main
Ray
Publish 0.1.0
d1929a7
ZGAD125S14
Zynalog · Analog To Digital Converters (ADC) · QFN-40(6x6)
ZGAD125S14 from Zynalog, in a QFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | 1.8V analog supply; bypass to ground with a 0.1µF ceramic capacitor, and pins 1 and 2 may share one bypass capacitor. |
| 2 | VDD | power_in | 1.8V analog supply; bypass to ground with a 0.1µF ceramic capacitor, and pin 2 may share the bypass capacitor of pin 1. |
| 3 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 4 | Vin+ | power_in | Positive differential analog input, driven 180° out of phase with Vin- around the VCM common-mode voltage, with the differential input kept within 1.5V. |
| 5 | Vin- | power_in | Negative differential analog input, driven 180° out of phase with Vin+ around the VCM common-mode voltage, with the differential input kept within 1.5V. |
| 6 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 7 | SENSE | input | External reference input: connect to VDD to select the internal reference (±0.75V input range), or drive with an external reference between 1.2V and 1.3V for a ±0.6×VSENSE input range. |
| 8 | VREF | power_in | Reference voltage output, nominally 1.25V; bypass to ground with a 2.2µF ceramic capacitor. |
| 9 | VCM | output | Common-mode bias output, nominally 0.435×VDD, used to set the common-mode bias of the analog inputs; bypass to ground with a 0.1µF ceramic capacitor. |
| 10 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 11 | CLK+ | input | Sampling clock input; conversion starts on the rising edge of the clock (differential with CLK-). |
| 12 | CLK- | input | Sampling clock input; conversion starts on the falling edge of the clock (differential with CLK+). |
| 13 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 14 | OF- | output | Complement of the overflow/underflow digital output; OF+ is high when an overflow or underflow occurs. |
| 15 | OF+ | output | Overflow/underflow digital output; OF+ goes high when an overflow or underflow occurs. |
| 16 | D0_1- | output | Complement of DDR LVDS data output: carries bit D0 while CLKOUT+ is low and bit D1 while CLKOUT+ is high. |
| 17 | D0_1+ | output | DDR LVDS data output: carries bit D0 while CLKOUT+ is low and bit D1 while CLKOUT+ is high; each LVDS pair needs an external 100Ω differential termination. |
| 18 | D2_3- | output | Complement of DDR LVDS data output: carries bit D2 while CLKOUT+ is low and bit D3 while CLKOUT+ is high. |
| 19 | D2_3+ | output | DDR LVDS data output: carries bit D2 while CLKOUT+ is low and bit D3 while CLKOUT+ is high; each LVDS pair needs an external 100Ω differential termination. |
| 20 | DVDD | power_in | 1.8V supply for the digital output drivers; bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 21 | DGND | power_in | Ground for the digital output drivers. |
| 22 | D4_5- | output | Complement of DDR LVDS data output: carries bit D4 while CLKOUT+ is low and bit D5 while CLKOUT+ is high. |
| 23 | D4_5+ | output | DDR LVDS data output: carries bit D4 while CLKOUT+ is low and bit D5 while CLKOUT+ is high. |
| 24 | D6_7- | output | Complement of DDR LVDS data output: carries bit D6 while CLKOUT+ is low and bit D7 while CLKOUT+ is high. |
| 25 | D6_7+ | output | DDR LVDS data output: carries bit D6 while CLKOUT+ is low and bit D7 while CLKOUT+ is high. |
| 26 | CLKOUT- | output | Complement of the LVDS data output clock; data normally transitions on the rising and falling edges of CLKOUT+, and the CLKOUT phase can be delayed relative to the data via the mode register. |
| 27 | CLKOUT+ | output | LVDS data output clock; data normally transitions on the rising and falling edges of CLKOUT+, and its phase can be delayed relative to the data via the mode register. |
