65% MX Keyboard (soldered)

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T21:25:59Z, 567.1 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.+**finish ran with 3 open item(s); not cleared for fabrication** (2026-11-09T21:25:59Z, 567.3 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-09T00:22:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-11-09T17:22:57Z | (open) | 5.6 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 7 | 2026-11-09T17:46:18Z | (open) | 18.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) | | 8 | 2026-11-09T19:50:33Z | (open) | 95.4 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| 9 | 2026-11-09T21:59:30Z | (open) | 40.5 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |-| **all** | | | **567.1** | | |+| 9 | 2026-11-09T21:59:30Z | (open) | 40.7 | 0 | follow-up (no prompt mark; say `prompt --text` next time) |+| **all** | | | **567.3** | | |  ## Per step @@ -34,11 +34,11 @@ AI time only, the idle cut out. | current | 90.2 | 1.2 | 89.0 | 36 | 12 | 4 | 0.5 min | | thermal | 10.3 | 2.1 | 8.2 | 30 | 12 | 0 | 0.9 min | | capture | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| finish | 8.4 | 1.0 | 7.4 | 18 | 10 | 0 | 0.4 min |+| finish | 8.5 | 1.0 | 7.5 | 18 | 10 | 0 | 0.4 min | | 3d | 8.3 | 0.1 | 8.2 | 16 | 6 | 0 | 0.1 min | | components | 1.0 | 0.1 | 0.9 | 3 | 1 | 0 | 0.1 min | | design | 8.6 | 8.6 | 0.0 | 3 | 0 | 0 | 8.6 min |-| export | 26.5 | 14.1 | 12.4 | 49 | 6 | 0 | 4.2 min |+| export | 26.7 | 14.1 | 12.6 | 50 | 7 | 0 | 4.2 min | | fields | 80.2 | 0.3 | 79.9 | 15 | 6 | 1 | 0.2 min | | libraries | 0.1 | 0.1 | 0.1 | 1 | 1 | 0 | 0.1 min | | library | 2.4 | 2.4 | 0.0 | 4 | 0 | 0 | 2.4 min |@@ -55,7 +55,7 @@ AI time only, the idle cut out. | sourcing | 4.5 | 4.5 | 0.0 | 7 | 0 | 0 | 4.5 min | | test-plan | 1.5 | 1.3 | 0.2 | 5 | 1 | 0 | 1.3 min | | thermal-vias | 1.4 | 0.0 | 1.4 | 10 | 4 | 1 | 0.0 min |-| **total** | **567.1** | **159.1** | **408.0** | | | | |+| **total** | **567.3** | **159.1** | **408.2** | | | | |  ## Returns to earlier steps @@ -198,6 +198,7 @@ AI time only, the idle cut out. - 2026-11-09T22:38:27Z clip-start:silkscreen-10 - 2026-11-09T22:38:42Z clip-start:3d-6 - 2026-11-09T22:40:00Z clip-start:finish-10+- 2026-11-09T22:40:08Z clip-start:export-7  ## Where the board stands @@ -1859,12 +1860,32 @@ What this step does: the 3D walkthrough: the viewer opened from the editor, then  What this step does: finish refuses until everything is true; the AI cuts the video and delivers -**Clip: finish, visit 10, still recording (started 2026-11-09T22:40:00Z); it appears here when the step ends.**+**Clip: finish, visit 10, the PCB editor from 2026-11-09T22:40:00Z to 2026-11-09T22:40:05Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-10.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the finish, visit 10 clip, what the camera saw.**++![nine frames of finish, visit 10](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/finish-10-sheet.png)  **Screenshot: the board when finish, visit 10 began.**  ![the board when finish, visit 10 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-10-start.png) +**Screenshot: the board when finish, visit 10 ended.**++![the board when finish, visit 10 ended](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-finish-10-end.png)++### export, visit 7++What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.++**Clip: export, visit 7, still recording (started 2026-11-09T22:40:08Z); it appears here when the step ends.**++**Screenshot: the board when export, visit 7 began.**++![the board when export, visit 7 began](/blob/app/65-keyboard/docs/runs/65-keyboard-claude-opus-5-5-20261109-0022/shot-export-7-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.