← Commit history

Publish 0.1.1

Ray ·cf3a7a66b0 · ·parent 917fc99
4 files changed +306−298
README.md+7−7
@@ -9,13 +9,13 @@ XW01-SOP8 from Sam&wing, in a SOP-8. Pinout and pin descriptions extracted from | Pin | Name | Type | Function | |---|---|---|---| | 1 | GND | power_in | Ground pin of the XW01 capacitive touch sensing chip. |-| 2 | C1 | passive | C1 pin shown in the pin diagram; its function text is not legible in the supplied datasheet text. |-| 3 | CSEL | passive | Sensitivity adjustment pin that takes a CSEL capacitor of 0pF to 100pF. |-| 4 | C2 | passive | C2 pin used with the sensitivity adjustment network; its detailed function text is not legible in the supplied datasheet text. |-| 5 | KEY | input | Touch key sensing input pin of the XW01. |-| 6 | OUT | output | Key output pin of the XW01, which reports the key state. |-| 7 | NC | unconnected | No-connect pin. |-| 8 | VDD | power_in | Positive supply pin, with a 2.5V to 5.5V operating voltage range. |+| 2 | C1 | passive | C1 pin shown on the pinout diagram; the text available does not state its function. |+| 3 | CSEL | passive | Sensitivity adjustment pin that takes a capacitor of 0pF to 100pF, where 0pF means no capacitor on CSEL. |+| 4 | C2 | passive | C2 pin shown on the pinout diagram; the text available does not state its function. |+| 5 | KEY | input | Touch key sensing pin; the pin table text was not readable, so the function is inferred from the pin name. |+| 6 | OUT | output | Key output pin that reports the touch key state; the pin table text was not readable. |+| 7 | NC | unconnected | No connection pin. |+| 8 | VDD | power_in | Positive supply pin, with an operating voltage of 2.5V~5.5V. |  ## Key specifications 
package.json+13−13
@@ -1,6 +1,6 @@ {   "slug": "xw01-sop8",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Sam&wing Touch Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C5264412"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:11Z",+      "checked_at": "2026-11-12T06:02:10Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -74,43 +74,43 @@         "number": "2",         "name": "C1",         "type": "passive",-        "description": "C1 pin shown in the pin diagram; its function text is not legible in the supplied datasheet text."+        "description": "C1 pin shown on the pinout diagram; the text available does not state its function."       },       {         "number": "3",         "name": "CSEL",         "type": "passive",-        "description": "Sensitivity adjustment pin that takes a CSEL capacitor of 0pF to 100pF."+        "description": "Sensitivity adjustment pin that takes a capacitor of 0pF to 100pF, where 0pF means no capacitor on CSEL."       },       {         "number": "4",         "name": "C2",         "type": "passive",-        "description": "C2 pin used with the sensitivity adjustment network; its detailed function text is not legible in the supplied datasheet text."+        "description": "C2 pin shown on the pinout diagram; the text available does not state its function."       },       {         "number": "5",         "name": "KEY",         "type": "input",-        "description": "Touch key sensing input pin of the XW01."+        "description": "Touch key sensing pin; the pin table text was not readable, so the function is inferred from the pin name."       },       {         "number": "6",         "name": "OUT",         "type": "output",-        "description": "Key output pin of the XW01, which reports the key state."+        "description": "Key output pin that reports the touch key state; the pin table text was not readable."       },       {         "number": "7",         "name": "NC",         "type": "unconnected",-        "description": "No-connect pin."+        "description": "No connection pin."       },       {         "number": "8",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin, with a 2.5V to 5.5V operating voltage range."+        "description": "Positive supply pin, with an operating voltage of 2.5V~5.5V."       }     ],     "provenance": {@@ -124,12 +124,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbering and names come from the page 2 package drawing (pin 1 at the top left by the dot, coun",+          "extractor flagged: Pin numbers and names come from the page 2 pinout diagram. The text of the pin description table on ; The datasheet text I have is only partly readable (Chinese text is missing). I could not confirm tha",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 8,-        "cost_usd": 0.1983,-        "at": "2026-11-12T04:55:51"+        "cost_usd": 0.2008,+        "at": "2026-11-12T06:02:02"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1d0c40fb1015a1967ef3da0b18c41152.pdf",@@ -184,7 +184,7 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "15b857a0f9a376865616001237245dd3da82f65532c5166503e3d44c7e32465a",+        "sha256": "8dce7a59bdd4e73b694bed4386655cd6a25049edc50fba6a948add926f624bf4",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+25−22
