component
ZTP7193YH
Public Made by Adomby adom
ZILLTEK DC-DC Converters, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
| ztp7193yh-etched.glb | 16d ago |
| ztp7193yh-etched.step | 16d ago |
| ztp7193yh-hero.glb | 16d ago |
| ztp7193yh-hero.overlay.json | 16d ago |
| ztp7193yh.glb | 16d ago |
| ztp7193yh.kicad_mod | 16d ago |
| ztp7193yh.kicad_sym | 16d ago |
| ztp7193yh.lbr | 16d ago |
| ztp7193yh.step | 16d ago |
ZTP7193YH
ZILLTEK · DC-DC Converters · TSOT-23-6L
ZTP7193YH from ZILLTEK, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | High-side gate drive boost input; a 0.1µF or greater capacitor from SW to BOOT powers the high-side switch, with BOOT limited to VSW-0.3V to VSW+6V. |
| 2 | GND | power_in | Ground reference for the controller and power stage; connect GND to a large copper area to cool the chip. |
| 3 | FB | input | Feedback input that senses the output through a resistive divider and regulates to a 0.6V threshold (feedback over-voltage threshold 0.72V); keep feedback connections short and direct. |
| 4 | EN | input | Enable input that turns the regulator on when driven high (rising threshold 1.22V typ) and off when driven low (falling threshold 1.12V typ); pull up with a 100kΩ resistor for automatic startup. |
| 5 | IN | power_in | Power input supplying the IC and the step-down converter switches, specified for 4.5V to 18V with absolute maximum of -0.3V to +19V; bypass to GND with a suitably large capacitor. |
| 6 | SW | power_out | Power switching output node that feeds the output LC filter; absolute maximum is VIN+0.3V, and a capacitor is required from SW to BOOT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZILLTEK |
| Package | TSOT-23-6L |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 4.5 | 18 | V | 4 | ||
| Output Voltage | VOUT | 0.6 | 14 | V | 4 | ||
| Shutdown Supply Current | 3 | 6 | µA | VEN = 0V | 4 | ||
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | 4.5V ≤ VIN ≤ 18V | 4 |
| Upper Switch Current Limit | 3.7 | 4.3 | A | Minimum Duty Cycle | 4 | ||
| Oscillation Frequency | FOSC1 | 0.8 | 1 | 1.2 | MHz | 4 | |
| Short Circuit Oscillation Frequency | FOSC2 | 400 | 500 | 600 | KHz | VFB = 0V | 4 |
| Supply Voltage (absolute maximum) | VIN | -0.3 | 19 | V | 2 | ||
| Enable Voltage | VEN | -0.3 | 19 | V | 2 | ||
| All Other Pins | -0.3 | 6 | V | 2 | |||
| Power Dissipation | 1.2 | W | @25℃ | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature | 260 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| ESD, HBM | 2 | KV | 2 | ||||
| ESD, MM | 200 | V | 2 | ||||
| Supply Voltage (recommended) | VIN | 4.5 | 18 | V | 2 | ||
| Output Voltage (recommended) | VOUT | 0.6 | V | upper limit printed as VIN-4V | 2 | ||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Supply Current | 0.7 | mA | VEN = 2.0V, VFB = 0.66V | 4 | |||
| High-Side Switch Leakage Current | 10 | µA | VEN = 0V, VSW = 0V, TA = +125°C | 4 | |||
| Feedback Over-voltage Threshold | 0.72 | V | 4 | ||||
| Error Amplifier Voltage Gain | AEA | 1000 | V/V | 4 | |||
| High-Side Switch On-Resistance | RDS(ON)1 | 85 | mΩ | 4 | |||
| Low-Side Switch On-Resistance | RDS(ON)2 | 45 | mΩ | 4 | |||
| Lower Switch Current Limit | 0 | A | From Drain to Source | 4 | |||
| Maximum Duty Cycle | DMAX | 83 | % | VFB = 0.5V | 4 | ||
| Minimum On Time | 80 | ns | 4 | ||||
| EN Falling Threshold Voltage | VEN Falling | 1.12 | V | 4 | |||
| EN Rising Threshold Voltage | VEN Rising | 1.22 | V | 4 | |||
| Input Under Voltage Lockout Threshold | VIN Rising | 3.5 | V | 4 | |||
| Input Under Voltage Lockout Threshold Hysteresis | 200 | mV | 4 | ||||
| Soft-Start Period | 1 | ms | 4 | ||||
| Thermal Shutdown | 150 | °C | 4 | ||||
| Thermal Resistance, junction-to-ambient | θJA | 100 | °C/W | 2 | |||
| Thermal Resistance, junction-to-case | θJC | 55 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
ZTP7193YH - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
ztp7193yh-etched.step/ztp7193yh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ztp7193yh.step/ztp7193yh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZILLTEK datasheet (9 pp, sha256
aba5f527cd511808, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).