Generated by kicad-footprint-generator · KiCad file format 20260206
ZD25Q64BSIGT
Zetta · NOR FLASH · SOP-8-208mil
ZD25Q64BSIGT from Zetta, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /CS | input | Chip Select input; when high the device is deselected and the serial data output pins are at high impedance, and driving it low enables the device. |
| 2 | DO(IO1) | bidirectional | Serial data output in standard SPI, and data input/output 1 (IO1) for Dual and Quad instructions. |
| 3 | /WP(IO2) | bidirectional | Active-low Write Protect input that protects the Status Register, which becomes IO2 for Quad operation when QE=1 (WP function then unavailable). |
| 4 | GND | power_in | Ground. |
| 5 | DI(IO0) | bidirectional | Serial data input in standard SPI, and data input/output 0 (IO0) for Dual and Quad instructions. |
| 6 | CLK | input | Serial Clock input that times the interface; inputs are latched on the rising edge and data is shifted out on the falling edge. |
| 7 | /HOLD(IO3) | bidirectional | Active-low Hold input that pauses serial communication without deselecting the device, which becomes IO3 for Quad operation when QE=1 (HOLD function then unavailable). |
| 8 | VCC | power_in | Power supply, single 2.7V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Zetta |
| Package | SOP-8-208mil |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.6 | V | -0.6 to VCC+0.4 | 72 | ||
| Voltage Applied to Any Pin | VIO | -0.6 | V | Relative to Ground; -0.6 to VCC+0.4 | 72 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 72 | ||
| Electrostatic Discharge Voltage | VESD | -2000 | 2000 | V | Human Body Model | 72 | |
| Operating Supply Voltage | VCC | 2.7 | 3.6 | V | FR = 133MHz (Single/Dual/Quad SPI), fR = 50MHz (Read Data 03h) | 72 | |
| Operating Temperature | TA | -40 | 85 | °C | Industrial | 72 | |
| Erase/Program Cycles | 100000 | Cycles | 4KB sector, 32/64KB block or full chip | 72 | |||
| Data Retention | 20 | years | Full Temperature Range | 72 | |||
| VCC(min) to /CS Low | tVSL | 10 | µs | 73 | |||
| Time Delay Before Write Instruction | tPUW | 1 | 10 | ms | 73 | ||
| Write Inhibit Threshold Voltage | VWI | 1 | 2 | V | 73 | ||
| Input Capacitance | CIN | 6 | pF | VIN=0V | 74 | ||
| Output Capacitance | COUT | 8 | pF | VOUT=0V | 74 | ||
| Input Leakage | ILI | -2 | 2 | µA | 74 | ||
| I/O Leakage | ILO | -2 | 2 | µA | 74 | ||
| Standby Current | ICC1 | 10 | 50 | µA | /CS=VCC, VIN=GND or VCC | 74 | |
| Power-down Current | ICC2 | 2 | 20 | µA | /CS=VCC, VIN=GND or VCC | 74 | |
| Current Read Data/Dual/Quad 1MHz | ICC3 | 7 | mA | C=0.1 VCC / 0.9VCC, IO=Open | 74 | ||
| Current Read Data/Dual/Quad 50MHz | ICC3 | 15 | mA | C=0.1 VCC / 0.9VCC, IO=Open | 74 | ||
| Current Read Data/Dual/Quad 80MHz | ICC3 | 18 | mA | C=0.1 VCC / 0.9VCC, IO=Open | 74 | ||
| Current Read Data/Dual/Quad 104MHz | ICC3 | 20 | mA | C=0.1 VCC / 0.9VCC, IO=Open | 74 | ||
| Current Read Data/Dual/Quad 133MHz | ICC3 | 27 | mA | C=0.1 VCC / 0.9VCC, IO=Open | 74 | ||
| Current Write Status Register | ICC4 | 10 | 20 | mA | /CS=VCC | 74 | |
| Current Page Program | ICC5 | 15 | 25 | mA | /CS=VCC | 74 | |
| Current Sector/Block Erase | ICC6 | 15 | 25 | mA | /CS=VCC | 74 | |
| Current Chip Erase | ICC7 | 15 | 25 | mA | /CS=VCC | 74 | |
| Input Low Voltage | VIL | -0.5 | V | max printed as VCC x0.2 | 74 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL=100µA | 74 | ||
| Clock frequency, all instructions except Read Data (03h) | FR | 133 | MHz | 2.7V-3.6V VCC & Industrial Temperature; min D.C. | 77 | ||
| Clock freq. Read Data instruction (03h) | fR | 50 | MHz | min D.C. | 77 | ||
| Clock High, Low Time except Read Data (03h) | tCLH, tCLL | 3.5 | ns | 77 | |||
| Clock High, Low Time for Read Data (03h) | tCRLH, tCRLL | 8 | ns | 77 | |||
| /CS Active Setup Time relative to CLK | tSLCH | 5 | ns | 77 | |||
| /CS Not Active Hold Time relative to CLK | tCHSL | 5 | ns | 77 | |||
| Data In Setup Time | tDVCH | 2 | ns | 77 | |||
| Data In Hold Time | tCHDX | 3 | ns | 77 | |||
| /CS Active Hold Time relative to CLK | tCHSH | 5 | ns | 77 | |||
| /CS Not Active Setup Time relative to CLK | tSHCH | 5 | ns | 77 | |||
| /CS Deselect Time | tSHSL | 30 | ns | Read instructions / Write, Erase and Program instructions | 77 | ||
| Output Disable Time | tSHQZ | 7 | ns | 77 | |||
| Clock Low to Output Valid | tCLQV | 6 | ns | 77 | |||
| Clock Low to Output Valid (Except Main Read) | tCLQV | 7 | ns | 77 | |||
| Output Hold Time | tCLQX | 0 | ns | 77 | |||
| /HOLD to Output High-Z | tHLQZ | 12 | ns | 78 | |||
| /CS High to Power-down Mode | tDP | 3 | µs | 78 | |||
| /CS High to Standby Mode without Electronic Signature Read | tRES1 | 3 | µs | 78 | |||
| /CS High to Standby Mode with Electronic Signature Read | tRES2 | 1.8 | µs | 78 | |||
| /CS High to next Instruction after Suspend | tSUS | 20 | µs | 78 | |||
| CS High to next Instruction after Reset | tRST | 30 | µs | 78 | |||
| Write Status Register Time | tw | 5 | 15 | ms | 78 | ||
| Byte Program Time | tBP | 5 | 150 | µs | 78 | ||
| Page Program Time | tPP | 0.6 | 5 | ms | 78 | ||
| Sector Erase Time (4KB) | tSE | 0.06 | 0.4 | s | 78 | ||
| Block Erase Time (32KB) | tBE1 | 0.2 | 1.5 | s | 78 | ||
| Block Erase Time (64KB) | tBE2 | 0.3 | 2 | s | 78 | ||
| Chip Erase Time | tCE | 30 | 150 | s | 78 |
CAD (KiCad official)
- Symbol:
ZD25Q64BSIGT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-208mil (KiCad packages3D, STEP)
- 3D model files:
zd25q64bsigt-etched.step/zd25q64bsigt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zd25q64bsigt.step/zd25q64bsigt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Zetta datasheet (85 pp, sha256
7097d5ba927c84cb, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).