main
Ray
Publish 0.1.0
d0b0d4c
XTR112UA
Texas Instruments · ADCs/DACs - Special Purpose · SOIC-14
XTR112UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IR1 | output | Precision current source 1 output, 250µA for the XTR112 (100µA for the XTR114), used to excite the RTD. |
| 2 | VIN- | power_in | Inverting input of the instrumentation amplifier; input voltage is referenced to the IO pin, 0V to V+, and the common-mode range is 1.25V to 3.5V with respect to IRET. |
| 3 | RG | passive | Gain-setting resistor connection; RG sets the span through IO = 4mA + VIN • (40/RG). |
| 4 | RG | passive | Second gain-setting resistor connection; RG sets the span through IO = 4mA + VIN • (40/RG). |
| 5 | NC | unconnected | No connection. |
| 6 | IRET | passive | Return path for all current from the current sources and VREG, so current in external circuitry is sensed and included in the output current without error. |
| 7 | IO | output | Current output pin of the 4-20mA loop; V+ is measured with respect to this pin. |
| 8 | E | input | Emitter connection to the external transistor Q1 that carries most of the 4-20mA loop current. |
| 9 | B | output | Base drive connection to the external transistor Q1 that carries most of the 4-20mA loop current. |
| 10 | V+ | power_in | Positive supply connection, operating range 7.5V to 36V (40V absolute maximum), referenced to the IO pin. |
| 11 | VREG | power_out | On-chip regulated voltage of about 5.1V that can source about 2.1mA (XTR112) or 2.4mA (XTR114) and sink about 1mA. |
| 12 | VLIN | input | Linearization input; RLIN1 (and RLIN2 for three-wire RTD) connects here for 2nd-order RTD correction, and it is left open if no linearization is wanted. |
| 13 | VIN+ | power_in | Non-inverting input of the instrumentation amplifier; input voltage is referenced to the IO pin, 0V to V+, and the common-mode range is 1.25V to 3.5V with respect to IRET. |
| 14 | IR2 | output | Precision current source 2 output, 250µA for the XTR112 (100µA for the XTR114), used to drive the zero-setting resistor RZ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Data Acquisition |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current, Specified Range | 4 | 20 | mA | 2 | |||
| Over-Scale Limit | 24 | 27 | 30 | mA | 2 | ||
| Under-Scale Limit: XTR112 | 0.9 | 1.3 | 1.7 | mA | IREG = 0 | 2 | |
| Initial Error (zero output) | -50 | 50 | µA | 2 | |||
| Zero Output vs Temperature | -0.9 | 0.9 | µA/°C | 2 | |||
| Zero Output vs Supply Voltage, V+ | 0.04 | 0.2 | µA/V | V+ = 7.5V to 36V | 2 | ||
| Span Initial Error | -0.4 | 0.4 | % | Full Scale (VIN) = 50mV | 2 | ||
| Span vs Temperature | -25 | 25 | ppm/°C | 2 | |||
| Span Nonlinearity | 0.003 | 0.01 | % | Full Scale (VIN) = 50mV | 2 | ||
| Input Offset Voltage | -250 | 250 | µV | VCM = 2V | 2 | ||
| Input Offset Voltage vs Temperature | -3 | 3 | µV/°C | 2 | |||
| Input Offset Voltage vs Supply Voltage, V+ | -3 | 3 | µV/V | V+ = 7.5V to 36V | 2 | ||
| Input Offset Voltage vs Common-Mode Voltage | -100 | 100 | µV/V | VCM = 1.25V to 3.5V | 2 | ||
| Common-Mode Input Range | 1.25 | 3.5 | V | 2 | |||
| Input Bias Current | 5 | 50 | nA | 2 | |||
| Input Offset Current | -10 | 10 | nA | 2 | |||
| Current Source Accuracy (XTR112 250µA) | -0.4 | 0.4 | % | 2 | |||
