component

XW09A

Public Made by Adom

by adom

Sam wing Touch Sensors, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentsensorxw09a
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

XW09A

Sam wing · Touch Sensors · SOP-16

XW09A from Sam wing, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground (0V) reference for the chip.
2 C1 passive Internal balance capacitor interface. Connect an external NPO capacitor (1nF-10nF range, 4.7nF recommended) between this pin and GND.
3 CSEL passive Sensitivity adjustment capacitor interface. Connect an external capacitor (0-100pF) between this pin and GND; smaller capacitance yields higher sensitivity, and leaving it open gives maximum sensitivity.
4 PAD0 input Capacitive touch key input channel 0. Connect to a touch sensing pad (typ. 3-30mm square/round conductor) via a series 1k resistor; leave floating if unused.
5 PAD1 input Capacitive touch key input channel 1. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
6 PAD2 input Capacitive touch key input channel 2. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
7 PAD3 input Capacitive touch key input channel 3. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
8 PAD4 input Capacitive touch key input channel 4. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
9 PAD5 input Capacitive touch key input channel 5. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
10 PAD6 input Capacitive touch key input channel 6. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
11 PAD7 input Capacitive touch key input channel 7. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
12 PAD8 input Capacitive touch key input channel 8. Connect to a touch sensing pad via a series 1k resistor; leave floating if unused.
13 INT output Key-valid interrupt output (open-drain). Asserts low when a touch key is active; requires an external pull-up resistor (typ. 10k) to VDD.
14 SCL input I2C serial clock line (up to 400 kbit/s). Requires an external pull-up resistor (typ. 10k) to VDD. XW09A operates as an I2C slave (read-only).
15 SDA bidirectional I2C serial data line. Requires an external pull-up resistor (typ. 10k) to VDD. Slave address A[6:0]=0x40 (full 8-bit read address 0x81). Also used as a sleep-cancel input: pulling SDA low at least every 20s keeps the device out of sleep mode.
16 VDD power_in Positive supply input. Operating range 2.5V to 5.5V (absolute max 6.0V). Typical operating current 0.8mA @ 3.0V, 1.6mA @ 5.0V; sleep current ~90uA. Decouple with 100nF close to the pin.

Key specifications

Parameter Value
Manufacturer Sam wing
Package SOP-16
Category Sensor
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • XW09ASOP16L

CAD (KiCad official)

  • Symbol: XW09A
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: xw09a-etched.step / xw09a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xw09a.step / xw09a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sam wing datasheet (6 pp, sha256 6524ad9322c04543, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF