65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `routing`, 127.0 min of AI time since the prompt (151.0 min on the wall clock). This page updates at every step change.+**Running**: step `placement`, 129.1 min of AI time since the prompt (180.9 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 127.0 | 24 | the first prompt |-| **all** | | | **127.0** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 129.1 | 52 | the first prompt |+| **all** | | | **129.1** | | |  ## Per step @@ -20,8 +20,8 @@ AI time only, the idle cut out. | Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think | |---|---|---|---|---|---|---|---| | intake | 7.0 | 6.8 | 0.1 | 5 | 0 | 0 | 5.8 min |-| placement | 28.1 | 12.1 | 16.0 | 55 | 2 | 1 | 4.2 min |-| routing | 38.6 | 3.7 | 34.9 | 4 | 2 | 0 | 3.7 min |+| placement | 30.1 | 12.1 | 18.1 | 56 | 3 | 2 | 4.2 min |+| routing | 38.6 | 3.7 | 34.9 | 5 | 2 | 0 | 3.7 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -36,11 +36,12 @@ AI time only, the idle cut out. | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min |-| **total** | **127.0** | **71.5** | **55.5** | | | | |+| **total** | **129.1** | **71.5** | **57.5** | | | | |  ## Returns to earlier steps  - 2026-11-09T02:48:09Z back to **placement** (visit 2): router could not escape the STM32: matrix pins faced the board edge and decoupling caps boxed the chip in on all sides; turning U1 180 deg and moving caps to their supply pins+- 2026-11-09T03:20:47Z back to **placement** (visit 3): Freerouting left U1 pins 11 (COL1) and 39 (COL12) unrouted: C8/C9 blocked the right-side escape of pins 10-12; caps moved to open it  ## Decisions along the way @@ -157,7 +158,13 @@ Why the AI came back here: router could not escape the STM32: matrix pins faced  What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai -**Clip: routing, visit 2, still recording (started 2026-11-09T02:53:01Z); it appears here when the step ends.**+**Clip: routing, visit 2, the PCB editor from 2026-11-09T02:53:01Z to 2026-11-09T03:21:11Z. Motion only: 27.8 min of real time, 24 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the routing, visit 2 clip, what the camera saw.**++![nine frames of routing, visit 2](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/routing-2-sheet.png)  **Screenshot: the board when routing, visit 2 began.** @@ -169,7 +176,7 @@ Percent of each plan limit used, as the provider reports it, at the start of the  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 8.00 % | 12.00 % | 4.00 % |+| claude | 5h | 8.00 % | 2.00 % | 6.00 % | | claude | Fable | 65.00 % | 65.00 % | 0.00 % | | claude | week | 43.00 % | 44.00 % | 1.00 % | 

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