AFS_Adom flight computer molecule

@@ -1,6 +1,6 @@ # AI Flow run: Claude Fable 5.1 on board-0 -**Running**: step `pours`, 398.1 min of AI time since the prompt (448.3 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 399.1 min of AI time since the prompt (449.4 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-15T20:55:00Z | (open) | 398.1 | 50 | the first prompt |-| **all** | | | **398.1** | | |+| 1 | 2026-10-15T20:55:00Z | (open) | 399.1 | 50 | the first prompt |+| **all** | | | **399.1** | | |  ## Per step @@ -21,8 +21,8 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min | | placement | 28.9 | 8.3 | 20.6 | 79 | 17 | 14 | 3.0 min |-| routing | 164.4 | 52.4 | 112.0 | 103 | 16 | 2 | 13.0 min |-| pours | 24.6 | 0.0 | 24.6 | 26 | 6 | 3 | 0.0 min |+| routing | 164.6 | 52.4 | 112.1 | 103 | 16 | 2 | 13.0 min |+| pours | 25.6 | 0.0 | 25.6 | 29 | 6 | 3 | 0.0 min | | current | 12.3 | 0.0 | 12.3 | 44 | 5 | 0 | 0.0 min | | capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min | | components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min |@@ -30,13 +30,13 @@ AI time only, the idle cut out. | libraries | 2.8 | 1.8 | 1.0 | 4 | 1 | 0 | 1.1 min | | models | 1.2 | 0.8 | 0.4 | 6 | 1 | 0 | 0.5 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| outline | 5.2 | 0.0 | 5.2 | 15 | 5 | 0 | 0.0 min |+| outline | 5.2 | 0.0 | 5.2 | 16 | 6 | 0 | 0.0 min | | rules | 5.8 | 5.7 | 0.1 | 6 | 1 | 0 | 5.7 min | | simulation | 0.4 | 0.2 | 0.2 | 7 | 0 | 0 | 0.2 min | | sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min | | test-plan | 2.8 | 1.3 | 1.4 | 8 | 2 | 1 | 1.1 min | | thermal-vias | 7.5 | 0.0 | 7.5 | 24 | 3 | 0 | 0.0 min |-| **total** | **398.1** | **209.8** | **188.2** | | | | |+| **total** | **399.1** | **209.8** | **189.3** | | | | |  ## Returns to earlier steps @@ -127,12 +127,14 @@ AI time only, the idle cut out. - 2026-10-16T04:17:09Z clip-start:routing-16 - 2026-10-16T04:23:07Z clip-start:thermal-vias-3 - 2026-10-16T04:23:17Z clip-start:pours-6+- 2026-10-16T04:24:20Z clip-start:outline-6  ## Where the board stands  - routing: 0 unrouted after null passes - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 13 of 5 route entries+- pours (landed): 1 groups, failed []  ## The steps on camera @@ -1246,12 +1248,32 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**Clip: pours, visit 6, still recording (started 2026-10-16T04:23:17Z); it appears here when the step ends.**+**Clip: pours, visit 6, the PCB editor from 2026-10-16T04:23:17Z to 2026-10-16T04:24:10Z. Motion only: 0.9 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours, visit 6 clip, what the camera saw.**++![nine frames of pours, visit 6](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/pours-6-sheet.png)  **Screenshot: the board when pours, visit 6 began.**  ![the board when pours, visit 6 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-6-start.png) +**Screenshot: the board when pours, visit 6 ended.**++![the board when pours, visit 6 ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-6-end.png)++### outline, visit 6++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, visit 6, still recording (started 2026-10-16T04:24:20Z); it appears here when the step ends.**++**Screenshot: the board when outline, visit 6 began.**++![the board when outline, visit 6 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-outline-6-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.