component
ZXLD1360ET5TA
Public Made by Adomby adom
Diodes Incorporated LED Drivers, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownZXLD1360ET5TA
Diodes Incorporated · LED Drivers · TSOT-23-5
ZXLD1360ET5TA from Diodes Incorporated, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal NDMOS switch; absolute maximum -0.3 to +30V (40V for 0.5 sec) and switch current up to 1.25A. |
| 2 | GND | power_in | Ground (0V) reference for the device. |
| 3 | ADJ | input | Multi-function on/off and brightness control pin: leave floating for nominal output current (VADJ = 1.25V), drive below 0.2V to turn off output, or drive 0.3V to 2.5V DC or PWM to adjust output current. |
| 4 | ISENSE | input | Connect resistor RS from this pin to VIN to set nominal average output current IOUTnom = 0.1/RS. |
| 5 | VIN | power_in | Input voltage pin, 7V to 30V; decouple to ground with a 4.7µF or higher X7R ceramic capacitor close to the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-23-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | 30 | V | 40V for 0.5 sec | 3 | |
| ISENSE Voltage | VSENSE | -5 | 0.3 | V | measured with respect to VIN | 3 | |
| LX Output Voltage | VLX | -0.3 | 30 | V | 40V for 0.5 sec | 3 | |
| Adjust Pin Input Voltage | VADJ | -0.3 | 6 | V | 3 | ||
| Switch Output Current | ILX | 1.25 | A | 3 | |||
| Power Dissipation | PTOT | 1 | W | Refer to package thermal de-rating curve | 3 | ||
| Storage Temperature | TST | -55 | 150 | °C | 3 | ||
| Junction Temperature | TJ MAX | 150 | °C | 3 | |||
| ESD Human Body Model | 500 | V | Human Body Model | 3 | |||
| Junction to Ambient | θJA | 82 | °C/W | 3 | |||
| Junction to Board | ΨJB | 33 | °C/W | 3 | |||
| Input Voltage Range | VIN | 7 | 30 | V | 3 | ||
| Maximum recommended continuous/RMS switch current | ILX | 1 | A | 3 | |||
| External control voltage range on ADJ pin for DC brightness control | VADJ | 0.3 | 2.5 | V | 3 | ||
| DC voltage on ADJ pin to ensure device is off | VADJoff | 0.25 | V | 3 | |||
| Recommended minimum switch ON time | tONmin_REC | 800 | ns | 3 | |||
| Recommended maximum operating frequency | fLX max | 625 | kHz | 3 | |||
| Duty cycle range | DLX | 0.01 | 0.99 | 3 | |||
| Ambient operating temperature range | TA | -40 | 125 | °C | 3 | ||
| Internal regulator start-up threshold | VSU | 5.65 | V | VIN rising | 4 | ||
| Internal regulator shutdown threshold | VSD | 5.55 | V | VIN falling | 4 | ||
| Quiescent supply current with output off | IINQoff | 20 | 40 | µA | ADJ pin grounded | 4 | |
| Quiescent supply current with output switching | IINQon | 1.8 | 5 | mA | ADJ pin floating, f=250kHz | 4 | |
| Mean current sense threshold voltage | VSENSE | 95 | 100 | 105 | mV | VADJ = 1.25V, measured on ISENSE pin with respect to VIN | 4 |
| Sense threshold hysteresis | VSENSEHYS | -15 | 15 | % | 4 | ||
| ISENSE pin input current | ISENSE | 1.25 | 10 | µA | VSENSE = VIN-0.1 | 4 | |
| Internal reference voltage | VREF | 1.25 | V | Measured on ADJ pin with pin floating | 4 | ||
| Temperature coefficient of VREF | ΔVREF/ΔT | 50 | ppm/°C | 4 | |||
| External control voltage range on ADJ pin for DC brightness control | VADJ | 0.3 | 2.5 | V | 4 | ||
| ADJ voltage to switch from on to off state | VADJoff | 0.15 | 0.2 | 0.25 | V | VADJ falling | 4 |
| ADJ voltage to switch from off to on state | VADJon | 0.2 | 0.25 | 0.3 | V | VADJ rising | 4 |
| Resistance between ADJ pin and VREF | RADJ | 135 | 250 | kΩ | 0 < VADJ < VREF | 4 | |
| Resistance between ADJ pin and VREF | RADJ | 13.5 | 25 | kΩ | VADJ > VREF +100mV | 4 | |
| Continuous LX switch current | ILXmean | 1 | A | 4 | |||
| LX switch On resistance | RLX | 0.5 | 1 | Ω | ILX=0.55A | 4 | |
| LX switch leakage current | ILX(leak) | 5 | µA | 4 | |||
| Duty cycle range of PWM on ADJ, low frequency | DPWM(LF) | 0.01 | 1 | PWM frequency <500Hz, PWM amplitude = VREF, measured on ADJ pin | 4 | ||
| Duty cycle range of PWM on ADJ, high frequency | DPWM(HF) | 0.16 | 1 | PWM frequency >10kHz, PWM amplitude = VREF, measured on ADJ pin | 4 | ||
| Soft start time | tSS | 500 | µs | Time for output current to reach 90% of final value after VADJ has risen above 0.3V | 4 | ||
| Operating frequency | fLX | 280 | kHz | ADJ pin floating, L = 33µH (0.093V), IOUT = 1A @ VLED = 3.6V, driving 1 LED | 4 | ||
| Minimum switch off-time | tOFFMIN | 200 | ns | 4 | |||
| Minimum switch on-time | tONMIN | 240 | ns | 4 | |||
| Internal comparator propagation delay | tPD | 50 | ns | 4 |
CAD (KiCad official)
- Symbol:
ZXLD1360ET5TA - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
zxld1360et5ta-etched.step/zxld1360et5ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zxld1360et5ta.step/zxld1360et5ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (25 pp, sha256
ddff885aa23a9b95, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).