65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `thermal`, 211.2 min of AI time since the prompt (263.0 min on the wall clock). This page updates at every step change.+**Running**: step `current`, 211.6 min of AI time since the prompt (263.4 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 211.2 | 52 | the first prompt |-| **all** | | | **211.2** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 211.6 | 52 | the first prompt |+| **all** | | | **211.6** | | |  ## Per step @@ -23,8 +23,8 @@ AI time only, the idle cut out. | placement | 34.4 | 12.7 | 21.7 | 69 | 5 | 3 | 4.2 min | | routing | 99.3 | 7.8 | 91.5 | 43 | 8 | 0 | 3.7 min | | pours | 4.5 | 0.7 | 3.9 | 10 | 2 | 0 | 0.4 min |-| current | 8.7 | 0.7 | 8.0 | 8 | 2 | 0 | 0.5 min |-| thermal | 1.7 | 0.9 | 0.8 | 3 | 2 | 0 | 0.9 min |+| current | 8.8 | 0.7 | 8.1 | 9 | 3 | 1 | 0.5 min |+| thermal | 1.9 | 1.1 | 0.8 | 4 | 2 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -40,7 +40,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **211.2** | **80.1** | **131.2** | | | | |+| **total** | **211.6** | **80.3** | **131.3** | | | | |  ## Returns to earlier steps @@ -48,6 +48,7 @@ AI time only, the idle cut out. - 2026-11-09T03:20:47Z back to **placement** (visit 3): Freerouting left U1 pins 11 (COL1) and 39 (COL12) unrouted: C8/C9 blocked the right-side escape of pins 10-12; caps moved to open it - 2026-11-09T03:31:31Z back to **schematic** (visit 1): STM32 matrix pins re-assigned by side so each column/row leaves the chip toward its keys; the first map forced COL0-2 across the chip and COL11-14 out the board-edge side, leaving pins unroutable - 2026-11-09T04:01:34Z back to **placement** (visit 5): Fields: decoupling caps C3/C5 3.5-5 mm from their STM32 supply pins; power traces came out 0.2 mm because widths were only in the AI Flow spec, not KiCad netclasses+- 2026-11-09T04:45:19Z back to **current** (visit 3):   ## Decisions along the way @@ -72,6 +73,7 @@ AI time only, the idle cut out. - 2026-11-09T04:39:10Z clip-start:pours-2 - 2026-11-09T04:40:34Z clip-start:current-2 - 2026-11-09T04:45:01Z clip-start:thermal-2+- 2026-11-09T04:45:24Z clip-start:current-3  ## Where the board stands @@ -80,6 +82,7 @@ AI time only, the idle cut out. - pours (landed): 1 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":23717.86,"F.Cu":27781.67} - analyze-current: fail+- analyze-thermal: pass  ## The steps on camera @@ -443,19 +446,39 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, visit 2, still recording (started 2026-11-09T04:45:01Z); it appears here when the step ends.**+**Clip: thermal, visit 2, the PCB editor from 2026-11-09T04:45:01Z to 2026-11-09T04:45:20Z. Motion only: 0.3 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 2 clip, what the camera saw.**++![nine frames of thermal, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-2-sheet.png)  **Screenshot: the board when thermal, visit 2 began.**  ![the board when thermal, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-2-start.png) +**Screenshot: the board when thermal, visit 2 ended.**++![the board when thermal, visit 2 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-2-end.png)++### current, visit 3++What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged++**Clip: current, visit 3, still recording (started 2026-11-09T04:45:24Z); it appears here when the step ends.**++**Screenshot: the board when current, visit 3 began.**++![the board when current, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-current-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 8.00 % | 4.00 % | 8.00 % |+| claude | 5h | 8.00 % | 5.00 % | 9.00 % | | claude | Fable | 65.00 % | 65.00 % | 0.00 % | | claude | week | 43.00 % | 44.00 % | 1.00 % |