Generated by kicad-footprint-generator · KiCad file format 20260206
ZL40234LDG1
Microchip Tech · Clock Buffers, Drivers · QFN-32(5x5)
ZL40234LDG1 from Microchip Tech, in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect to the ground. |
| 2 | VDDO_A | power_in | Positive supply for differential output bank A (OUT0 and OUT1); connect 3.3V or 2.5V, which need not equal VDD or VDDO_B. |
| 3 | OUT0_p | output | Non-inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 0, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 4 | OUT0_n | output | Inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 0, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 5 | VDDO_A | power_in | Positive supply for differential output bank A (OUT0 and OUT1); connect 3.3V or 2.5V, which need not equal VDD or VDDO_B. |
| 6 | OUT1_p | output | Non-inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 1, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 7 | OUT1_n | output | Inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 1, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 8 | GND | power_in | Ground; connect to the ground. |
| 9 | OUT_TYPE_SEL0 | input | Output type select bit 0; with OUT_TYPE_SEL1 selects 00 LVPECL, 01 LVDS, 10 HCSL, 11 High-Z (disabled) for the differential outputs. |
| 10 | VDD | power_in | Positive supply voltage; connect to 3.3V or 2.5V. |
| 11 | XIN | input | Crystal oscillator input or crystal bypass/overdrive mode input; pull down or connect to ground if the crystal oscillator is not used. |
| 12 | XOUT | output | Crystal oscillator output. |
| 13 | IN_SEL0 | input | Input select bit 0 (internal pull-down); with IN_SEL1 selects IN0 (00), IN1 (01) or crystal oscillator (1X). |
| 14 | IN0_p | input | Non-inverting differential or single-ended reference input 0, 0Hz to 1.6GHz, with internal 30k pull-down. |
| 15 | IN0_n | input | Inverting reference input 0, 0Hz to 1.6GHz, biased to VDD/2 by 60k pull-up/pull-down resistors (30k equivalent) when floating. |
| 16 | IN_SEL1 | input | Input select bit 1 (internal pull-down); high selects the crystal oscillator, low selects IN0 or IN1 per IN_SEL0. |
| 17 | GND | power_in | Ground; connect to the ground. |
| 18 | OUT3_n | output | Inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 3, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 19 | OUT3_p | output | Non-inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 3, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 20 | VDDO_B | power_in | Positive supply for differential output bank B (OUT2 and OUT3); connect 3.3V or 2.5V, which need not equal VDD or VDDO_A. |
| 21 | OUT2_n | output | Inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 2, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 22 | OUT2_p | output | Non-inverting ultra-low additive jitter differential LVPECL/HCSL/LVDS output 2, 0 to 1.6GHz, type set by OUT_TYPE_SEL0/1. |
| 23 | VDDO_B | power_in | Positive supply for differential output bank B (OUT2 and OUT3); connect 3.3V or 2.5V, which need not equal VDD or VDDO_A. |
| 24 | GND | power_in | Ground; connect to the ground. |
| 25 | NC1 | unconnected | No connect, not connected to the die; leave unconnected or connect to GND for mechanical support. |
| 26 | IN1_n | input | Inverting reference input 1, 0Hz to 1.6GHz, biased to VDD/2 by 60k pull-up/pull-down resistors (30k equivalent) when floating. |
| 27 | IN1_p | input | Non-inverting differential or single-ended reference input 1, 0Hz to 1.6GHz, with internal 30k pull-down. |
| 28 | VDD | power_in | Positive supply voltage; connect to 3.3V or 2.5V. |
| 29 | OUT_LVCMOS | output | Ultra-low additive jitter LVCMOS output, 0 to 250MHz output frequency range. |
| 30 | VDD_LVCMOS | power_in | Positive supply for the LVCMOS output; connect to 3.3V, 2.5V, 1.8V or 1.5V. |
| 31 | LVCMOS_OE | input | LVCMOS output enable: high enables the LVCMOS output, low sets it to High-Z. |
| 32 | OUT_TYPE_SEL1 | input | Output type select bit 1; with OUT_TYPE_SEL0 selects 00 LVPECL, 01 LVDS, 10 HCSL, 11 High-Z (disabled) for the differential outputs. |
| 33 | E-Pad GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (3.3V) absolute maximum | VDD/VDDO | -0.5 | 4.6 | V | 19 | ||
