main
Ray
Publish 0.1.0
d3e750a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178
{
"slug": "xw01",
"version": "0.1.0",
"type": "component",
"description": "Sam&wing Touch Sensors, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"xw01",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xw01.kicad_sym",
"xw01.kicad_mod",
"xw01.glb",
"xw01.step",
"xw01.lbr",
"docs/hero.png",
"docs/xw01-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"xw01-hero.glb",
"xw01-hero.overlay.json",
"xw01-etched.glb"
],
"component": {
"mpn": "XW01",
"manufacturer": "Sam&wing",
"package": "SOT-23-6",
"pin_count": 6,
"category": "Sensors",
"subcategory": "Touch Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/db0029b23437abb5e14903cd960d9049.pdf",
"parts": {
"symbol": "xw01.kicad_sym",
"footprint": "xw01.kicad_mod",
"model_3d": "xw01-hero.glb",
"model_3d_plain": "xw01-etched.glb",
"model_3d_step": "xw01-etched.step",
"model_3d_step_plain": "xw01.step",
"lbr": "xw01.lbr"
},
"distributor_links": {
"lcsc": "C5264413"
},
"distributor_check": {
"checked_at": "2026-10-23T12:24:27Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Positive power supply input, 2.5V to 5.5V operating range, with a mandatory 20Ω series resistor from the supply and 100nF decoupling to GND."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Negative power supply and reference ground."
},
{
"number": "3",
"name": "OUT",
"type": "output",
"description": "Open-drain key-sense output that is high-impedance when no touch is detected and low when a touch is detected, requiring an external pull-up resistor to VDD."
},
{
"number": "4",
"name": "C2",
"type": "input",
"description": "Reference capacitor pin used as the detection comparison baseline, typically 5-15pF and larger than the total parasitic capacitance of the KEY pin (use a C0G/NP0 capacitor)."
},
{
"number": "5",
"name": "KEY",
"type": "input",
"description": "Touch sensing input connected through a series resistor of 2kΩ to 10kΩ (2kΩ typical) to the sense pad."
},
{
"number": "6",
"name": "C1",
"type": "input",
"description": "Internal balance capacitor interface, typically 4.7nF to GND (range 1nF to 10nF)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 7,
"cost_usd": 0.0404,
"at": "2026-10-23T12:24:14"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/db0029b23437abb5e14903cd960d9049.pdf",
"pages": 7,
"sha256": "9f993e853c2e3903",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xw01.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xw01-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b4dc3157782655d839b5cce0acd3e57cb56117b43774d02892b7d17b8fd86c86",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}