| Current Source vs Temperature | -75 | 75 | ppm/°C | 2 | |||
| Current Source vs Power Supply, V+ | -25 | 25 | ppm/V | V+ = 7.5V to 36V | 2 | ||
| Current Source Matching | -0.2 | 0.2 | % | 2 | |||
| Current Source Matching vs Temperature | -30 | 30 | ppm/°C | 2 | |||
| Current Source Matching vs Power Supply, V+ | 1 | 10 | ppm/V | V+ = 7.5V to 36V | 2 | ||
| Output Current (VREG): XTR112 | -1 | 2.1 | mA | 2 | |||
| VREG Accuracy | -0.1 | 0.1 | V | 2 | |||
| RLIN (internal) Accuracy | -1 | 1 | % | 2 | |||
| RLIN (internal) vs Temperature | -100 | 100 | ppm/°C | 2 | |||
| Operating Voltage Range | 7.5 | 36 | V | 2 | |||
| Specification Temperature Range, TMIN to TMAX | -40 | 85 | °C | 2 | |||
| Operating/Storage Range | -55 | 125 | °C | 2 | |||
| Power Supply, V+ (absolute maximum) | 40 | V | referenced to IO pin | 3 | |||
| Input Voltage, VIN, VIN (absolute maximum) | 0 | V | referenced to IO pin; maximum printed as V+ | 3 | |||
| Storage Temperature Range | -55 | 125 | °C | 3 | |||
| Lead Temperature | 300 | °C | soldering, 10s | 3 | |||
| Junction Temperature | 165 | °C | 3 | ||||
| Zero Output Current | 4 | mA | VIN = 0V, RG = ∞ | 2 | |||
| Thermal Resistance, θJA (SO-14 surface mount) | θJA | 100 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
XTR112UA - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
xtr112ua-etched.step/xtr112ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xtr112ua.step/xtr112ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
0bcda0064c42437c, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XTR112UA
**Texas Instruments** · ADCs/DACs - Special Purpose · SOIC-14
XTR112UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IR1 | output | Precision current source 1 output, 250µA for the XTR112 (100µA for the XTR114), used to excite the RTD. |
| 2 | VIN- | power_in | Inverting input of the instrumentation amplifier; input voltage is referenced to the IO pin, 0V to V+, and the common-mode range is 1.25V to 3.5V with respect to IRET. |
| 3 | RG | passive | Gain-setting resistor connection; RG sets the span through IO = 4mA + VIN • (40/RG). |
| 4 | RG | passive | Second gain-setting resistor connection; RG sets the span through IO = 4mA + VIN • (40/RG). |
| 5 | NC | unconnected | No connection. |
| 6 | IRET | passive | Return path for all current from the current sources and VREG, so current in external circuitry is sensed and included in the output current without error. |
| 7 | IO | output | Current output pin of the 4-20mA loop; V+ is measured with respect to this pin. |
| 8 | E | input | Emitter connection to the external transistor Q1 that carries most of the 4-20mA loop current. |
| 9 | B | output | Base drive connection to the external transistor Q1 that carries most of the 4-20mA loop current. |
| 10 | V+ | power_in | Positive supply connection, operating range 7.5V to 36V (40V absolute maximum), referenced to the IO pin. |
| 11 | VREG | power_out | On-chip regulated voltage of about 5.1V that can source about 2.1mA (XTR112) or 2.4mA (XTR114) and sink about 1mA. |
| 12 | VLIN | input | Linearization input; RLIN1 (and RLIN2 for three-wire RTD) connects here for 2nd-order RTD correction, and it is left open if no linearization is wanted. |
