component
Y26003271C2040DYJY
Public Made by Adomby adom
JGHC Crystals, DT-26. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
| y26003271c2040dyjy-etched.glb | 16d ago |
| y26003271c2040dyjy-etched.step | 16d ago |
| y26003271c2040dyjy-hero.glb | 16d ago |
| y26003271c2040dyjy-hero.overlay.json | 16d ago |
| y26003271c2040dyjy.glb | 16d ago |
| y26003271c2040dyjy.kicad_mod | 16d ago |
| y26003271c2040dyjy.kicad_sym | 16d ago |
| y26003271c2040dyjy.lbr | 16d ago |
| y26003271c2040dyjy.step | 16d ago |
Y26003271C2040DYJY
JGHC · Crystals · DT-26
Y26003271C2040DYJY from JGHC, in a DT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of a two-terminal crystal; either orientation. |
| 2 | 2 | passive | Terminal 2 of a two-terminal crystal; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JGHC |
| Package | DT-26 |
| Category | Crystals, Oscillators, Resonators |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency tolerance at 25℃ | -20 | 20 | ppm | at 25℃ | 2 | ||
| Aging (first year) | -3 | 3 | ppm | First year | 2 | ||
| Shunt capacitance | 3 | pF | 2 | ||||
| Equivalent series resistance | 40 | KΩ | 2 | ||||
| Insulation resistance | 500 | MΩ | DC100V | 2 | |||
| Solderability (lead coverage) | 95 | % | Dipped lead surface covered with continuous new solder | 3 | |||
| Operating temperature range | -20 | 70 | ℃ | 2 | |||
| Storage temperature range | -40 | 85 | ℃ | 2 | |||
| Recommended drive level | 1 | μW | Less than 1.0μW is recommended | 5 | |||
| Lead soldering temperature | 380 | ℃ | Lead wire soldered within 3 seconds with iron | 2 | |||
| Dip soldering temperature | 260 | ℃ | In dip mounting, soldered within 10 seconds | 2 | |||
| Solder heat resistance (material melting point) | 230 | ºC | Heating package above this may deteriorate characteristics | 5 | |||
| Frequency change after vibration | -5 | 5 | ppm | 10-55Hz, 1.5mm amplitude, 2h each direction X.Y.Z | 3 | ||
| Resistance change after vibration | 5 | kohm | 10-55Hz, 1.5mm amplitude, 2h each direction X.Y.Z | 3 | |||
| Frequency change after shock | -5 | 5 | ppm | 3 free drops from 75cm onto hardwood board | 3 | ||
| Resistance change after shock | 5 | kohm | 3 free drops from 75cm onto hardwood board | 3 | |||
| Frequency change after high temperature | -5 | 5 | ppm | 96 hours at +100℃±2℃ | 3 | ||
| Resistance change after high temperature | 5 | kohm | 96 hours at +100℃±2℃ | 3 | |||
| Frequency change after low temperature | -5 | 5 | ppm | 72 hours at -40℃±2℃ | 3 | ||
| Resistance change after low temperature | 5 | kohm | 72 hours at -40℃±2℃ | 3 | |||
| Frequency change after humidity | -5 | 5 | ppm | 96 hours at +40℃±2℃, relative humidity 90-95% | 3 | ||
| Resistance change after humidity | 5 | kohm | 96 hours at +40℃±2℃, relative humidity 90-95% | 3 | |||
| Frequency change after temperature cycle | -5 | 5 | ppm | 50 cycles | 3 | ||
| Resistance change after temperature cycle | 5 | kohm | 50 cycles | 3 | |||
| Frequency change after salt spray | -5 | 5 | ppm | GB/T10125-1997 | 3 | ||
| Resistance change after salt spray | 5 | kohm | GB/T10125-1997 | 3 | |||
| Frequency change after lead strength | -5 | 5 | ppm | 2.00 Kg tensile force on lead, kept more than 5 seconds | 3 | ||
| Resistance change after lead strength | 5 | kohm | 2.00 Kg tensile force on lead, kept more than 5 seconds | 3 | |||
| Nominal frequency | 32.768 | KHz | 2 | ||||
| Load capacitance | 12.5 | pf | 2 | ||||
| Drive level | 0.1 | uW | 2 | ||||
| Temperature frequency stability | -0.04 | ppm/deg. C | Temperature frequency stability characteristic as printed | 2 |
CAD (KiCad official)
- Symbol:
Y26003271C2040DYJY - Footprint:
Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical - 3D model: DT-26 (KiCad packages3D, STEP)
- 3D model files:
y26003271c2040dyjy-etched.step/y26003271c2040dyjy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);y26003271c2040dyjy.step/y26003271c2040dyjy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JGHC datasheet (5 pp, sha256 ``, retrieved 2026-10-14, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarycrystal numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).