Generated by kicad-footprint-generator · KiCad file format 20260206
ZGR1040AG1
Zynalog · Voltage Reference · SOT-23-3
ZGR1040AG1 from Zynalog, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet limits Vin to -0.3 V to 6 V absolute maximum and Vout + Vdrop to 5.5 V recommended. |
| 2 | VOUT | power_out | Reference voltage output; the datasheet limits it to -0.3 V to 5.5 V absolute maximum with a 22 mA short-circuit current and ±10 mA recommended load current. |
| 3 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Zynalog |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | Vin | -0.3 | 6 | V | 4 | ||
| Enable pin voltage | VEN | -0.3 | V | 4 | |||
| Output voltage | Vout | -0.3 | 5.5 | V | 4 | ||
| Operating temperature | TA | -55 | 160 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 170 | °C | 4 | ||
| Input voltage | Vin | 5.5 | V | 4 | |||
| Enable voltage | VEN | 0 | V | 4 | |||
| Output current | Iload | -10 | 10 | mA | 4 | ||
| Operating temperature | TA | -40 | 125 | °C | 4 | ||
| Initial output accuracy | Vout | -0.2 | 0.2 | % | TA = 25°C | 5 | |
| Output voltage temperature drift | Vout | 30 | ppm/°C | −40°C ≤ TA ≤ 125°C | 5 | ||
| Line regulation | ΔVout/ΔVin | 4 | 20 | ppm/V | Vout + Vdrop ≤ Vin ≤ 5.5V | 5 | |
| Load regulation (positive load) | ΔVout/ΔIload | 7.5 | 20 | ppm/mA | Iload = 0 to 10mA; Vin = Vout + Vdrop | 5 | |
| Load regulation (negative load) | ΔVout/ΔIload | 2 | 10 | ppm/mA | Iload = −10mA to 0; Vin = Vout + Vdrop | 5 | |
| Capacitive load | Cload | 0.1 | 100 | µF | 5 | ||
| Quiescent current (operating mode) | Iq | 330 | 350 | µA | 工作模式 | 5 | |
| Quiescent current (shutdown output mode) | Iq | 1.5 | 5 | µA | 关断输出模式 | 5 | |
| Enable voltage (high, operating mode) | VEN | 2 | V | 工作模式 (EN=1) | 5 | ||
| Enable voltage (low, shutdown output mode) | VEN | 0.3 | V | 关断输出模式 (EN=0) | 5 | ||
| Dropout voltage | Vdrop | 8 | 50 | mV | Iload = 0mA | 5 | |
| Dropout voltage | Vdrop | 310 | 500 | mV | Iload = 10mA | 5 | |
| Output short-circuit current | Isc | 22 | 25 | mA | VOUT 接地 | 5 | |
| Enable startup time | ton | 2.5 | mS | 0.1% settling, Cload = 10μF | 5 | ||
| Enable startup time | ton | 240 | µS | 0.1% settling, Cload = 1μF | 5 | ||
| Power-up startup time | ton | 250 | µS | 0.1% settling, Cload = 1μF; Vin = 3V | 5 | ||
| Power-up startup time | ton | 200 | µS | 0.1% settling, Cload = 1μF; Vin = 5V | 5 | ||
| Low-frequency noise | en(p−p) | 15 | μVpp/V | f = 0.1Hz to 10Hz | 5 | ||
| Broadband noise | en | 45 | μVrms | f = 10Hz to 10KHz | 5 | ||
| Junction-to-ambient thermal resistance | RΘJA | 185 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RΘJC(top) | 156 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RΘJB | 29.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 33.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 29.1 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
ZGR1040AG1 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
zgr1040ag1-etched.step/zgr1040ag1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zgr1040ag1.step/zgr1040ag1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Zynalog datasheet (13 pp, sha256
0a00b15e0877f76d, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).