65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T06:37:10Z, 336.5 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T06:37:10Z, 337.6 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-09T00:22:00Z | (open) | 336.4 | 52 | the first prompt |-| **all** | | | **336.5** | | |+| 1 | 2026-11-09T00:22:00Z | (open) | 337.6 | 52 | the first prompt |+| **all** | | | **337.6** | | |  ## Per step @@ -27,14 +27,14 @@ AI time only, the idle cut out. | thermal | 9.2 | 2.1 | 7.0 | 20 | 7 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min | | finish | 3.5 | 0.9 | 2.5 | 6 | 3 | 0 | 0.4 min |-| 3d | 2.4 | 0.1 | 2.2 | 5 | 2 | 0 | 0.1 min |+| 3d | 2.5 | 0.1 | 2.4 | 6 | 3 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min | | fields | 39.1 | 0.3 | 38.8 | 9 | 3 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 1 | 1 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min | | models | 2.0 | 1.2 | 0.8 | 4 | 1 | 0 | 1.1 min |-| nets | 2.3 | 0.1 | 2.1 | 5 | 3 | 0 | 0.1 min |+| nets | 3.3 | 0.1 | 3.1 | 6 | 3 | 0 | 0.1 min | | other | 0.4 | 0.0 | 0.4 | 7 | 0 | 0 | 0.0 min | | outline | 0.4 | 0.1 | 0.3 | 4 | 2 | 1 | 0.1 min | | parts | 3.1 | 1.8 | 1.3 | 5 | 0 | 0 | 1.5 min |@@ -46,7 +46,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 0.4 | 0.0 | 0.4 | 7 | 3 | 0 | 0.0 min |-| **total** | **336.4** | **92.1** | **244.3** | | | | |+| **total** | **337.6** | **92.1** | **245.5** | | | | |  ## Returns to earlier steps @@ -127,6 +127,11 @@ AI time only, the idle cut out. - 2026-11-09T06:36:16Z clip-start:silkscreen-3 - 2026-11-09T06:36:28Z clip-start:finish-3 - 2026-11-09T06:50:14Z clip-start:nets-3+- 2026-11-09T06:50:58Z net GND: 145 items highlighted+- 2026-11-09T06:51:03Z net +3V3: 100 items highlighted+- 2026-11-09T06:51:07Z net VBUS: 35 items highlighted+- 2026-11-09T06:51:11Z net VBUS_IN: 18 items highlighted+- 2026-11-09T06:51:23Z clip-start:3d-3  ## Where the board stands @@ -1175,12 +1180,32 @@ What this step does: the fields on the board: adom-fields solves the current den  What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one -**Clip: nets, visit 3, still recording (started 2026-11-09T06:50:14Z); it appears here when the step ends.**+**Clip: nets, visit 3, the PCB editor from 2026-11-09T06:50:14Z to 2026-11-09T06:51:17Z. Motion only: 1.0 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the nets, visit 3 clip, what the camera saw.**++![nine frames of nets, visit 3](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/nets-3-sheet.png)  **Screenshot: the board when nets, visit 3 began.**  ![the board when nets, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-3-start.png) +**Screenshot: the board when nets, visit 3 ended.**++![the board when nets, visit 3 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-nets-3-end.png)++### 3d, visit 3++What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse++**Clip: 3d, visit 3, still recording (started 2026-11-09T06:51:23Z); it appears here when the step ends.**++**Screenshot: the board when 3d, visit 3 began.**++![the board when 3d, visit 3 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-3d-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.