main
Ray Publish 0.1.0 229efc5

XT30PW-M30.G.Y

Polarity is the + / - moulded on the housing; the maker's datasheet does not say which contact it marks. Check the part before wiring.

AMASS · Plug · -

XT30PW-M30.G.Y from AMASS, in a -. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive XT30 male (plug) contact 1, 1.9 mm PCB hole; numbering follows KiCad Connector_AMASS:AMASS_XT30PW-M. Which contact the housing marks + or - is Unknown: Amass prints no contact identity.
2 2 passive XT30 male (plug) contact 2, 1.9 mm PCB hole; numbering follows KiCad Connector_AMASS:AMASS_XT30PW-M. Which contact the housing marks + or - is Unknown: Amass prints no contact identity.

Key specifications

Parameter Value
Manufacturer AMASS
Package -
Category Industrial Control Electrical
Pins 2

CAD (KiCad official)

  • Symbol: XT30PW-M30.G.Y
  • Footprint: Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal
  • 3D model: -, generated on the KiCad land (body 13.3 x 9 mm, terminals on the pads, 5.0 mm tall, given). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xt30pw-m30-g-y-etched.step / xt30pw-m30-g-y-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xt30pw-m30-g-y.step / xt30pw-m30-g-y.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AMASS datasheet (3 pp, sha256 db3ebbe3384b13e0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0). Land: Amass prints the hole diagram (datasheet p.3: 2x 1.00 mounting holes 11.00 apart, 2x 1.90 contact holes 5.00 apart, rows 10.00 apart) and no contact numbers; KiCad's AMASS_XT30PW-M places the same holes. Two land readings agreed with it hole for hole and differed only in which contact is 1..

Datasheet PDF