Generated by kicad-footprint-generator · KiCad file format 20260206
ZXCT1087E5TA
Diodes Incorporated · Monitors & Reset Circuits · SOT-25
ZXCT1087E5TA from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Voltage output pin for the ZXCT1087, a fixed gain of 50 x VSENSE, with output range 0 to VS- - 1 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | S+ | input | Positive input of the current monitor with a wide common-mode input range of 2.7V to 40V for the ZXCT1087, to be connected directly to the input side (VSUPPLY) of the sense resistor. |
| 4 | S- | input | Negative input of the current monitor with a wide common-mode input range of 2.7V to 40V for the ZXCT1087, to be connected directly to the load side (VLOAD) of the sense resistor. |
| 5 | VCC | power_in | Analogue supply pin powering the internal circuitry, with a recommended range of 2.7V to 40V for the ZXCT1087 and an absolute maximum of -0.3 to 45 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on S- and S+ | -0.3 | 45 | V | ZXCT1083/1085/1087 | 2 | ||
| Voltage on VCC | -0.3 | 45 | V | ZXCT1083/1085/1087 | 2 | ||
| Differential Input Voltage | VS+ - VS- | -800 | 800 | mV | 2 | ||
| Input current into S+ or S- | -12 | 12 | mA | 2 | |||
| Storage Temperature | -55 | 150 | °C | 2 | |||
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Package Power Dissipation | 300 | mW | TA = 25°C, de-rate to zero at 150°C | 2 | |||
| ESD Rating Human Body Model | 2 | kV | HBM | 2 | |||
| ESD Rating Machine Model | 200 | V | MM | 2 | |||
| Common-Mode Input Range | VIN | 2.7 | 40 | V | ZXCT1083/1085/1087 | 2 | |
| Supply Voltage Range | VCC | 2.7 | 40 | V | ZXCT1083/1085/1087 | 2 | |
| Differential Sense Input Voltage Range | VSENSE | 0 | 0.5 | V | 2 | ||
| Ambient Temperature Range | TA | -40 | 125 | °C | 2 | ||
| S+ input current | IS+ | 1.7 | µA | VSENSE = 0mV | 3 | ||
| S+ input current | IS+ | 5 | µA | VSENSE = 0mV, TA = FT | 3 | ||
| S- input current | IS- | 1.7 | µA | VSENSE = 0mV | 3 | ||
| S- input current | IS- | 5 | µA | VSENSE = 0mV, TA = FT | 3 | ||
| Input Offset Voltage | VIO | -1 | 0.2 | 1 | mV | VSENSE = 0mV | 3 |
| Input Offset Voltage | VIO | -3 | 3 | mV | ZXCT1086/87, TA = FT | 3 | |
| Input offset temperature co-efficient | 4 | µV/K | printed ±4 | 3 | |||
| Gain | GV | 50 | V/V | ZXCT1086/7, VSENSE = 10mV to 150mV | 3 | ||
| Gain error | GV-ERR | -1 | 1 | % | 3 | ||
| Gain error | GV-ERR | -2 | 2 | % | TA = FT | 3 | |
| Voltage gain temperature co-efficient | GV-TC | 100 | ppm/K | TA = FT | 3 | ||
| Output impedance | ZOUT | 125 | kΩ | ZXCT1084/5/6/7 | 3 | ||
| -3dB Small Signal Bandwidth | BW | 200 | kHz | VSENSE (AC) = 10mVPP, G = 50 | 4 | ||
| Settling time (0.1%) | ts(0.1%) | 7 | µs | VSENSE = 50mV to 200mV step, G = 50 | 4 | ||
| Output noise voltage density | vN-OUT | 2.9 | µV/√Hz | f = 1kHz, ZXCT1086/7 | 4 | ||
| Output noise voltage density | vN-OUT | 2.3 | µV/√Hz | f = 10kHz, ZXCT1086/7 | 4 | ||
| Total output noise voltage | vN-OUT | 730 | µVRMS | f = 0.1Hz to 100kHz, ZXCT1086/7 | 4 | ||
| VCC Supply current | ICC | 0.6 | µA | VSENSE = 0V | 4 | ||
| VCC Supply current | ICC | 2 | µA | VSENSE = 0V, TA = FT | 4 | ||
| VCC Supply rejection ratio | PSRR | 80 | 100 | dB | ZXCT1087: VSENSE = 30mV; VCC = 2.7V to 40V | 4 | |
| VCC Supply rejection ratio | PSRR | 75 | dB | ZXCT1087: VSENSE = 30mV; VCC = 2.7V to 40V, TA = FT | 4 | ||
| Common-mode sense rejection ratio | CMRR | 80 | 100 | dB | ZXCT1087: VSENSE = 30mV; VS+ = 2.7V to 40V | 4 | |
| Common-mode sense rejection ratio | CMRR | 80 | dB | ZXCT1087: VSENSE = 30mV; VS+ = 2.7V to 40V, TA = FT | 4 |
CAD (KiCad official)
- Symbol:
ZXCT1087E5TA - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
zxct1087e5ta-etched.step/zxct1087e5ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zxct1087e5ta.step/zxct1087e5ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
8f530f6ea2fd9f55, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).