AFS_Adom flight computer molecule

@@ -0,0 +1,167 @@+# AI Flow run: Claude Fable 5.1 on board-0++**Running**: step `placement`, 153.2 min of AI time since the prompt (153.2 min on the wall clock). This page updates at every step change.++Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out.++## Sessions++One row per human prompt: the AI's time on it, unobserved gaps excluded by the heuristic, which may include external AI work.++| Session | Prompt at | Done at | AI time min | Unobserved gap min | What |+|---|---|---|---|---|---|+| 1 | 2026-10-15T20:55:00Z | (open) | 153.2 | 0 | the first prompt |+| **all** | | | **153.2** | | |++## Per step++AI time only, the idle cut out.++| Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think |+|---|---|---|---|---|---|---|---|+| intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min |+| placement | 0.6 | 0.5 | 0.1 | 3 | 1 | 0 | 0.5 min |+| capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min |+| components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min |+| design | 1.6 | 0.8 | 0.8 | 2 | 0 | 0 | 0.8 min |+| libraries | 2.8 | 1.8 | 1.0 | 4 | 1 | 0 | 1.1 min |+| models | 1.2 | 0.8 | 0.4 | 6 | 1 | 0 | 0.5 min |+| other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |+| rules | 5.8 | 5.7 | 0.1 | 6 | 1 | 0 | 5.7 min |+| simulation | 0.4 | 0.2 | 0.2 | 7 | 0 | 0 | 0.2 min |+| sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min |+| test-plan | 0.3 | 0.2 | 0.1 | 2 | 1 | 0 | 0.2 min |+| **total** | **153.2** | **148.5** | **4.7** | | | | |++## Decisions along the way++- 2026-10-15T23:03:45Z clip-start:rules-1+- 2026-10-15T23:10:20Z clip-start:sourcing-1+- 2026-10-15T23:16:57Z clip-start:design-1+- 2026-10-15T23:17:55Z clip-start:simulation-1+- 2026-10-15T23:26:03Z clip-start:models-1+- 2026-10-15T23:27:23Z clip-start:test-plan-1+- 2026-10-15T23:27:40Z clip-start:placement-1++## Where the board stands+++## The steps on camera++One clip per step visit, sped up 10x, with the editor at the start and the end of the visit. A caption above every clip and screenshot says what it shows.++### rules++What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it.++**Clip: rules, the PCB editor from 2026-10-15T23:03:45Z to 2026-10-15T23:09:29Z. Motion only: 5.7 min of real time, 145 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/rules-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the rules clip, what the camera saw.**++![nine frames of rules](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/rules-1-sheet.png)++### sourcing++What this step does: ++**Clip: sourcing, the PCB editor from 2026-10-15T23:10:20Z to 2026-10-15T23:16:08Z. Motion only: 5.8 min of real time, 120 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/sourcing-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the sourcing clip, what the camera saw.**++![nine frames of sourcing](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/sourcing-1-sheet.png)++### design++What this step does: ++**Clip: design, the PCB editor from 2026-10-15T23:16:57Z to 2026-10-15T23:17:45Z. Motion only: 0.8 min of real time, 16 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/design-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the design clip, what the camera saw.**++![nine frames of design](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/design-1-sheet.png)++### simulation++What this step does: ++**Clip: simulation, the PCB editor from 2026-10-15T23:17:55Z to 2026-10-15T23:18:08Z. Motion only: 0.2 min of real time, 6 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/simulation-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the simulation clip, what the camera saw.**++![nine frames of simulation](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/simulation-1-sheet.png)++### models++What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets.++**Clip: models, the PCB editor from 2026-10-15T23:26:03Z to 2026-10-15T23:27:16Z. Motion only: 1.2 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/models-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the models clip, what the camera saw.**++![nine frames of models](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/models-1-sheet.png)++**Screenshot: the board when models began.**++![the board when models began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-models-1-start.png)++**Screenshot: the board when models ended.**++![the board when models ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-models-1-end.png)++### test-plan++What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.++**Clip: test-plan, the PCB editor from 2026-10-15T23:27:23Z to 2026-10-15T23:27:36Z. Motion only: 0.2 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/test-plan-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the test-plan clip, what the camera saw.**++![nine frames of test-plan](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/test-plan-1-sheet.png)++**Screenshot: the board when test-plan began.**++![the board when test-plan began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-test-plan-1-start.png)++**Screenshot: the board when test-plan ended.**++![the board when test-plan ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-test-plan-1-end.png)++### placement++What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here++**Clip: placement, still recording (started 2026-10-15T23:27:40Z); it appears here when the step ends.**++**Screenshot: the board when placement began.**++![the board when placement began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-placement-1-start.png)++## Plan usage, the second cost line++Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.++| Provider | Limit | At start | At end | Used by this run |+|---|---|---|---|---|+| claude | 5h | 17 % | 21 % | 4.0 % |+| claude | Fable | 52 % | 54 % | 2.0 % |+| claude | week | 42 % | 43 % | 1.0 % |++*The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*++## Given back++0 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user.++Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.