@@ -4,7 +4,7 @@   "slug": "xw01-sop8",   "title": "XW01-SOP8",   "brief": "Sam&wing Touch Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C5264412"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:11Z",+      "checked_at": "2026-11-12T06:02:10Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -56,43 +56,43 @@         "number": "2",         "name": "C1",         "type": "passive",-        "description": "C1 pin shown in the pin diagram; its function text is not legible in the supplied datasheet text."+        "description": "C1 pin shown on the pinout diagram; the text available does not state its function."       },       {         "number": "3",         "name": "CSEL",         "type": "passive",-        "description": "Sensitivity adjustment pin that takes a CSEL capacitor of 0pF to 100pF."+        "description": "Sensitivity adjustment pin that takes a capacitor of 0pF to 100pF, where 0pF means no capacitor on CSEL."       },       {         "number": "4",         "name": "C2",         "type": "passive",-        "description": "C2 pin used with the sensitivity adjustment network; its detailed function text is not legible in the supplied datasheet text."+        "description": "C2 pin shown on the pinout diagram; the text available does not state its function."       },       {         "number": "5",         "name": "KEY",         "type": "input",-        "description": "Touch key sensing input pin of the XW01."+        "description": "Touch key sensing pin; the pin table text was not readable, so the function is inferred from the pin name."       },       {         "number": "6",         "name": "OUT",         "type": "output",-        "description": "Key output pin of the XW01, which reports the key state."+        "description": "Key output pin that reports the touch key state; the pin table text was not readable."       },       {         "number": "7",         "name": "NC",         "type": "unconnected",-        "description": "No-connect pin."+        "description": "No connection pin."       },       {         "number": "8",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin, with a 2.5V to 5.5V operating voltage range."+        "description": "Positive supply pin, with an operating voltage of 2.5V~5.5V."       }     ],     "provenance": {@@ -106,12 +106,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbering and names come from the page 2 package drawing (pin 1 at the top left by the dot, coun",+          "extractor flagged: Pin numbers and names come from the page 2 pinout diagram. The text of the pin description table on ; The datasheet text I have is only partly readable (Chinese text is missing). I could not confirm tha",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 8,-        "cost_usd": 0.1983,-        "at": "2026-11-12T04:55:51"+        "cost_usd": 0.2008,+        "at": "2026-11-12T06:02:02"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1d0c40fb1015a1967ef3da0b18c41152.pdf",@@ -140,12 +140,12 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          6.0,+          6,           4.9,           1.75         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",         "checked": "2026-11-12",@@ -159,14 +159,14 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          6.0,+          6,           4.9,           1.75         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "15b857a0f9a376865616001237245dd3da82f65532c5166503e3d44c7e32465a",+        "sha256": "8dce7a59bdd4e73b694bed4386655cd6a25049edc50fba6a948add926f624bf4",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -189,7 +189,7 @@         ]       },       "E": {-        "nom_mm": 6.0,+        "nom_mm": 6,         "range_mm": [           5.7,           6.3@@ -264,5 +264,8 @@     "xw01-sop8-hero.glb",     "xw01-sop8-hero.overlay.json",     "xw01-sop8-etched.glb"-  ]-}+  ],+  "description": "Sam&wing Touch Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "visibility": "private",+  "org": "adom"+}\ No newline at end of file
xw01-sop8-hero.overlay.json+261−256
@@ -1,260 +1,265 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "XW01-SOP8",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 6.9,-      "dash_mm": 0.1725,-      "gap_mm": 0.1035,-      "pad_stroke_mm": 0.0414-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "XW01-SOP8",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 6.9,+   "dash_mm": 0.1725,+   "gap_mm": 0.1035,+   "pad_stroke_mm": 0.0414   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.552,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -2.11,-      2.11-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -2.205,-      2.205-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "xw01-sop8-etched.glb",-    "glb_sha256": "a9da9abe30bab00645416e2300ae4559c85a682c8f07c7590af2d17cd5206910",-    "footprint": "xw01-sop8.kicad_mod",-    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",-    "pins": "page.json component.pins",-    "pins_sha256": "a223b5508a7fe3f2047ca361882d41a74f9087872586fb7a43527614dd510386"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "GND",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "C1",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "CSEL",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "C2",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "KEY",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "OUT",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "NC",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VDD",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.552,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -2.11,+   2.11+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -2.205,+   2.205   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "xw01-sop8-etched.glb",+  "glb_sha256": "a9da9abe30bab00645416e2300ae4559c85a682c8f07c7590af2d17cd5206910",+  "footprint": "xw01-sop8.kicad_mod",+  "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+  "pins": "page.json component.pins",+  "pins_sha256": "a223b5508a7fe3f2047ca361882d41a74f9087872586fb7a43527614dd510386"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "GND",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "C1",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "CSEL",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "C2",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "KEY",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "OUT",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "NC",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VDD",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file