AFS_Adom flight computer molecule

@@ -1,6 +1,6 @@ # AI Flow run: Claude Fable 5.1 on board-0 -**Running**: step `pours`, 447.2 min of AI time since the prompt (497.4 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 448.3 min of AI time since the prompt (498.5 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-15T20:55:00Z | (open) | 447.1 | 50 | the first prompt |-| **all** | | | **447.2** | | |+| 1 | 2026-10-15T20:55:00Z | (open) | 448.3 | 50 | the first prompt |+| **all** | | | **448.3** | | |  ## Per step @@ -21,8 +21,8 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min | | placement | 28.9 | 8.3 | 20.6 | 79 | 17 | 14 | 3.0 min |-| routing | 177.1 | 52.4 | 124.7 | 111 | 17 | 3 | 13.0 min |-| pours | 31.9 | 0.0 | 31.9 | 38 | 9 | 5 | 0.0 min |+| routing | 177.0 | 52.4 | 124.5 | 111 | 17 | 3 | 13.0 min |+| pours | 33.2 | 0.0 | 33.2 | 41 | 9 | 5 | 0.0 min | | current | 36.8 | 0.0 | 36.8 | 94 | 8 | 0 | 0.0 min | | capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min | | components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min |@@ -30,13 +30,13 @@ AI time only, the idle cut out. | libraries | 2.8 | 1.8 | 1.0 | 4 | 1 | 0 | 1.1 min | | models | 1.2 | 0.8 | 0.4 | 6 | 1 | 0 | 0.5 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| outline | 6.9 | 0.0 | 6.9 | 24 | 8 | 0 | 0.0 min |+| outline | 6.9 | 0.0 | 6.9 | 25 | 9 | 0 | 0.0 min | | rules | 5.8 | 5.7 | 0.1 | 6 | 1 | 0 | 5.7 min | | simulation | 0.4 | 0.2 | 0.2 | 7 | 0 | 0 | 0.2 min | | sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min | | test-plan | 2.8 | 1.3 | 1.4 | 8 | 2 | 1 | 1.1 min | | thermal-vias | 10.5 | 0.0 | 10.5 | 27 | 4 | 0 | 0.0 min |-| **total** | **447.1** | **209.8** | **237.3** | | | | |+| **total** | **448.3** | **209.8** | **238.5** | | | | |  ## Returns to earlier steps @@ -141,12 +141,14 @@ AI time only, the idle cut out. - 2026-10-16T05:03:57Z clip-start:routing-17 - 2026-10-16T05:09:36Z clip-start:thermal-vias-4 - 2026-10-16T05:12:21Z clip-start:pours-9+- 2026-10-16T05:13:29Z clip-start:outline-9  ## Where the board stands  - routing: 0 unrouted after null passes - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 6 of 2 route entries+- pours (landed): 1 groups, failed []  ## The steps on camera @@ -1486,12 +1488,32 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**Clip: pours, visit 9, still recording (started 2026-10-16T05:12:21Z); it appears here when the step ends.**+**Clip: pours, visit 9, the PCB editor from 2026-10-16T05:12:21Z to 2026-10-16T05:13:17Z. Motion only: 0.9 min of real time, 7 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-9.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 9 clip, what the camera saw.**++![nine frames of pours, visit 9](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-9-sheet.png)  **Screenshot: the board when pours, visit 9 began.**  ![the board when pours, visit 9 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-9-start.png) +**Screenshot: the board when pours, visit 9 ended.**++![the board when pours, visit 9 ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-9-end.png)++### outline, visit 9++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 9, still recording (started 2026-10-16T05:13:29Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 9 began.**++![the board when outline, visit 9 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-outline-9-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.