3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownZLDO1117QG50TA
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4
ZLDO1117QG50TA from Diodes Incorporated, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | A resistor divider from this pin to the VOUT pin and ground sets the output voltage, and the pin is ground only in fixed-mode. |
| 2 | VOUT | power_out | The regulator output requires a minimum of 4.7µF capacitor with 0.05Ω ≤ ESR ≤ 0.5Ω connected to ground for stability. |
| 3 | VIN | power_in | The input must be at least 1.3V higher than VOUT for proper regulation and is rated up to 18V, with 2.7V as the minimum recommended input voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223-4 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | 18 | V | 3 | ||
| Output Current | IO | 0.01 | 1 | A | 3 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 105 | °C | 3 | ||
| Input Supply Voltage (Relative to Ground) | VIN | -0.03 | 18 | V | Relative to ADJ/GND pin | 2 | |
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TST | -65 | 150 | °C | 2 | ||
| ESD Susceptibility HBM | HBM | 4000 | V | Human Body Model | 2 | ||
| ESD Susceptibility MM | MM | 400 | V | Machine Model | 2 | ||
| ESD Susceptibility CDM | CDM | 1000 | V | Charged Device Model | 2 | ||
| Output Voltage ZLDO1117Q-50 | 4.95 | 5 | 5.05 | V | IO = 10mA, VIN = 7V, TJ = +25°C | 4 | |
| Output Voltage ZLDO1117Q-50 | 4.9 | 5.1 | V | 0 < IO < 1A, 6.4V < VIN < 12V, TJ = -40°C to +125°C (FT) | 4 | ||
| Line Regulation ZLDO1117Q-xx | 0.1 | % | IO = 0mA, VOUT + 1.5V < VIN < 12V, TJ = +25°C | 4 | |||
| Line Regulation ZLDO1117Q-xx | 0.2 | % | IO = 0mA, VOUT + 1.5V < VIN < 12V, TJ = -40°C to +125°C (FT) | 4 | |||
| Load Regulation ZLDO1117Q-50 | 10 | mV | VIN = 6.5V, 0 < IO < 1A, TJ = +25°C | 4 | |||
| Load Regulation ZLDO1117Q-50 | 20 | mV | VIN = 6.5V, 0 < IO < 1A, TJ = -40°C to +125°C (FT) | 4 | |||
| Current Limit ZLDO1117Q-50 | 1.1 | A | (VIN - VOUT) = 5V, TJ = -40°C to +125°C (FT) | 4 | |||
| Dropout Voltage (VIN - VOUT) ZLDO1117Q-50 | (VIN - VOUT) | 1.11 | 1.2 | V | IO = 1A, ΔVOUT = 1%VOUT, TJ = +25°C | 4 | |
| Quiescent Current ZLDO1117Q-xx | 4 | 10 | mA | VIN < 18V, IO = 0mA, TJ = -40°C to +125°C (FT) | 4 | ||
| Ripple Rejection ZLDO1117Q-xx | 60 | 80 | dB | VIN = VOUT + 3V, f = 120Hz, COUT = 25µF Tantalum, IOUT = 100mA, TJ = +25°C | 4 | ||
| Thermal Regulation | 0.1 | %/W | 30ms pulse, TJ = +25°C | 4 | |||
| Junction-to-Ambient Thermal Resistance SOT223 | θJA | 107 | °C/W | TA = +27°C, no air flow, 2" x 2" polyimide PCB, 2oz copper, 5.6mm x 5.6mm pad (Note 9) | 3 | ||
| Junction-to-Case Thermal Resistance SOT223 | θJC | 16 | °C/W | Note 9 test condition | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish: Matte Tin Plated Leads, Solderable per M2003 JESD22-B102 • Weight: | 13 |
CAD (KiCad official)
- Symbol:
ZLDO1117QG50TA - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
zldo1117qg50ta-etched.step/zldo1117qg50ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zldo1117qg50ta.step/zldo1117qg50ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (14 pp, sha256
52a05840bdb17cd6, retrieved 2026-11-13, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).