65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `thermal`, 297.1 min of AI time since the prompt (348.9 min on the wall clock). This page updates at every step change.+**Running**: step `silkscreen`, 297.3 min of AI time since the prompt (349.1 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 297.1 | 52 | the first prompt |-| **all** | | | **297.1** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 297.2 | 52 | the first prompt |+| **all** | | | **297.3** | | |  ## Per step @@ -24,7 +24,7 @@ AI time only, the idle cut out. | routing | 99.3 | 7.8 | 91.5 | 43 | 8 | 0 | 3.7 min | | pours | 11.7 | 1.0 | 10.8 | 28 | 5 | 3 | 0.4 min | | current | 55.2 | 1.1 | 54.1 | 20 | 6 | 1 | 0.5 min |-| thermal | 9.0 | 2.1 | 6.9 | 17 | 6 | 0 | 0.9 min |+| thermal | 9.1 | 2.1 | 6.9 | 18 | 6 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |@@ -39,12 +39,12 @@ AI time only, the idle cut out. | project-page | 3.1 | 2.3 | 0.9 | 11 | 0 | 0 | 1.1 min | | rules | 0.8 | 0.8 | 0.0 | 2 | 0 | 0 | 0.8 min | | schematic | 14.6 | 13.8 | 0.8 | 4 | 1 | 1 | 8.6 min |-| silkscreen | 10.1 | 6.6 | 3.5 | 14 | 1 | 0 | 4.8 min |+| silkscreen | 10.2 | 6.6 | 3.6 | 15 | 2 | 0 | 4.8 min | | simulation | 13.6 | 13.6 | 0.0 | 4 | 0 | 0 | 12.8 min | | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.3 | 1.3 | 0.0 | 3 | 0 | 0 | 1.3 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **297.1** | **89.1** | **208.0** | | | | |+| **total** | **297.2** | **89.1** | **208.2** | | | | |  ## Returns to earlier steps @@ -99,6 +99,7 @@ AI time only, the idle cut out. - 2026-11-09T05:50:31Z clip-start:pours-5 - 2026-11-09T05:51:25Z clip-start:current-6 - 2026-11-09T06:10:55Z clip-start:thermal-6+- 2026-11-09T06:11:03Z clip-start:silkscreen-2  ## Where the board stands @@ -107,6 +108,7 @@ AI time only, the idle cut out. - pours (landed): 0 groups, failed [] - copper kept (mm2 per layer): {"B.Cu":24245.08,"F.Cu":27783.83} - analyze-current: pass+- analyze-thermal: pass  ## The steps on camera @@ -758,12 +760,32 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**Clip: thermal, visit 6, still recording (started 2026-11-09T06:10:55Z); it appears here when the step ends.**+**Clip: thermal, visit 6, the PCB editor from 2026-11-09T06:10:55Z to 2026-11-09T06:11:00Z. Motion only: 0.1 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal, visit 6 clip, what the camera saw.**++![nine frames of thermal, visit 6](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/thermal-6-sheet.png)  **Screenshot: the board when thermal, visit 6 began.**  ![the board when thermal, visit 6 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-6-start.png) +**Screenshot: the board when thermal, visit 6 ended.**++![the board when thermal, visit 6 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-thermal-6-end.png)++### silkscreen, visit 2++What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge.++**Clip: silkscreen, visit 2, still recording (started 2026-11-09T06:11:03Z); it appears here when the step ends.**++**Screenshot: the board when silkscreen, visit 2 began.**++![the board when silkscreen, visit 2 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-silkscreen-2-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.