| 28 | D8_9- | output | Complement of DDR LVDS data output: carries bit D8 while CLKOUT+ is low and bit D9 while CLKOUT+ is high. |
| 29 | D8_9+ | output | DDR LVDS data output: carries bit D8 while CLKOUT+ is low and bit D9 while CLKOUT+ is high. |
| 30 | DVDD | power_in | 1.8V supply for the digital output drivers; bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 31 | D10_11- | output | Complement of DDR LVDS data output: carries bit D10 while CLKOUT+ is low and bit D11 while CLKOUT+ is high. |
| 32 | D10_11+ | output | DDR LVDS data output: carries bit D10 while CLKOUT+ is low and bit D11 while CLKOUT+ is high. |
| 33 | D12_13- | output | Complement of DDR LVDS data output: carries bit D12 while CLKOUT+ is low and bit D13 while CLKOUT+ is high. |
| 34 | D12_13+ | output | DDR LVDS data output: carries bit D12 while CLKOUT+ is low and bit D13 while CLKOUT+ is high. |
| 35 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 36 | SPI_MISO | output | SPI data output in serial mode (MODE=0); it is open-drain and needs a 2kΩ pull-up to the 1.8V-3.3V SPI supply only when reading back register data, and has no effect in parallel mode. |
| 37 | SPI_MOSI | input | SPI data input in serial mode (MODE=0); in parallel mode (MODE=VDD) it selects the LVDS output current, GND for 3.5mA and a 1.8V-3.3V logic high for 1.75mA. |
| 38 | SPI_SCLK | input | SPI clock input in serial mode (MODE=0); in parallel mode (MODE=VDD) it enables sleep mode when driven high at 1.8V-3.3V logic and runs normal operation when at GND. |
| 39 | SPI_CS | input | SPI chip-select input in serial mode (MODE=0); in parallel mode (MODE=VDD) it enables the clock duty-cycle stabilizer when driven high at 1.8V-3.3V logic and disables it when at GND. |
| 40 | MODE | input | Interface mode select: tie directly to GND for SPI serial mode or directly to VDD for parallel GPIO mode; it must not be driven by a logic signal. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Zynalog |
| Package | QFN-40(6x6) |
| Category | Data Acquisition |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog supply voltage | VDD | 1.7 | 1.8 | 1.9 | V | 4 | |
| Digital supply voltage | DVDD | 1.7 | 1.8 | 1.9 | V | 4 | |
| Integral nonlinearity | INL | -2 | 1 | 2 | LSB | 4 | |
| Differential nonlinearity | DNL | -0.6 | 0.35 | 0.6 | LSB | 4 | |
| Offset error | Offset Error | -13 | 5 | 13 | mV | 4 | |
| Gain error | Gain Error | -4 | 1 | 2.2 | %FS | 4 | |
| Digital output differential voltage (3.5mA mode) | V_OD | 247 | 350 | 454 | mV | 3.5mA 模式下 | 4 |
| Digital output differential voltage (1.75mA mode) | V_OD | 125 | 175 | 250 | mV | 1.75mA 模式下 | 4 |
| Digital output common-mode voltage | V_OS | 1.125 | 1.25 | 1.375 | V | 4 | |
| Analog supply input current | I_VDD | 147.5 | 150 | mA | 4 | ||
| High-speed clock input high hold time | tH | 3.8 | 4 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 | |
| High-speed clock input low hold time | tL | 3.8 | 4 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 | |
| Clock input to clock output delay | tC | 1.3 | 1.6 | 2 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock input to data output delay | tD | 1.7 | 2 | 2.3 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock output to data output skew (tC - tD) | tSKEW | 0.1 | 0.2 | 0.55 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| VDD, DVDD maximum input voltage range | VDD,DVDD | -0.3 | 2 | V | 6 | ||
| Analog Vin maximum input voltage (upper limit printed as VDD+0.2) | Analog Vin | -0.3 | V | 6 | |||
| CLK, SENSE maximum input voltage (upper limit printed as VDD+0.2) | CLK,SENSE | -0.3 | V | 6 | |||
| SPI/GPIO maximum digital voltage (lower limit printed as VDD) | SPI | 3.9 | V | 6 | |||
