running**: step `pours`, 229.7 min of AI time since the prompt (281.5 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 226.7 | 52 | the first prompt |-| **all** | | | **226.7** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 229.7 | 52 | the first prompt |+| **all** | | | **229.7** | | |  ## Per step @@ -22,9 +22,9 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 34.4 | 12.7 | 21.7 | 69 | 5 | 3 | 4.2 min | | routing | 99.3 | 7.8 | 91.5 | 43 | 8 | 0 | 3.7 min |-| pours | 9.1 | 0.9 | 8.2 | 16 | 3 | 1 | 0.4 min |+| pours | 9.3 | 0.9 | 8.4 | 17 | 4 | 2 | 0.4 min | | current | 18.2 | 1.1 | 17.1 | 14 | 4 | 1 | 0.5 min |-| thermal | 3.1 | 1.3 | 1.8 | 7 | 4 | 0 | 0.9 min |+| thermal | 5.8 | 1.8 | 4.0 | 14 | 4 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -40,7 +40,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **226.7** | **81.1** | **145.6** | | | | |+| **total** | **229.7** | **81.6** | **148.1** | | | | |  ## Returns to earlier steps @@ -50,6 +50,7 @@ AI time only, the idle cut out. - 2026-11-09T04:01:34Z back to **placement** (visit 5): Fields: decoupling caps C3/C5 3.5-5 mm from their STM32 supply pins; power traces came out 0.2 mm because widths were only in the AI Flow spec, not KiCad netclasses - 2026-11-09T04:45:19Z back to **current** (visit 3):  - 2026-11-09T04:50:42Z back to **pours** (visit 3): Fields ground offset 15 mV under U1: add GND stitching vias between the pours+- 2026-11-09T05:03:14Z back to **pours** (visit 4):   ## Decisions along the way @@ -79,15 +80,12 @@ AI time only, the idle cut out. - 2026-11-09T04:50:46Z clip-start:pours-3 - 2026-11-09T04:55:38Z clip-start:current-4 - 2026-11-09T05:00:32Z clip-start:thermal-4+- 2026-11-09T05:03:29Z clip-start:pours-4  ## Where the board stands  - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries-- pours (landed): 0 groups, failed []-- copper kept (mm2 per layer): {"B.Cu":24245.08,"F.Cu":27783.83}-- analyze-current: pass-- analyze-thermal: pass  ## The steps on camera @@ -555,12 +553,28 @@ Why the AI came back here: re-solve after GND stitching vias  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, visit 4, still recording (started 2026-11-09T05:00:32Z); it appears here when the step ends.**+**Clip: thermal, visit 4, the PCB editor from 2026-11-09T05:00:32Z to 2026-11-09T05:03:17Z. Motion only: 2.7 min of real time, 12 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-4.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 4 clip, what the camera saw.**++![nine frames of thermal, visit 4](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-4-sheet.png)  **Screenshot: the board when thermal, visit 4 began.**  ![the board when thermal, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-4-start.png) +### pours, visit 4++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++**Clip: pours, visit 4, still recording (started 2026-11-09T05:03:29Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 4 began.**++![the board when pours, visit 4 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-4-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.