component

ZXLD1360-MS

Public Made by Adom

by adom

MSKSEMI LED Drivers, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentled driverszxld1360-msfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 9d ago
viewers zxld1360-ms: viewers · Ray 9d ago
package.json Publish 0.1.0 · Ray 9d ago
page.json Set visibility: public · Ray 9d ago
README.md Publish 0.1.0 · Ray 9d ago
zxld1360-ms-etched.glb Publish 0.1.0 · Ray 9d ago
zxld1360-ms-etched.step zxld1360-ms: factory component page (tier=lcsc) · Ray 9d ago
zxld1360-ms-hero.glb zxld1360-ms: hero GLB from the etched model (keeps the MPN mark) · Ray 9d ago
zxld1360-ms-hero.overlay.json Publish 0.1.0 · Ray 9d ago
zxld1360-ms.glb Publish 0.1.0 · Ray 9d ago
zxld1360-ms.kicad_mod Publish 0.1.0 · Ray 9d ago
zxld1360-ms.kicad_sym Publish 0.1.0 · Ray 9d ago
zxld1360-ms.lbr Publish 0.1.0 · Ray 9d ago
zxld1360-ms.step Publish 0.1.0 · Ray 9d ago

ZXLD1360-MS

MSKSEMI · LED Drivers · SOT-23-5

ZXLD1360-MS from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW bidirectional Drain of the internal power MOS switch (SW pin), rated at a maximum SW current of 1.0 A and covered by the 35 V maximum pin voltage limit (RDS(on) 300 mΩ at VIN 6 V to 30 V).
2 GND power_in Chip ground reference for the device.
3 DIM input Brightness control input supporting PWM and analog dimming: DIM below 0.3 V turns the output off into standby, DIM high (VIH 2.0 V min) enables switching, and the pin is limited to 6 V maximum; leave floating if dimming is not used (about 5 V on the pin).
4 CS input Current-sense input for the high-side sense resistor; the sense threshold is VIN-VCS = 100 mV typical (95 to 105 mV), with a CS pin input current of 10 µA.
5 VIN power_in Supply input with an operating range of 5.5 V to 30 V, a 35 V maximum pin voltage limit, and a 5.1 V undervoltage lockout threshold; it needs a 22 to 47 µF filter capacitor rated above the maximum input voltage.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOT-23-5
Category LED Drivers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 5.5 30 V 5
CS pin voltage VCS 95 100 105 mV VIN-VCS 5
Maximum voltage, all IC pins except DIM VMAX1 35 V all IC pins except DIM 4
Maximum voltage, DIM pin VMAX2 6 V DIM pin 4
Maximum SW pin current IMAX 1 A SW pin 4
Maximum power dissipation PDMAX 0.5 W 4
Thermal resistance, junction to ambient PTR1 45 oC/W SOT23-5 package, θJA 4
Operating junction temperature range TJ -20 125 oC 4
Storage temperature range TSTG -55 150 oC 4
Soldering temperature TSD 230 240 oC soldering time less than 30 s 4
ESD HBM rating VHBM 2000 V HBM 4
Undervoltage lockout threshold VUVLO 5.1 V VIN=VCS, VDIM=VCC, VIN rising from 0V 5
Undervoltage lockout hysteresis VHYS 0.4 V 5
Standby current IST 320 uA 5
Maximum switching frequency FSW_MAX 1 MHz 5
CS detection voltage high level VCSH 120 mV (VIN-VCS) rising from 0.1V until DRV output low 5
CS detection voltage low level VCSL 80 mV (VIN-VCS) falling from 0.3V until DRV output high 5
CS pin input current ICS 10 uA 5
Maximum dimming frequency FDIM 16 KHz 5
DIM pin floating voltage VDIM 5 V DIM floating 5
DIM input high level VIH 2 V 5
DIM pull-up current IDIM 5 uA 5
MOS on-resistance RDSON 300 mΩ VIN=6V~30V 6
Overtemperature regulation threshold OTP_TH 150 oC 6

CAD (KiCad official)

  • Symbol: ZXLD1360-MS
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: zxld1360-ms-etched.step / zxld1360-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zxld1360-ms.step / zxld1360-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (11 pp, sha256 7adc6fee5461dedf, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF