main
History Download
Ray Publish 0.1.0 968f175

ZL40212LDG1

Microchip Tech · Clock Buffers, Drivers · QFN-16-EP(3x3)

ZL40212LDG1 from Microchip Tech, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 clk_p input Differential (or single-ended) clock input; the datasheet refers to the Clock Inputs section for all supported input signal configurations.
2 NC unconnected No connection; leave unconnected.
3 NC unconnected No connection; leave unconnected.
4 clk_n input Differential (or single-ended) clock input; the datasheet refers to the Clock Inputs section for all supported input signal configurations.
5 gnd power_in Ground, 0 V.
6 NC unconnected No connection; leave unconnected.
7 NC unconnected No connection; leave unconnected.
8 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.5 V ±5% or 3.3 V ±5% per the operating conditions).
9 out1_n output LVDS differential output (complement of out1_p); the datasheet describes the outputs as precision LVDS drivers.
10 out1_p output LVDS differential output (true of out1 pair); the datasheet describes the outputs as precision LVDS drivers.
11 out0_n output LVDS differential output (complement of out0_p); the datasheet describes the outputs as precision LVDS drivers.
12 out0_p output LVDS differential output (true of out0 pair); the datasheet describes the outputs as precision LVDS drivers.
13 vdd power_in Positive supply voltage, 2.5 VDC or 3.3 VDC nominal (2.5 V ±5% or 3.3 V ±5% per the operating conditions).
14 NC unconnected No connection; leave unconnected.
15 NC unconnected No connection; leave unconnected.
16 gnd power_in Ground, 0 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-16-EP(3x3)
Category Clock and Timing
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VDD_R -0.5 4.6 V 15
Voltage on any digital pin (absolute maximum) VPIN -0.5 V Maximum printed as VDD 15
Storage temperature TST -55 125 °C 15
Soldering temperature T 260 °C 15
Junction temperature Tj 125 °C 15
Input capacitance each pin Cp 500 fF 15
Supply voltage 2.5 V mode VDD25 2.375 2.5 2.625 V 15
Supply voltage 3.3 V mode VDD33 3.135 3.3 3.465 V 15
Operating temperature TA -40 25 85 °C 15
LVDS differential input common mode supply voltage, 2.5 V supply VICM 1.1 1.6 V for 2.5 V 15
LVDS differential input common mode supply voltage, 3.3 V supply VICM 1.1 2 V for 3.3 V 15
LVDS differential input voltage VID 0.25 1 V 15
LVDS output differential voltage VOD 0.25 0.3 0.4 V VOD parameter measured from 125 to 750 MHz 15
LVDS output common mode voltage VCM 1.1 1.25 1.375 V 15
Supply current, LVDS drivers loaded Idd_load 44 mA LVDS drivers - loaded (all outputs are active) 15
Maximum operating frequency 1/tp 750 MHz 16
Input to output clock propagation delay tpd 0 1 2 ns 16
Output to output skew tout2out 50 100 ps 16
Part to part output skew tpart2part 80 300 ps 16
Output clock duty cycle degradation tPWH/ tPWL -5 0 5 Percent 16
LVDS output clock slew rate rsl 0.55 V/ns 16
Junction to ambient thermal resistance, still air ΘJA 67.9 °C/W Still air 19
Junction to ambient thermal resistance, 1 m/s ΘJA 61.6 °C/W 1 m/s airflow 19
Junction to ambient thermal resistance, 2 m/s ΘJA 58.1 °C/W 2 m/s airflow 19
Junction to case thermal resistance ΘJC 44.1 °C/W Still air 19
Junction to board thermal resistance ΘJB 23.2 °C/W Still air 19
Maximum junction temperature Tjmax 125 °C 19
Maximum ambient temperature TA 85 °C 19

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin ZL40212LDF1 16 Pin QFN Tape and Reel Matte Tin 1

CAD (KiCad official)

  • Symbol: ZL40212LDG1
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: zl40212ldg1-etched.step / zl40212ldg1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zl40212ldg1.step / zl40212ldg1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (21 pp, sha256 3b148187d55f02c3, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF