main
History Download
Ray Publish 0.1.0 73ad581

ZD35M1GA-IB

Zetta · NAND FLASH · WSON-8-EP(6x8)

ZD35M1GA-IB from Zetta, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip select, active low: when LOW the device is active, when HIGH it is inactive and SO is High-Z.
2 SO/SIO1 bidirectional Serial data output in x1 mode and SIO1 in x2/x4 modes, clocked out on the falling edge of SCLK.
3 WP#/SIO2 bidirectional Write protect, active low, prevents block lock bits being altered when BRWD=1 and WP# is LOW; serves as SIO2 in x4 mode.
4 VSS power_in Ground.
5 SI/SIO0 bidirectional Serial data input for commands, addresses and data, latched on the rising edge of SCLK; serves as SIO0 in x2/x4 modes.
6 SCLK input Serial clock input supporting SPI Mode 0 and Mode 3, up to 104 MHz.
7 HOLD#/SIO3 bidirectional Hold input, active low, pauses serial communication without ending an operation in progress; serves as SIO3 in x4 mode.
8 VCC power_in Power supply, 1.7 to 1.95 V for the ZD35M1GA 1.8 V device.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Zetta
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 1.7 1.95 V ZD35M1GA 1.8V product 5
Ambient operating temperature (Industrial) TA -40 85 °C Temperature Range Option 6, 1.8V 30
Sequential read operating current ICC1 10 20 mA tRC = 50ns, CE#=VIL, IOUT=0mA 30
Program operating current ICC2 10 20 mA 30
Erase operating current ICC3 20 mA 30
Stand-by current (TTL) ICC4 1 mA CE#=VIH, WP#=0V/VCC 30
Stand-by current (CMOS) ICC5 10 50 uA CE#=VCC-0.2, WP#=0/VCC 30
Input leakage current ILI -10 10 uA VIN=0 to Vcc(max) 30
Output leakage current ILO -10 10 uA VOUT=0 to Vcc(max) 30
Input high voltage (min, fraction of VCC) VIH 0.8 xVCC 0.8xVCC 30
Input high voltage (max, above VCC) VIH 0.3 V VCC+0.3 30
Input low voltage (min) VIL -0.3 V 30
Input low voltage (max, fraction of VCC) VIL 0.2 xVCC 0.2xVCC 30
Output low voltage VOL 0.1 V IOL = 100uA 30
Output low current (RB#) IOL(RB#) 3 4 mA VOL=0.1V 30
Output low current (RB#) IOL(RB#) 8 10 mA VOL=0.4V 30
Valid block number NVB 1004 1024 Blocks 30
Ambient operating temperature option 6 TA -40 85 °C 1.8V 30
Temperature under bias TBIAS -50 125 °C 30
Storage temperature TSTG -65 150 °C 30
Input or output voltage VIO -0.6 2.7 V 1.8V 30
Supply voltage VCC -0.6 2.7 V 1.8V 30
Input/output capacitance CI/O 10 pF VIL = 0V, TA=25C, f=1.0MHz 31
Input capacitance CIN 10 pF VIN = 0V, TA=25C, f=1.0MHz 31
Read time tR 25 us 31
Read time with internal ECC enabled tR_ECC 45 70 us 31
Program time tPROG 300 700 us 31
Program time with internal ECC enabled tPROG_ECC 320 700 us 31
Partial program cycles in same page NOP 4 Cycle Main + Spare Array 31
Block erase time tBERS 2 10 ms 31
Clock frequency fC 104 MHz 1.8V 32
Clock LOW to output valid tV 10 ns 1.8V 32

CAD (KiCad official)

  • Symbol: ZD35M1GA-IB
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: zd35m1ga-ib-etched.step / zd35m1ga-ib-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zd35m1ga-ib.step / zd35m1ga-ib.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Zetta datasheet (39 pp, sha256 ebcb38ecedc5813a, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF