component
XW05B
Public Made by Adomby adom
Sam wing Touch Sensors, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/xw05b
c0db387
XW05B
Sam wing · Touch Sensors · SOP-16
XW05B from Sam wing, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground (negative supply reference). |
| 2 | C1 | passive | Internal balance capacitor connection, 1nF to 10nF with 4.7nF typical. |
| 3 | CSEL | passive | Sensitivity adjustment capacitor connection, 0 to 100 pF, smaller values increase sensitivity. |
| 4 | PAD0 | input | Touch key pad 0 input, floating when unused. |
| 5 | PAD1 | input | Touch key pad 1 input, floating when unused. |
| 6 | PAD2 | input | Touch key pad 2 input, floating when unused. |
| 7 | PAD3 | input | Touch key pad 3 input, floating when unused. |
| 8 | PAD4 | input | Touch key pad 4 input, floating when unused. |
| 9 | OUT4 | tri_state | Channel 4 open-drain output, low when pad 4 pressed and high impedance when released, requires pull-up resistor. |
| 10 | OUT3 | tri_state | Channel 3 open-drain output, low when pad 3 pressed and high impedance when released, requires pull-up resistor. |
| 11 | OUT2 | tri_state | Channel 2 open-drain output, low when pad 2 pressed and high impedance when released, requires pull-up resistor. |
| 12 | OUT1 | tri_state | Channel 1 open-drain output, low when pad 1 pressed and high impedance when released, requires pull-up resistor. |
| 13 | OUT0 | tri_state | Channel 0 open-drain output, low when pad 0 pressed and high impedance when released, requires pull-up resistor. |
| 14 | AO | output | Analog voltage output with 1% accuracy, VDD when no key pressed, 4/16VDD to 8/16VDD for PAD0 to PAD4. |
| 15 | NC | unconnected | No connection, internal floating pin. |
| 16 | VDD | power_in | Positive power supply input, 2.5V to 5.5V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam wing |
| Package | SOP-16 |
| Category | Sensors |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
XW05B - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
xw05b-etched.step/xw05b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xw05b.step/xw05b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sam wing datasheet (5 pp, sha256
134766bc7593ae4e, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XW05B
**Sam wing** · Touch Sensors · SOP-16
XW05B from Sam wing, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground (negative supply reference). |
| 2 | C1 | passive | Internal balance capacitor connection, 1nF to 10nF with 4.7nF typical. |
| 3 | CSEL | passive | Sensitivity adjustment capacitor connection, 0 to 100 pF, smaller values increase sensitivity. |
| 4 | PAD0 | input | Touch key pad 0 input, floating when unused. |
| 5 | PAD1 | input | Touch key pad 1 input, floating when unused. |
| 6 | PAD2 | input | Touch key pad 2 input, floating when unused. |
| 7 | PAD3 | input | Touch key pad 3 input, floating when unused. |
| 8 | PAD4 | input | Touch key pad 4 input, floating when unused. |
| 9 | OUT4 | tri_state | Channel 4 open-drain output, low when pad 4 pressed and high impedance when released, requires pull-up resistor. |
| 10 | OUT3 | tri_state | Channel 3 open-drain output, low when pad 3 pressed and high impedance when released, requires pull-up resistor. |
| 11 | OUT2 | tri_state | Channel 2 open-drain output, low when pad 2 pressed and high impedance when released, requires pull-up resistor. |
| 12 | OUT1 | tri_state | Channel 1 open-drain output, low when pad 1 pressed and high impedance when released, requires pull-up resistor. |
| 13 | OUT0 | tri_state | Channel 0 open-drain output, low when pad 0 pressed and high impedance when released, requires pull-up resistor. |
| 14 | AO | output | Analog voltage output with 1% accuracy, VDD when no key pressed, 4/16*VDD to 8/16*VDD for PAD0 to PAD4. |
| 15 | NC | unconnected | No connection, internal floating pin. |
| 16 | VDD | power_in | Positive power supply input, 2.5V to 5.5V operating range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam wing |
| Package | SOP-16 |
| Category | Sensors |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `XW05B`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `xw05b-etched.step` / `xw05b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xw05b.step` / `xw05b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sam wing datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906263463251968) (5 pp, sha256 `134766bc7593ae4e`, retrieved 2026-09-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xw05b-datasheet.pdf)