| LVDS data output maximum digital voltage (upper limit printed as DVDD+0.2) | Data Output | -0.3 | V | 6 | |||
| Working temperature | WORKING TEMP | -40 | 85 | °C | 6 | ||
| Storage temperature | STORAGE TEMP | -65 | 150 | °C | 6 | ||
| Digital supply input current | I_DVDD | 32 | mA | 4 | |||
| Power at 1.75mA LVDS output | P_1.75 | 225 | mW | 1.75mA LVDS 输出时 | 4 | ||
| Power at 3.5mA LVDS output | P_3.5 | 265 | mW | 3.5mA LVDS 输出时 | 4 | ||
| Low-power mode power | P_lowpower | 90 | mW | 4 | |||
| Sleep mode power | P_sleep | 0.65 | mW | 4 | |||
| Signal-to-noise ratio | SNR | 69 | dB | 4 | |||
| Spurious-free dynamic range | SFDR | 93 | dB | 4 | |||
| Clock input to data acquisition delay | tAP | 0.5 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 | ||
| CS low to CLK setup time | tS | 5 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| Data setup time | tDS | 5 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| Data hold time | tDH | 5 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| Clock to data output delay (SPI) | tDO | 125 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| SPI clock period (write) | tSCK | 40 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| SPI clock period (readback) | tSCK | 250 | ns | SPI_MISO pull-up 2KΩ | 15 | ||
| CLK high to CS high hold time | tH | 5 | ns | SPI_MISO pull-up 2KΩ | 15 |
CAD (KiCad official)
- Symbol:
ZGAD125S14 - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: QFN-40(6x6) (KiCad packages3D, STEP)
- 3D model files:
zgad125s14-etched.step/zgad125s14-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zgad125s14.step/zgad125s14.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Zynalog datasheet (19 pp, sha256
4079071e947c2c96, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ZGAD125S14
**Zynalog** · Analog To Digital Converters (ADC) · QFN-40(6x6)
ZGAD125S14 from Zynalog, in a QFN-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | 1.8V analog supply; bypass to ground with a 0.1µF ceramic capacitor, and pins 1 and 2 may share one bypass capacitor. |
| 2 | VDD | power_in | 1.8V analog supply; bypass to ground with a 0.1µF ceramic capacitor, and pin 2 may share the bypass capacitor of pin 1. |
| 3 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 4 | Vin+ | power_in | Positive differential analog input, driven 180° out of phase with Vin- around the VCM common-mode voltage, with the differential input kept within 1.5V. |
| 5 | Vin- | power_in | Negative differential analog input, driven 180° out of phase with Vin+ around the VCM common-mode voltage, with the differential input kept within 1.5V. |
| 6 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 7 | SENSE | input | External reference input: connect to VDD to select the internal reference (±0.75V input range), or drive with an external reference between 1.2V and 1.3V for a ±0.6×VSENSE input range. |
| 8 | VREF | power_in | Reference voltage output, nominally 1.25V; bypass to ground with a 2.2µF ceramic capacitor. |
| 9 | VCM | output | Common-mode bias output, nominally 0.435×VDD, used to set the common-mode bias of the analog inputs; bypass to ground with a 0.1µF ceramic capacitor. |
| 10 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 11 | CLK+ | input | Sampling clock input; conversion starts on the rising edge of the clock (differential with CLK-). |
| 12 | CLK- | input | Sampling clock input; conversion starts on the falling edge of the clock (differential with CLK+). |
| 13 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 14 | OF- | output | Complement of the overflow/underflow digital output; OF+ is high when an overflow or underflow occurs. |
