Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZL40219LDG1

Microchip Tech · Clock Buffers, Drivers · QFN-32-EP(5x5)

ZL40219LDG1 from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 vdd_core power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
2 gnd power_in Ground, 0 V.
3 clk_p input Differential clock input (analog) accepting differential or single-ended input signals; single-ended use is described in the Clock Inputs section.
4 vt passive On-chip input termination node (analog), the center tap between the internal 50 Ohm termination resistors; use depends on input signal type as described in the Clock Inputs section.
5 ctrl input Digital control for on-chip input termination: 0 selects DC-coupled LVPECL or LVDS modes, 1 selects AC-coupled differential modes; the pin is internally pulled down to GND.
6 clk_n input Differential clock input (analog) accepting differential or single-ended input signals; single-ended use is described in the Clock Inputs section.
7 gnd power_in Ground, 0 V.
8 vdd_core power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
9 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
10 NC unconnected No connection; leave unconnected.
11 out7_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
12 out7_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
13 out6_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
14 out6_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
15 out5_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
16 out5_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
17 out4_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
18 out4_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
19 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
20 gnd power_in Ground, 0 V.
21 gnd power_in Ground, 0 V.
22 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
23 out3_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
24 out3_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
25 out2_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
26 out2_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
27 out1_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
28 out1_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
29 out0_n output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
30 out0_p output Differential LVDS output (analog), one of eight outputs, operating up to 750 MHz.
31 NC unconnected No connection; leave unconnected.
32 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.375 to 2.625 V in 2.5 V mode; 3.135 to 3.465 V in 3.3 V mode).
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-32-EP(5x5)
Category Clock and Timing
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD_R -0.5 4.6 V 16
Voltage on any digital pin VPIN -0.5 V max printed as VDD 16
Soldering temperature T 260 °C 16
Storage temperature TST -55 125 °C 16
Junction temperature Tj 125 °C 16
Input capacitance each pin Cp 500 fF 16
Supply voltage 2.5 V mode VDD25 2.375 2.5 2.625 V 16
Supply voltage 3.3 V mode VDD33 3.135 3.3 3.465 V 16
Operating temperature TA -40 25 85 °C 16
Supply current LVDS drivers loaded Idd_load 112 mA all outputs active 16
CMOS control logic input leakage current IIL 1 µA VI = VDD or 0 V 16
Differential common mode voltage (2.5 V) VICM 1.1 1.6 V for 2.5 V 16
Differential common mode voltage (3.3 V) VICM 1.1 2 V for 3.3 V 16
Differential input voltage difference VID 0.25 1 V 16
Differential input resistance VIR 80 100 120 ohm 16
LVDS output differential voltage VOD 0.25 0.3 0.4 V measured between 125 and 750 MHz 16
LVDS common mode voltage VCM 1.1 1.25 1.375 V 17
Maximum operating frequency 1/tp 750 MHz 17
Input to output clock propagation delay tpd 0 1 2 ns 17
Output to output skew tout2out 80 150 ps 17
Part to part output skew tpart2part 120 300 ps 17
Output clock duty cycle degradation tPWH/ tPWL -5 0 5 Percent 17
LVDS output slew rate rSL 0.55 V/ns 17
Junction to ambient thermal resistance ΘJA 37.4 oC/W still air 20
Junction to ambient thermal resistance ΘJA 33.1 oC/W 1 m/s airflow 20
Junction to ambient thermal resistance ΘJA 31.5 oC/W 2 m/s airflow 20
Junction to case thermal resistance ΘJC 24.4 oC/W 20
Junction to board thermal resistance ΘJB 19.5 oC/W 20
Maximum junction temperature Tjmax 125 oC 20
Maximum ambient temperature TA 85 oC 20

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin ZL40219LDF1 32 Pin QFN Tape and Reel Matte Tin 1

CAD (KiCad official)

  • Symbol: ZL40219LDG1
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: zl40219ldg1-etched.step / zl40219ldg1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zl40219ldg1.step / zl40219ldg1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 4fb0741dc2770e4d, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF