component
YC164-JR-07100RL
Public Made by Adomby adom
YAGEO Resistor Networks & Arrays, 0603x4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownYC164-JR-07100RL
YAGEO · Resistor Networks & Arrays · 0603x4
YC164-JR-07100RL from YAGEO, in a 0603x4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R1_A | passive | One terminal of resistor R1, connected across the array to pin 5; 1/16 W per resistor, 50 V max working voltage. |
| 2 | R2_A | passive | One terminal of resistor R2, connected across the array to pin 6; R1=R2=R3=R4, 1/16 W per resistor. |
| 3 | R3_A | passive | One terminal of resistor R3, connected across the array to pin 7; R1=R2=R3=R4, 1/16 W per resistor. |
| 4 | R4_A | passive | One terminal of resistor R4, connected across the array to pin 8; R1=R2=R3=R4, 1/16 W per resistor. |
| 5 | R1_B | passive | Other terminal of resistor R1, connected to pin 1; rated current 1.0 A, max current 2.0 A. |
| 6 | R2_B | passive | Other terminal of resistor R2, connected to pin 2; rated current 1.0 A, max current 2.0 A. |
| 7 | R3_B | passive | Other terminal of resistor R3, connected to pin 3; rated current 1.0 A, max current 2.0 A. |
| 8 | R4_B | passive | Other terminal of resistor R4, connected to pin 4; rated current 1.0 A, max current 2.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YAGEO |
| Package | 0603x4 |
| Category | Resistors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (J = ±5%) | -5 | 5 | % | E24 ±5% (ordering letter J) | 7 | ||
| Temperature coefficient of resistance | TCR | -200 | 200 | ppm/°C | YC164 column | 7 | |
| Operating temperature range | -55 | 155 | °C | YC164 column; full power to 70 °C, derated to 0 % at 155 °C | 7 | ||
| Resistance change, operational life/endurance | -2 | 2 | % | 1,000 h at 70±5 °C, RCWV 1.5 h on / 0.5 h off, still air; plus 0.05 Ω absolute | 9 | ||
| Resistance change, high temperature exposure | -1 | 1 | % | 1,000 h at max operating temperature, unpowered; plus 0.05 Ω absolute | 9 | ||
| Resistance change, moisture resistance | -2 | 2 | % | 10 d, 3 cycles/24 h, 25/65 °C 95% R.H., unpowered; plus 0.05 Ω absolute | 9 | ||
| Resistance change, thermal shock | -1 | 1 | % | -55/+125 °C, 300 cycles; plus 0.05 Ω absolute | 9 | ||
| Resistance change, short time overload | -2 | 2 | % | 2.5 times RCWV or max overload voltage, 5 s at room temperature; plus 0.05 Ω absolute | 9 | ||
| Resistance change, board flex/bending | -1 | 1 | % | 3 mm bending, 60±5 s; plus 0.05 Ω absolute | 9 | ||
| Resistance change, resistance to soldering heat | -1 | 1 | % | Leadfree solder, 260 °C, 10 s immersion; plus 0.05 Ω absolute | 10 | ||
| Resistance change, biased humidity | -5 | 5 | % | 1,000 h; 85 °C / 85% RH; 10% of operating power; plus 0.05 Ω absolute | 10 | ||
| Maximum working voltage | MWV | 50 | V | YC164 column | 7 | ||
| Rated continuous voltage (column printed as RCOV) | RCOV | 100 | V | YC164 column; header printed RCOV, test table uses RCWV | 7 | ||
| Dielectric withstanding voltage | DWV | 100 | V | YC164 column | 7 | ||
| Resistance range (lower limit) | R | 1 | Ω | E24 ±5% and E24/E96 ±1%; printed range 1Ω ≤ R ≤ 1MΩ (upper limit printed in MΩ, not in Ω) | 7 | ||
| Nominal resistance | R | 100 | Ω | Ordering code 100R = 100 Ω, tolerance J (±5%) | 2 |
CAD (KiCad official)
- Symbol:
YC164-JR-07100RL - Footprint:
Resistor_SMD:R_Array_Convex_4x0603 - 3D model: 0603x4 (KiCad packages3D, STEP)
- 3D model files:
yc164-jr-07100rl-etched.step/yc164-jr-07100rl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);yc164-jr-07100rl.step/yc164-jr-07100rl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YAGEO datasheet (12 pp, sha256
5bdf9b18c106780d, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).