65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 8 open item(s); not cleared for fabrication** (2026-11-09T21:05:17Z, 525.1 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 8 open item(s); not cleared for fabrication** (2026-11-09T21:05:17Z, 525.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -17,8 +17,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 5 | 2026-11-09T15:29:58Z | (open) | 0.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 8 | 2026-11-09T19:50:33Z | (open) | 94.0 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **525.1** | | |+| 8 | 2026-11-09T19:50:33Z | (open) | 94.1 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **525.3** | | |  ## Per step @@ -33,11 +33,11 @@ AI time only, the idle cut out. | current | 74.5 | 1.2 | 73.3 | 32 | 11 | 3 | 0.5 min | | thermal | 9.9 | 2.1 | 7.8 | 28 | 11 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| finish | 8.3 | 1.0 | 7.3 | 17 | 9 | 0 | 0.4 min |+| finish | 8.4 | 1.0 | 7.4 | 17 | 9 | 0 | 0.4 min | | 3d | 7.0 | 0.1 | 6.8 | 13 | 5 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 17.2 | 8.7 | 8.5 | 34 | 5 | 0 | 4.2 min |+| export | 17.3 | 8.7 | 8.6 | 35 | 6 | 0 | 4.2 min | | fields | 66.5 | 0.3 | 66.2 | 13 | 5 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 1 | 1 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min |@@ -54,7 +54,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **525.1** | **153.7** | **371.4** | | | | |+| **total** | **525.3** | **153.7** | **371.6** | | | | |  ## Returns to earlier steps @@ -185,6 +185,7 @@ AI time only, the idle cut out. - 2026-11-09T21:22:53Z clip-start:silkscreen-9 - 2026-11-09T21:23:12Z clip-start:3d-5 - 2026-11-09T21:24:30Z clip-start:finish-9+- 2026-11-09T21:24:38Z clip-start:export-6  ## Where the board stands @@ -1711,12 +1712,32 @@ What this step does: the 3D walkthrough: the viewer opened from the editor, then  What this step does: finish refuses until everything is true; the AI cuts the video and delivers -**Clip: finish, visit 9, still recording (started 2026-11-09T21:24:30Z); it appears here when the step ends.**+**Clip: finish, visit 9, the PCB editor from 2026-11-09T21:24:30Z to 2026-11-09T21:24:35Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-9.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the finish, visit 9 clip, what the camera saw.**++![nine frames of finish, visit 9](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-9-sheet.png)  **Screenshot: the board when finish, visit 9 began.**  ![the board when finish, visit 9 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-9-start.png) +**Screenshot: the board when finish, visit 9 ended.**++![the board when finish, visit 9 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-9-end.png)++### export, visit 6++What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.++**Clip: export, visit 6, still recording (started 2026-11-09T21:24:38Z); it appears here when the step ends.**++**Screenshot: the board when export, visit 6 began.**++![the board when export, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-6-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.