AFS_Adom flight computer molecule

@@ -1,6 +1,6 @@ # AI Flow run: Claude Fable 5.1 on board-0 -**Running**: step `current`, 462.9 min of AI time since the prompt (974.2 min on the wall clock). This page updates at every step change.+**Running**: step `pours`, 469.1 min of AI time since the prompt (980.4 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-15T20:55:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-15T20:55:00Z | (open) | 462.9 | 511 | the first prompt |-| **all** | | | **462.9** | | |+| 1 | 2026-10-15T20:55:00Z | (open) | 469.1 | 511 | the first prompt |+| **all** | | | **469.1** | | |  ## Per step @@ -21,9 +21,9 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 128.8 | 128.7 | 0.1 | 4 | 1 | 0 | 128.7 min | | placement | 28.9 | 8.3 | 20.6 | 79 | 17 | 14 | 3.0 min |-| routing | 178.6 | 52.4 | 126.2 | 111 | 17 | 3 | 13.0 min |-| pours | 40.8 | 0.0 | 40.8 | 45 | 10 | 6 | 0.0 min |-| current | 41.1 | 0.0 | 41.1 | 112 | 10 | 0 | 0.0 min |+| routing | 180.3 | 52.4 | 127.9 | 111 | 17 | 3 | 13.0 min |+| pours | 40.8 | 0.0 | 40.8 | 46 | 11 | 7 | 0.0 min |+| current | 45.6 | 0.0 | 45.6 | 127 | 10 | 0 | 0.0 min | | capture | 0.9 | 0.0 | 0.9 | 1 | 0 | 0 | 0.0 min | | components | 4.2 | 4.0 | 0.1 | 5 | 1 | 0 | 2.3 min | | design | 1.6 | 0.8 | 0.8 | 2 | 0 | 0 | 0.8 min |@@ -36,7 +36,7 @@ AI time only, the idle cut out. | sourcing | 6.6 | 5.8 | 0.9 | 6 | 0 | 0 | 5.8 min | | test-plan | 2.8 | 1.3 | 1.4 | 8 | 2 | 1 | 1.1 min | | thermal-vias | 10.5 | 0.0 | 10.5 | 27 | 4 | 0 | 0.0 min |-| **total** | **462.9** | **209.8** | **253.0** | | | | |+| **total** | **469.1** | **209.8** | **259.2** | | | | |  ## Returns to earlier steps @@ -64,6 +64,7 @@ AI time only, the idle cut out. - 2026-10-16T04:38:46Z back to **pours** (visit 8): Fields: VBAT_IN strip widened to the TVS GND pad (153 A/mm2 at the notch), VSYS patch between the L2 pads (125 A/mm2), VBAT/VBAT_IN band vias re-checked against the rerouted +5V (the planner refused the whole batch at one via) - 2026-10-16T05:02:03Z back to **routing** (visit 17): Fields: VSYS enters the bucks and passes the inductors on 0.3-0.4 mm pieces (109-129 A/mm2 at 1.5 A); reroute VSYS at 0.8/0.6/0.5 mm - 2026-10-16T13:07:02Z back to **pours** (visit 10): Fields: VSYS trunk through the TP4 pad (114 A/mm2), VBAT_IN strip extended under the shunt pad; loads moved to the 4 A sustained figure on the record+- 2026-10-16T13:14:41Z back to **pours** (visit 11): Fields: the rerouted VSYS trunk (0.5 mm from Q1.3 to TP4 and on to the bucks) at 111 A/mm2; VSYS copper bands along it  ## Decisions along the way @@ -148,6 +149,7 @@ AI time only, the idle cut out. - 2026-10-16T13:07:05Z clip-start:pours-10 - 2026-10-16T13:08:43Z clip-start:outline-10 - 2026-10-16T13:09:09Z clip-start:current-10+- 2026-10-16T13:15:21Z clip-start:pours-11  ## Where the board stands @@ -1594,12 +1596,34 @@ What this step does: Round the board's corners: every sharp outline corner becom  What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged -**Clip: current, visit 10, still recording (started 2026-10-16T13:09:09Z); it appears here when the step ends.**+**Clip: current, visit 10, the PCB editor from 2026-10-16T13:09:09Z to 2026-10-16T13:14:43Z. Motion only: 5.6 min of real time, 7 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/current-10.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the current, visit 10 clip, what the camera saw.**++![nine frames of current, visit 10](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/current-10-sheet.png)  **Screenshot: the board when current, visit 10 began.**  ![the board when current, visit 10 began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-current-10-start.png) +**Screenshot: the board when current, visit 10 ended.**++![the board when current, visit 10 ended](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-current-10-end.png)++### pours, visit 11 (rework)++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++Why the AI came back here: Fields: the rerouted VSYS trunk (0.5 mm from Q1.3 to TP4 and on to the bucks) at 111 A/mm2; VSYS copper bands along it++**Clip: pours, visit 11 (rework), still recording (started 2026-10-16T13:15:21Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 11 (rework) began.**++![the board when pours, visit 11 (rework) began](/blob/app/afs-adom/docs/runs/AFS_Adom-claude-fable-5-1-20261015-2055/shot-pours-11-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.