AFS_Adom flight computer molecule

@@ -1,6 +1,6 @@ # AI Flow run: Claude Fable 5.1 on board-0 -**Running**: step `pours`, 405.5 min of AI time since the prompt (455.7 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 407.6 min of AI time since the prompt (457.8 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-15T20:55:00Z | (open) | 405.4 | 50 | the first prompt |-| **all** | | | **405.5** | | |+| 1 | 2026-10-15T20:55:00Z | (open) | 407.6 | 50 | the first prompt |+| **all** | | | **407.6** | | |  ## Per step @@ -21,8 +21,8 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min | | placement | 28.9 | 8.3 | 20.6 | 79 | 17 | 14 | 3.0 min |-| routing | 166.2 | 52.4 | 113.8 | 103 | 16 | 2 | 13.0 min |-| pours | 25.6 | 0.0 | 25.6 | 30 | 7 | 4 | 0.0 min |+| routing | 165.9 | 52.4 | 113.5 | 103 | 16 | 2 | 13.0 min |+| pours | 28.0 | 0.0 | 28.0 | 33 | 7 | 4 | 0.0 min | | current | 16.5 | 0.0 | 16.5 | 59 | 6 | 0 | 0.0 min | | capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min | | components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min |@@ -30,13 +30,13 @@ AI time only, the idle cut out. | libraries | 2.8 | 1.8 | 1.0 | 4 | 1 | 0 | 1.1 min | | models | 1.2 | 0.8 | 0.4 | 6 | 1 | 0 | 0.5 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| outline | 5.6 | 0.0 | 5.6 | 18 | 6 | 0 | 0.0 min |+| outline | 5.6 | 0.0 | 5.6 | 19 | 7 | 0 | 0.0 min | | rules | 5.8 | 5.7 | 0.1 | 6 | 1 | 0 | 5.7 min | | simulation | 0.4 | 0.2 | 0.2 | 7 | 0 | 0 | 0.2 min | | sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min | | test-plan | 2.8 | 1.3 | 1.4 | 8 | 2 | 1 | 1.1 min | | thermal-vias | 7.5 | 0.0 | 7.5 | 24 | 3 | 0 | 0.0 min |-| **total** | **405.4** | **209.8** | **195.6** | | | | |+| **total** | **407.6** | **209.8** | **197.8** | | | | |  ## Returns to earlier steps @@ -131,6 +131,7 @@ AI time only, the idle cut out. - 2026-10-16T04:24:20Z clip-start:outline-6 - 2026-10-16T04:24:43Z clip-start:current-6 - 2026-10-16T04:30:40Z clip-start:pours-7+- 2026-10-16T04:32:49Z clip-start:outline-7  ## Where the board stands @@ -1315,12 +1316,32 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  Why the AI came back here: Fields: the VBAT_IN patch wrapped the XT30 GND pin and starved the GND pours' path to it (206 A/mm2 on B.Cu); notch it; the band vias for VBAT/VBAT_IN never landed because the pour planner's own U1 via blocked land vias; VSYS trunk patch beside L2 -**Clip: pours, visit 7 (rework), still recording (started 2026-10-16T04:30:40Z); it appears here when the step ends.**+**Clip: pours, visit 7 (rework), the PCB editor from 2026-10-16T04:30:40Z to 2026-10-16T04:32:34Z. Motion only: 1.9 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-7.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 7 (rework) clip, what the camera saw.**++![nine frames of pours, visit 7 (rework)](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-7-sheet.png)  **Screenshot: the board when pours, visit 7 (rework) began.**  ![the board when pours, visit 7 (rework) began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-7-start.png) +**Screenshot: the board when pours, visit 7 (rework) ended.**++![the board when pours, visit 7 (rework) ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-7-end.png)++### outline, visit 7++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 7, still recording (started 2026-10-16T04:32:49Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 7 began.**++![the board when outline, visit 7 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-outline-7-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.@@ -1329,7 +1350,7 @@ Percent of each plan limit used, as the provider reports it, at the start of the |---|---|---|---|---| | claude | 5h | 17 % | 10 % | -7.0 % | | claude | Fable | 52 % | 73 % | 21.0 % |-| claude | week | 42 % | 52 % | 10.0 % |+| claude | week | 42 % | 53 % | 11.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*