| Supply voltage (2.5V) absolute maximum | VDD/VDDO | -0.5 | 3.5 | V | 19 | ||
| Storage temperature | TST | -55 | 125 | °C | 19 | ||
| Supply voltage 3.3V | VDD/VDDO/VDD_LVCMOS | 3.135 | 3.3 | 3.465 | V | 19 | |
| Supply voltage 2.5V | VDD/VDDO/VDD_LVCMOS | 2.375 | 2.5 | 2.625 | V | 19 | |
| Supply voltage 1.8V | VDD_LVCMOS | 1.6 | 1.8 | 2 | V | 19 | |
| Supply voltage 1.5V | VDD_LVCMOS | 1.35 | 1.5 | 1.65 | V | 19 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 19 | |
| Input voltage | VDD-IN | -0.3 | V | max VDD + 0.3 V | 19 | ||
| Core device current 3.3V | Is_3.3V | 163 | 197 | mA | VDD= 3.3V+5%, all outputs and XTAL disabled | 19 | |
| Core device current 2.5V | Is_2.5V | 153 | 187 | mA | VDD = 2.5V+5%, all outputs and XTAL disabled | 19 | |
| Core current with XTAL 3.3V | IDD_XTAL_3.3V | 128 | 154 | mA | VDD= 3.3V+5% | 19 | |
| Core current with XTAL 2.5V | IDD_XTAL_2.5V | 124 | 150 | mA | VDD= 2.5V+5% | 19 | |
| Common output current 3.3V | IDD_CM_3.3V | 13.44 | 15.05 | mA | VDDO= 3.3V+5% | 19 | |
| Common output current 2.5V | IDD_CM_2.5V | 12.18 | 13.65 | mA | VDDO= 2.5V+5% | 19 | |
| Current per LVPECL output 3.3V | IDD_LVPECL_3.3V | 19.36 | 23.26 | mA | VDDO= 3.3V+5% | 19 | |
| Current per LVPECL output 2.5V | IDD_LVPECL_2.5V | 19.38 | 22.17 | mA | VDDO= 2.5V+5% | 19 | |
| Current per LVDS output 3.3V | IDD_LVDSL_3.3V | 6.73 | 8 | mA | VDDO= 3.3V+5% | 19 | |
| Current per HCSL output 3.3V | IDD_HCSL_3.3V | 16.43 | 19.87 | mA | VDDO= 3.3V+5% | 19 | |
| CMOS input leakage current | IIL | -25 | 50 | µA | VI = VDD or 0 V | 20 | |
| Differential input common mode voltage | VCM | 1 | 2 | V | 20 | ||
| Differential input voltage f ≤ 1GHz | VID | 0.15 | 1.3 | V | f ≤ 1GHz | 20 | |
| Differential input voltage 1GHz < f ≤ 1.6GHz | VID | 0.35 | 1.3 | V | 1GHz < f ≤ 1.6GHz | 20 | |
| Differential input leakage current | IIL | -150 | 150 | µA | VI = 2V or 0V | 20 | |
| Single ended input voltage | VSI | -0.3 | 2.7 | V | VDD = 3.3V or 2.5V | 20 | |
| Input frequency (differential) | fIN | 0 | 1600 | MHz | 20 | ||
| Crystal frequency | f | 8 | 60 | MHz | 21 | ||
| LVPECL output high voltage 3.3V | VLVPECL_OH | 1.9 | 2.08 | 2.4 | V | DC Measurement | 24 |
| LVPECL output low voltage 3.3V | VLVPECL_OL | 1.2 | 1.36 | 1.7 | V | DC Measurement | 24 |
| LVPECL output differential swing 3.3V | VLVPECL_SW | 0.6 | 0.72 | 0.9 | V | DC Measurement | 24 |
| LVPECL output to output skew 3.3V | tOOSK | 40 | ps | 24 | |||
| LVPECL input to output delay 3.3V | tIOD | 0.73 | 0.87 | 1.1 | ns | 24 | |
| LVPECL input to output delay 2.5V | tIOD | 0.75 | 0.87 | 1.1 | ns | 25 | |
| LVDS output differential swing 3.3V | VLVDS_SW | 0.25 | 0.32 | 0.39 | V | DC Measurement | 26 |
| LVDS output to output skew | tOOSK | 20 | ps | 26 | |||
| LVDS short circuit current single ended | IS | -24 | 24 | mA | Single ended outputs shorted to GND | 26 | |
| HCSL output differential swing 3.3V | VHCSL_SW | 0.6 | 0.85 | 1.1 | V | DC Measurement | 28 |
| HCSL absolute crossing voltage 3.3V | VCROSS | 0.32 | 0.384 | 0.447 | V | 28 | |
| HCSL PCIe 3.0 additive jitter 3.3V | TjPCIe_3.0 | 20 | 40 | fs | Input clock: 100MHz | 28 | |
| LVCMOS output impedance 3.3V | RO | 15 | Ω | DC Measurement | 22 | ||
| LVCMOS output frequency | FO | 0 | 250 | MHz | 22 | ||
| Maximum ambient temperature | TA | 85 | C | 32 | |||
| Maximum junction temperature | TJMAX | 125 | C | 32 | |||
| Junction to ambient thermal resistance | θJA | 23.5 | C/W | still air | 32 | ||
| Junction to ambient thermal resistance | θJA | 18.9 | C/W | 1m/s airflow | 32 | ||
| Junction to ambient thermal resistance | θJA | 17.1 | C/W | 2.5m/s airflow | 32 | ||
| Junction to board thermal resistance | θJB | 7.9 | C/W | 32 | |||
| Junction to case thermal resistance | θJC | 16.5 | C/W | 32 | |||
| Junction to pad thermal resistance | θJP | 3.9 | C/W | Still air | 32 |
CAD (KiCad official)
- Symbol:
ZL40234LDG1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
zl40234ldg1-etched.step/zl40234ldg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zl40234ldg1.step/zl40234ldg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (35 pp, sha256
b1f3a1382f7c522e, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).