| 15 | OF+ | output | Overflow/underflow digital output; OF+ goes high when an overflow or underflow occurs. |
| 16 | D0_1- | output | Complement of DDR LVDS data output: carries bit D0 while CLKOUT+ is low and bit D1 while CLKOUT+ is high. |
| 17 | D0_1+ | output | DDR LVDS data output: carries bit D0 while CLKOUT+ is low and bit D1 while CLKOUT+ is high; each LVDS pair needs an external 100Ω differential termination. |
| 18 | D2_3- | output | Complement of DDR LVDS data output: carries bit D2 while CLKOUT+ is low and bit D3 while CLKOUT+ is high. |
| 19 | D2_3+ | output | DDR LVDS data output: carries bit D2 while CLKOUT+ is low and bit D3 while CLKOUT+ is high; each LVDS pair needs an external 100Ω differential termination. |
| 20 | DVDD | power_in | 1.8V supply for the digital output drivers; bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 21 | DGND | power_in | Ground for the digital output drivers. |
| 22 | D4_5- | output | Complement of DDR LVDS data output: carries bit D4 while CLKOUT+ is low and bit D5 while CLKOUT+ is high. |
| 23 | D4_5+ | output | DDR LVDS data output: carries bit D4 while CLKOUT+ is low and bit D5 while CLKOUT+ is high. |
| 24 | D6_7- | output | Complement of DDR LVDS data output: carries bit D6 while CLKOUT+ is low and bit D7 while CLKOUT+ is high. |
| 25 | D6_7+ | output | DDR LVDS data output: carries bit D6 while CLKOUT+ is low and bit D7 while CLKOUT+ is high. |
| 26 | CLKOUT- | output | Complement of the LVDS data output clock; data normally transitions on the rising and falling edges of CLKOUT+, and the CLKOUT phase can be delayed relative to the data via the mode register. |
| 27 | CLKOUT+ | output | LVDS data output clock; data normally transitions on the rising and falling edges of CLKOUT+, and its phase can be delayed relative to the data via the mode register. |
| 28 | D8_9- | output | Complement of DDR LVDS data output: carries bit D8 while CLKOUT+ is low and bit D9 while CLKOUT+ is high. |
| 29 | D8_9+ | output | DDR LVDS data output: carries bit D8 while CLKOUT+ is low and bit D9 while CLKOUT+ is high. |
| 30 | DVDD | power_in | 1.8V supply for the digital output drivers; bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 31 | D10_11- | output | Complement of DDR LVDS data output: carries bit D10 while CLKOUT+ is low and bit D11 while CLKOUT+ is high. |
| 32 | D10_11+ | output | DDR LVDS data output: carries bit D10 while CLKOUT+ is low and bit D11 while CLKOUT+ is high. |
| 33 | D12_13- | output | Complement of DDR LVDS data output: carries bit D12 while CLKOUT+ is low and bit D13 while CLKOUT+ is high. |
| 34 | D12_13+ | output | DDR LVDS data output: carries bit D12 while CLKOUT+ is low and bit D13 while CLKOUT+ is high. |
| 35 | GND | power_in | Power ground; the exposed pad on the underside must be soldered to the PCB ground. |
| 36 | SPI_MISO | output | SPI data output in serial mode (MODE=0); it is open-drain and needs a 2kΩ pull-up to the 1.8V-3.3V SPI supply only when reading back register data, and has no effect in parallel mode. |
| 37 | SPI_MOSI | input | SPI data input in serial mode (MODE=0); in parallel mode (MODE=VDD) it selects the LVDS output current, GND for 3.5mA and a 1.8V-3.3V logic high for 1.75mA. |
| 38 | SPI_SCLK | input | SPI clock input in serial mode (MODE=0); in parallel mode (MODE=VDD) it enables sleep mode when driven high at 1.8V-3.3V logic and runs normal operation when at GND. |
| 39 | SPI_CS | input | SPI chip-select input in serial mode (MODE=0); in parallel mode (MODE=VDD) it enables the clock duty-cycle stabilizer when driven high at 1.8V-3.3V logic and disables it when at GND. |
| 40 | MODE | input | Interface mode select: tie directly to GND for SPI serial mode or directly to VDD for parallel GPIO mode; it must not be driven by a logic signal. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Zynalog |
