component
ZXLD1362ET5TA
Public Made by Adomby adom
Diodes Incorporated LED Drivers, TSOT-25. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C154735). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−7
page.json+7−5@@ -26,13 +26,15 @@ "model_3d_step": "zxld1362et5ta.step", "lbr": "zxld1362et5ta.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C154735"+ }, "pins": [ { "number": "1", "name": "LX", "type": "output",- "description": "Drain of the internal NDMOS switch. Connects to the inductor and freewheel diode in the buck converter topology. Absolute max LX voltage -0.3 to +65V; continuous switch current 1A; RDS(on) typ 0.5Ω @ 1A."+ "description": "Drain of the internal NDMOS switch. Connects to the inductor and freewheel diode in the buck converter topology. Absolute max LX voltage -0.3 to +65V; continuous switch current 1A; RDS(on) typ 0.5\u03a9 @ 1A." }, { "number": "2",@@ -44,19 +46,19 @@ "number": "3", "name": "ADJ", "type": "input",- "description": "Multi-function On/Off and brightness control pin. Leave floating for nominal operation (VADJ = VREF = 1.25V, IOUTnom = 0.1/RS). Drive below 0.2V to disable output; drive with 0.3V-2.5V DC to set output current between 25% and 200% of nominal, or apply a PWM waveform (up to 1000:1 range) for LED dimming. A capacitor from ADJ to GND sets soft-start (~200µs/nF)."+ "description": "Multi-function On/Off and brightness control pin. Leave floating for nominal operation (VADJ = VREF = 1.25V, IOUTnom = 0.1/RS). Drive below 0.2V to disable output; drive with 0.3V-2.5V DC to set output current between 25% and 200% of nominal, or apply a PWM waveform (up to 1000:1 range) for LED dimming. A capacitor from ADJ to GND sets soft-start (~200\u00b5s/nF)." }, { "number": "4", "name": "ISENSE", "type": "input",- "description": "Current sense input. Connect resistor RS from this pin to VIN to define nominal average LED output current IOUTnom = 0.1/RS (VSENSE typ 100mV). RSMIN = 0.1Ω with ADJ pin open. Absolute max VSENSE = +0.3 to -5V (with respect to VIN)."+ "description": "Current sense input. Connect resistor RS from this pin to VIN to define nominal average LED output current IOUTnom = 0.1/RS (VSENSE typ 100mV). RSMIN = 0.1\u03a9 with ADJ pin open. Absolute max VSENSE = +0.3 to -5V (with respect to VIN)." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input supply voltage (6V to 60V operating; absolute max -0.3 to +65V). Decouple to GND with a 4.7µF or higher X7R ceramic capacitor placed close to the device. VIN > 16V recommended to fully enhance the internal output transistor."+ "description": "Input supply voltage (6V to 60V operating; absolute max -0.3 to +65V). Decouple to GND with a 4.7\u00b5F or higher X7R ceramic capacitor placed close to the device. VIN > 16V recommended to fully enhance the internal output transistor." } ], "provenance": {
zxld1362et5ta.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="ZXLD1362ET5TA">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="VIN" pad="5"/> <connect gate="G$1" pin="ISENSE" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="ZXLD1362ET5TA" constant="no"/>+ <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+ <attribute name="LCSC_PN" value="C154735" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>