| 13 | VIN+ | power_in | Non-inverting input of the instrumentation amplifier; input voltage is referenced to the IO pin, 0V to V+, and the common-mode range is 1.25V to 3.5V with respect to IRET. |
| 14 | IR2 | output | Precision current source 2 output, 250µA for the XTR112 (100µA for the XTR114), used to drive the zero-setting resistor RZ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Data Acquisition |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current, Specified Range | | 4 | | 20 | mA | | 2 |
| Over-Scale Limit | | 24 | 27 | 30 | mA | | 2 |
| Under-Scale Limit: XTR112 | | 0.9 | 1.3 | 1.7 | mA | IREG = 0 | 2 |
| Initial Error (zero output) | | -50 | | 50 | µA | | 2 |
| Zero Output vs Temperature | | -0.9 | | 0.9 | µA/°C | | 2 |
| Zero Output vs Supply Voltage, V+ | | | 0.04 | 0.2 | µA/V | V+ = 7.5V to 36V | 2 |
| Span Initial Error | | -0.4 | | 0.4 | % | Full Scale (VIN) = 50mV | 2 |
| Span vs Temperature | | -25 | | 25 | ppm/°C | | 2 |
| Span Nonlinearity | | | 0.003 | 0.01 | % | Full Scale (VIN) = 50mV | 2 |
| Input Offset Voltage | | -250 | | 250 | µV | VCM = 2V | 2 |
| Input Offset Voltage vs Temperature | | -3 | | 3 | µV/°C | | 2 |
| Input Offset Voltage vs Supply Voltage, V+ | | -3 | | 3 | µV/V | V+ = 7.5V to 36V | 2 |
| Input Offset Voltage vs Common-Mode Voltage | | -100 | | 100 | µV/V | VCM = 1.25V to 3.5V | 2 |
| Common-Mode Input Range | | 1.25 | | 3.5 | V | | 2 |
| Input Bias Current | | | 5 | 50 | nA | | 2 |
| Input Offset Current | | -10 | | 10 | nA | | 2 |
| Current Source Accuracy (XTR112 250µA) | | -0.4 | | 0.4 | % | | 2 |
| Current Source vs Temperature | | -75 | | 75 | ppm/°C | | 2 |
| Current Source vs Power Supply, V+ | | -25 | | 25 | ppm/V | V+ = 7.5V to 36V | 2 |
| Current Source Matching | | -0.2 | | 0.2 | % | | 2 |
| Current Source Matching vs Temperature | | -30 | | 30 | ppm/°C | | 2 |
| Current Source Matching vs Power Supply, V+ | | | 1 | 10 | ppm/V | V+ = 7.5V to 36V | 2 |
| Output Current (VREG): XTR112 | | -1 | | 2.1 | mA | | 2 |
| VREG Accuracy | | -0.1 | | 0.1 | V | | 2 |
| RLIN (internal) Accuracy | | -1 | | 1 | % | | 2 |
| RLIN (internal) vs Temperature | | -100 | | 100 | ppm/°C | | 2 |
| Operating Voltage Range | | 7.5 | | 36 | V | | 2 |
| Specification Temperature Range, TMIN to TMAX | | -40 | | 85 | °C | | 2 |
| Operating/Storage Range | | -55 | | 125 | °C | | 2 |
| Power Supply, V+ (absolute maximum) | | | | 40 | V | referenced to IO pin | 3 |
| Input Voltage, VIN, VIN (absolute maximum) | | 0 | | | V | referenced to IO pin; maximum printed as V+ | 3 |
| Storage Temperature Range | | -55 | | 125 | °C | | 3 |
| Lead Temperature | | | | 300 | °C | soldering, 10s | 3 |
| Junction Temperature | | | | 165 | °C | | 3 |
| Zero Output Current | | | 4 | | mA | VIN = 0V, RG = ∞ | 2 |
| Thermal Resistance, θJA (SO-14 surface mount) | θJA | | 100 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `XTR112UA`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `xtr112ua-etched.step` / `xtr112ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xtr112ua.step` / `xtr112ua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/xtr112.pdf) (19 pp, sha256 `0bcda0064c42437c`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xtr112ua-datasheet.pdf)