component
ZAM6228
Public Made by Adomby adom
ZLG Zhiyuan Elec Sensor Modules, DIP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownZAM6228
ZLG Zhiyuan Elec · Sensor Modules · DIP-24
ZAM6228 from ZLG Zhiyuan Elec, in a DIP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply, 3.3 V nominal (3.15 to 3.45 V); input surge must not exceed 5 V. |
| 2 | GND | power_in | Power ground. |
| 3 | A0 | input | I2C address select bit 0; must not be left floating. |
| 4 | RTD1234C | passive | Common C terminal for channels 1 to 4 of the three-wire PT100 connection. |
| 5 | RTD1A | passive | Channel 1 RTD A terminal. |
| 6 | RTD1B | passive | Channel 1 RTD B terminal. |
| 7 | RTD2A | passive | Channel 2 RTD A terminal. |
| 8 | RTD2B | passive | Channel 2 RTD B terminal. |
| 9 | RTD3A | passive | Channel 3 RTD A terminal. |
| 10 | RTD3B | passive | Channel 3 RTD B terminal. |
| 11 | RTD4A | passive | Channel 4 RTD A terminal. |
| 12 | RTD4B | passive | Channel 4 RTD B terminal. |
| 13 | RTD8B | passive | Channel 8 RTD B terminal. |
| 14 | RTD8A | passive | Channel 8 RTD A terminal. |
| 15 | RTD7B | passive | Channel 7 RTD B terminal. |
| 16 | RTD7A | passive | Channel 7 RTD A terminal. |
| 17 | RTD6B | passive | Channel 6 RTD B terminal. |
| 18 | RTD6A | passive | Channel 6 RTD A terminal. |
| 19 | RTD5B | passive | Channel 5 RTD B terminal. |
| 20 | RTD5A | passive | Channel 5 RTD A terminal. |
| 21 | RTD5678C | passive | Common C terminal for channels 5 to 8 of the three-wire PT100 connection. |
| 22 | A1 | input | I2C address select bit 1; must not be left floating. |
| 23 | SDA | bidirectional | I2C data line; needs an external 4.7 kΩ pull-up resistor. |
| 24 | SCL | input | I2C clock line; needs an external 4.7 kΩ pull-up resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZLG Zhiyuan Elec |
| Package | DIP-24 |
| Category | Sensors |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入冲击电压 (input surge voltage, 1 s max) | -0.3 | 5 | VDC | 1s, max | 2 | ||
| 引脚焊接温度 (pin soldering temperature) | 300 | ℃ | Distance from case 1.5mm, 10 s | 2 | |||
| 输入电压 (input voltage) | VDD | 3.15 | 3.3 | 3.45 | V | 2 | |
| I/O 输入低电平 (I/O input low level) | VIL | -0.3 | 0 | 0.4 | V | 2 | |
| I/O 输出低电平 (I/O output low level) | VOL | 0 | 0.4 | V | 2 | ||
| 测温范围 (temperature measurement range) | -200 | 850 | ℃ | 2 | |||
| 测温精度 (temperature measurement accuracy) | -0.1 | 0.1 | ℃ | 常温下 (at room temperature) | 2 | ||
| 温漂 (temperature drift) | 5 | 10 | 15 | ppm/℃ | 2 | ||
| 工作温度 (operating temperature) | -40 | 25 | 85 | ℃ | 2 | ||
| 存储温度 (storage temperature) | -40 | 25 | 105 | ℃ | 2 | ||
| 存储湿度 (storage humidity) | 95 | % | 无凝结 (non-condensing) | 2 |
CAD (KiCad official)
- Symbol:
ZAM6228 - Footprint:
Package_DIP:DIP-24_W7.62mm - 3D model: DIP-24 (KiCad packages3D, STEP)
- 3D model files:
zam6228-etched.step/zam6228-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zam6228.step/zam6228.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZLG Zhiyuan Elec datasheet (5 pp, sha256
29bf80c4d30e8537, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).