| Package | QFN-40(6x6) |
| Category | Data Acquisition |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog supply voltage | VDD | 1.7 | 1.8 | 1.9 | V | | 4 |
| Digital supply voltage | DVDD | 1.7 | 1.8 | 1.9 | V | | 4 |
| Integral nonlinearity | INL | -2 | 1 | 2 | LSB | | 4 |
| Differential nonlinearity | DNL | -0.6 | 0.35 | 0.6 | LSB | | 4 |
| Offset error | Offset Error | -13 | 5 | 13 | mV | | 4 |
| Gain error | Gain Error | -4 | 1 | 2.2 | %FS | | 4 |
| Digital output differential voltage (3.5mA mode) | V_OD | 247 | 350 | 454 | mV | 3.5mA 模式下 | 4 |
| Digital output differential voltage (1.75mA mode) | V_OD | 125 | 175 | 250 | mV | 1.75mA 模式下 | 4 |
| Digital output common-mode voltage | V_OS | 1.125 | 1.25 | 1.375 | V | | 4 |
| Analog supply input current | I_VDD | | 147.5 | 150 | mA | | 4 |
| High-speed clock input high hold time | tH | | 3.8 | 4 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| High-speed clock input low hold time | tL | | 3.8 | 4 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock input to clock output delay | tC | 1.3 | 1.6 | 2 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock input to data output delay | tD | 1.7 | 2 | 2.3 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock output to data output skew (tC - tD) | tSKEW | 0.1 | 0.2 | 0.55 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| VDD, DVDD maximum input voltage range | VDD,DVDD | -0.3 | | 2 | V | | 6 |
| Analog Vin maximum input voltage (upper limit printed as VDD+0.2) | Analog Vin | -0.3 | | | V | | 6 |
| CLK, SENSE maximum input voltage (upper limit printed as VDD+0.2) | CLK,SENSE | -0.3 | | | V | | 6 |
| SPI/GPIO maximum digital voltage (lower limit printed as VDD) | SPI | | | 3.9 | V | | 6 |
| LVDS data output maximum digital voltage (upper limit printed as DVDD+0.2) | Data Output | -0.3 | | | V | | 6 |
| Working temperature | WORKING TEMP | -40 | | 85 | °C | | 6 |
| Storage temperature | STORAGE TEMP | -65 | | 150 | °C | | 6 |
| Digital supply input current | I_DVDD | | 32 | | mA | | 4 |
| Power at 1.75mA LVDS output | P_1.75 | | 225 | | mW | 1.75mA LVDS 输出时 | 4 |
| Power at 3.5mA LVDS output | P_3.5 | | 265 | | mW | 3.5mA LVDS 输出时 | 4 |
| Low-power mode power | P_lowpower | | 90 | | mW | | 4 |
| Sleep mode power | P_sleep | | 0.65 | | mW | | 4 |
| Signal-to-noise ratio | SNR | | 69 | | dB | | 4 |
| Spurious-free dynamic range | SFDR | | 93 | | dB | | 4 |
| Clock input to data acquisition delay | tAP | | 0.5 | | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| CS low to CLK setup time | tS | | 5 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| Data setup time | tDS | | 5 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| Data hold time | tDH | | 5 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| Clock to data output delay (SPI) | tDO | | 125 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| SPI clock period (write) | tSCK | | 40 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| SPI clock period (readback) | tSCK | | 250 | | ns | SPI_MISO pull-up 2KΩ | 15 |
| CLK high to CS high hold time | tH | | 5 | | ns | SPI_MISO pull-up 2KΩ | 15 |
## CAD (KiCad official)
- Symbol: `ZGAD125S14`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: QFN-40(6x6) (KiCad packages3D, STEP)
- 3D model files: `zgad125s14-etched.step` / `zgad125s14-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `zgad125s14.step` / `zgad125s14.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Zynalog datasheet](docs/zgad125s14-datasheet.pdf) (19 pp, sha256 `4079071e947c2c96`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/zgad125s14-datasheet.pdf)