main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs xw01t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers xw01t: viewers · Ray
package.json xw01t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json xw01t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/xw01t · Ray
xw01t-etched.fit.json xw01t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xw01t-etched.glb xw01t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xw01t-etched.step xw01t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xw01t.glb Publish 0.1.0 · Ray
xw01t.kicad_mod Publish 0.1.0 · Ray
xw01t.kicad_sym Publish 0.1.0 · Ray
xw01t.lbr Publish 0.1.0 · Ray
xw01t.step Publish 0.1.0 · Ray

XW01T

Sam wing · Touch Sensors · SOT-23-6

XW01T from Sam wing, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply positive pin, operating voltage range 2.5V to 5.5V.
2 GND power_in Ground and negative power supply reference pin.
3 OUT output Open-drain key sensing output; high impedance when no key detected, low level when key detected; requires external pull-up resistor to VDD.
4 C2 passive Reference capacitor pin; capacitance value should match total parasitic capacitance of KEY pin for baseline detection comparison.
5 KEY input Touch sensing input pin with 2kΩ series resistor for capacitive touch detection.
6 C1 passive Internal balance capacitor interface; connect 4.7nF capacitor to GND, capacitor range 1nF to 10nF.

Key specifications

Parameter Value
Manufacturer Sam wing
Package SOT-23-6
Category Sensors
Pins 6

CAD (KiCad official)

  • Symbol: XW01T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: xw01t-etched.step / xw01t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xw01t.step / xw01t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sam wing datasheet (8 pp, sha256 9b444a6d30ce0c73, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF