main
Ray xw12a: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e8fb368
{
  "schema_version": 1,
  "type": "component",
  "slug": "xw12a",
  "title": "XW12A",
  "brief": "Sam wing Touch Sensors, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "sensors",
    "xw12a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "XW12A",
    "manufacturer": "Sam wing",
    "package": "SSOP-24-150mil",
    "pin_count": 24,
    "category": "Sensors",
    "subcategory": "Touch Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884441800585216",
    "parts": {
      "symbol": "xw12a.kicad_sym",
      "footprint": "xw12a.kicad_mod",
      "model_3d": "xw12a-etched.glb",
      "model_3d_plain": "xw12a.glb",
      "model_3d_step": "xw12a-etched.step",
      "model_3d_step_plain": "xw12a.step",
      "lbr": "xw12a.lbr"
    },
    "distributor_links": {
      "lcsc": "C389618"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection, power return path"
      },
      {
        "number": "2",
        "name": "C1",
        "type": "passive",
        "description": "Internal balanced capacitor interface connection for external 1nf-10nf capacitor (4.7nf recommended)"
      },
      {
        "number": "3",
        "name": "CSEL",
        "type": "passive",
        "description": "Sensitivity adjustment capacitor interface, external capacitor value 0-100pF determines detection sensitivity (smaller value increases sensitivity)"
      },
      {
        "number": "4",
        "name": "PAD0",
        "type": "input",
        "description": "Capacitive touch sensor input for key 0, floating when unused"
      },
      {
        "number": "5",
        "name": "PAD1",
        "type": "input",
        "description": "Capacitive touch sensor input for key 1, floating when unused"
      },
      {
        "number": "6",
        "name": "PAD2",
        "type": "input",
        "description": "Capacitive touch sensor input for key 2, floating when unused"
      },
      {
        "number": "7",
        "name": "PAD3",
        "type": "input",
        "description": "Capacitive touch sensor input for key 3, floating when unused"
      },
      {
        "number": "8",
        "name": "PAD4",
        "type": "input",
        "description": "Capacitive touch sensor input for key 4, floating when unused"
      },
      {
        "number": "9",
        "name": "PAD5",
        "type": "input",
        "description": "Capacitive touch sensor input for key 5, floating when unused"
      },
      {
        "number": "10",
        "name": "PAD6",
        "type": "input",
        "description": "Capacitive touch sensor input for key 6, floating when unused"
      },
      {
        "number": "11",
        "name": "PAD7",
        "type": "input",
        "description": "Capacitive touch sensor input for key 7, floating when unused"
      },
      {
        "number": "12",
        "name": "PAD8",
        "type": "input",
        "description": "Capacitive touch sensor input for key 8, floating when unused"
      },
      {
        "number": "13",
        "name": "PAD9",
        "type": "input",
        "description": "Capacitive touch sensor input for key 9, floating when unused"
      },
      {
        "number": "14",
        "name": "PAD10",
        "type": "input",
        "description": "Capacitive touch sensor input for key 10, floating when unused"
      },
      {
        "number": "15",
        "name": "PAD11",
        "type": "input",
        "description": "Capacitive touch sensor input for key 11, floating when unused"
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "Internal test pin, floating not to be connected to external circuitry"
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "Internal test pin, floating not to be connected to external circuitry"
      },
      {
        "number": "18",
        "name": "INT",
        "type": "tri_state",
        "description": "Key valid output open-drain, drives low when any key is pressed, high-impedance otherwise"
      },
      {
        "number": "19",
        "name": "ASEL",
        "type": "input",
        "description": "I2C address selection input, determines chip address high=44H, low=42H, floating=40H"
      },
      {
        "number": "20",
        "name": "AO",
        "type": "output",
        "description": "Analog voltage output proportional to pressed key, outputs VDD when no key pressed, output impedance 20-30kΩ"
      },
      {
        "number": "21",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input, maximum baud rate 400kbit/s"
      },
      {
        "number": "22",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data input/output line, bidirectional data transmission with pull-up resistor"
      },
      {
        "number": "23",
        "name": "BUZZ",
        "type": "output",
        "description": "Buzzer drive output at fixed 2.7kHz frequency, sources/sinks 30-40mA at 5V nominal"
      },
      {
        "number": "24",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive power supply input, operating voltage range 2.5-5.5V"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 9,
        "cost_usd": 0.2063,
        "at": "2026-09-22T10:59:12"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884441800585216",
        "pages": 9,
        "sha256": "d41fe6a9c52332e2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xw12a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xw12a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8bc9450b3137e6d966b1ffe06504cbf7c26637dd9de0aa87efcc8034473cc54b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Sam wing",
      "Package": "SSOP-24-150mil",
      "Category": "Sensors",
      "Pins": "24"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "xw12a"
  ],
  "discovery_pitch": "XW12A (Sam wing) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xw12a.kicad_sym",
    "xw12a.kicad_mod",
    "xw12a.glb",
    "xw12a.step",
    "xw12a.lbr",
    "docs/hero.png",
    "docs/xw12a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T14:43:01.035Z"
}