AFS_Adom flight computer molecule

@@ -1,6 +1,6 @@ # AI Flow run: Claude Fable 5.1 on board-0 -**Running**: step `pours`, 347.0 min of AI time since the prompt (397.2 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 364.7 min of AI time since the prompt (415.0 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-15T20:55:00Z | (open) | 346.9 | 50 | the first prompt |-| **all** | | | **347.0** | | |+| 1 | 2026-10-15T20:55:00Z | (open) | 364.7 | 50 | the first prompt |+| **all** | | | **364.7** | | |  ## Per step @@ -21,8 +21,8 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min | | placement | 28.9 | 8.3 | 20.6 | 79 | 17 | 14 | 3.0 min |-| routing | 146.2 | 52.4 | 93.8 | 92 | 14 | 0 | 13.0 min |-| pours | 6.1 | 0.0 | 6.1 | 12 | 3 | 2 | 0.0 min |+| routing | 147.8 | 52.4 | 95.4 | 92 | 14 | 0 | 13.0 min |+| pours | 22.3 | 0.0 | 22.3 | 17 | 3 | 2 | 0.0 min | | current | 1.7 | 0.0 | 1.7 | 10 | 2 | 0 | 0.0 min | | capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min | | components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min |@@ -30,13 +30,13 @@ AI time only, the idle cut out. | libraries | 2.8 | 1.8 | 1.0 | 4 | 1 | 0 | 1.1 min | | models | 1.2 | 0.8 | 0.4 | 6 | 1 | 0 | 0.5 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| outline | 2.3 | 0.0 | 2.3 | 6 | 2 | 0 | 0.0 min |+| outline | 2.3 | 0.0 | 2.3 | 7 | 3 | 0 | 0.0 min | | rules | 5.8 | 5.7 | 0.1 | 6 | 1 | 0 | 5.7 min | | simulation | 0.4 | 0.2 | 0.2 | 7 | 0 | 0 | 0.2 min | | sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min | | test-plan | 2.8 | 1.3 | 1.4 | 8 | 2 | 1 | 1.1 min | | thermal-vias | 6.6 | 0.0 | 6.6 | 18 | 1 | 0 | 0.0 min |-| **total** | **346.9** | **209.8** | **137.1** | | | | |+| **total** | **364.7** | **209.8** | **154.9** | | | | |  ## Returns to earlier steps @@ -109,6 +109,7 @@ AI time only, the idle cut out. - 2026-10-16T03:24:25Z clip-start:outline-2 - 2026-10-16T03:24:48Z clip-start:current-2 - 2026-10-16T03:32:10Z clip-start:pours-3+- 2026-10-16T03:49:56Z clip-start:outline-3  ## Where the board stands @@ -957,19 +958,39 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  Why the AI came back here: Fields: the 8 A ground return squeezes through an F.Cu neck and 7 stitching gaps; spec.stitchVias was a pitch map, not the explicit point list the planner reads, so no stitching via was planned. 52 GND stitching vias on an 8 mm grid, checked against the live copper -**Clip: pours, visit 3 (rework), still recording (started 2026-10-16T03:32:10Z); it appears here when the step ends.**+**Clip: pours, visit 3 (rework), the PCB editor from 2026-10-16T03:32:10Z to 2026-10-16T03:48:18Z. Motion only: 16.1 min of real time, 12 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 3 (rework) clip, what the camera saw.**++![nine frames of pours, visit 3 (rework)](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-3-sheet.png)  **Screenshot: the board when pours, visit 3 (rework) began.**  ![the board when pours, visit 3 (rework) began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-3-start.png) +**Screenshot: the board when pours, visit 3 (rework) ended.**++![the board when pours, visit 3 (rework) ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-3-end.png)++### outline, visit 3++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 3, still recording (started 2026-10-16T03:49:56Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 3 began.**++![the board when outline, visit 3 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-outline-3-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 83 % | 66.0 % |+| claude | 5h | 17 % | 0 % | -17.0 % | | claude | Fable | 52 % | 70 % | 18.0 % | | claude | week | 42 % | 51 % | 9.0 % |