65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `pours`, 217.0 min of AI time since the prompt (268.8 min on the wall clock). This page updates at every step change.+**Running**: step `current`, 221.9 min of AI time since the prompt (273.7 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 217.0 | 52 | the first prompt |-| **all** | | | **217.0** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 221.8 | 52 | the first prompt |+| **all** | | | **221.9** | | |  ## Per step @@ -22,8 +22,8 @@ AI time only, the idle cut out. | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min | | placement | 34.4 | 12.7 | 21.7 | 69 | 5 | 3 | 4.2 min | | routing | 99.3 | 7.8 | 91.5 | 43 | 8 | 0 | 3.7 min |-| pours | 4.6 | 0.7 | 3.9 | 11 | 3 | 1 | 0.4 min |-| current | 13.4 | 1.1 | 12.3 | 11 | 3 | 1 | 0.5 min |+| pours | 9.1 | 0.9 | 8.2 | 16 | 3 | 1 | 0.4 min |+| current | 13.8 | 1.1 | 12.7 | 12 | 4 | 1 | 0.5 min | | thermal | 2.6 | 1.3 | 1.3 | 6 | 3 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min |@@ -40,7 +40,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **217.0** | **80.9** | **136.1** | | | | |+| **total** | **221.8** | **81.1** | **140.8** | | | | |  ## Returns to earlier steps @@ -77,14 +77,15 @@ AI time only, the idle cut out. - 2026-11-09T04:45:24Z clip-start:current-3 - 2026-11-09T04:50:27Z clip-start:thermal-3 - 2026-11-09T04:50:46Z clip-start:pours-3+- 2026-11-09T04:55:38Z clip-start:current-4  ## Where the board stands  - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 0 of 0 route entries-- pours (landed): 1 groups, failed []-- copper kept (mm2 per layer): {"B.Cu":23717.86,"F.Cu":27781.67}-- analyze-current: pass+- pours (landed): 0 groups, failed []+- copper kept (mm2 per layer): {"B.Cu":24245.08,"F.Cu":27783.83}+- analyze-current: fail - analyze-thermal: pass  ## The steps on camera@@ -511,12 +512,34 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  Why the AI came back here: Fields ground offset 15 mV under U1: add GND stitching vias between the pours -**Clip: pours, visit 3 (rework), still recording (started 2026-11-09T04:50:46Z); it appears here when the step ends.**+**Clip: pours, visit 3 (rework), the PCB editor from 2026-11-09T04:50:46Z to 2026-11-09T04:55:18Z. Motion only: 4.5 min of real time, 49 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 3 (rework) clip, what the camera saw.**++![nine frames of pours, visit 3 (rework)](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/pours-3-sheet.png)  **Screenshot: the board when pours, visit 3 (rework) began.**  ![the board when pours, visit 3 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-3-start.png) +**Screenshot: the board when pours, visit 3 (rework) ended.**++![the board when pours, visit 3 (rework) ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-pours-3-end.png)++### current, visit 4 (rework)++What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged++Why the AI came back here: re-solve after GND stitching vias++**Clip: current, visit 4 (rework), still recording (started 2026-11-09T04:55:38Z); it appears here when the step ends.**++**Screenshot: the board when current, visit 4 (rework) began.**++![the board when current, visit 4 (rework) began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-4-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.