component
XS3A1T5157GMX
Public Made by Adomby adom
Nexperia Analog Switches, Multiplexers, XSON-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XS3A1T5157GMX
Nexperia · Analog Switches, Multiplexers · XSON-6(1x1.5)
XS3A1T5157GMX from Nexperia, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Digital select input with Schmitt-trigger action, rated 0 V to 4.3 V; LOW selects Y1 and HIGH selects Y2 onto Z. |
| 2 | VCC | power_in | Supply voltage, recommended range 1.4 V to 4.3 V; absolute maximum rating is -0.5 V to +4.6 V. |
| 3 | Z | passive | Common input or output of the switch; signals up to VCC are transmitted between Z and Y1 or Y2. |
| 4 | Y1 | passive | Independent input or output, connected to Z when S is LOW; switch voltage must stay within 0 V to VCC. |
| 5 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 6 | Y2 | passive | Independent input or output, connected to Z when S is HIGH; switch voltage must stay within 0 V to VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | XSON-6(1x1.5) |
| Category | Interface |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | 4.6 | V | 4 | ||
| Input voltage, select input S (absolute maximum) | VI | -0.5 | 4.6 | V | select input S | 4 | |
| Switch voltage (absolute maximum) | VSW | -0.5 | V | max printed as VCC + 0.5 V; may not exceed 4.6 V | 4 | ||
| Input clamping current (absolute maximum) | IIK | -50 | mA | VI < -0.5 V | 4 | ||
| Switch clamping current (absolute maximum) | ISK | -50 | 50 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 | |
| Switch current, continuous (absolute maximum) | ISW | -350 | 350 | mA | VSW > -0.5 V or VSW < VCC + 0.5 V; source or sink current | 4 | |
| Switch current, pulsed peak (absolute maximum) | ISW | -500 | 500 | mA | VSW > -0.5 V or VSW < VCC + 0.5 V; pulsed at 1 ms duration, < 10 % duty cycle; peak current | 4 | |
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation (absolute maximum) | Ptot | 250 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| Supply voltage (recommended operating) | VCC | 1.4 | 4.3 | V | 4 | ||
| Input voltage, select input S (recommended operating) | VI | 0 | 4.3 | V | select input S | 4 | |
| Ambient temperature (recommended operating) | Tamb | -40 | 125 | °C | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 200 | ns/V | VCC = 1.4 V to 4.3 V; applies to control signal levels | 4 | ||
| HIGH-level input voltage | VIH | 0.9 | V | VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 1.1 | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 1.3 | V | VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 1.4 | V | VCC = 3.6 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.3 | V | VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.4 | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.5 | V | VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.6 | V | VCC = 3.6 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 | ||
| Input leakage current | II | -1 | 1 | μA | select input S; VI = GND to 4.3 V; VCC = 1.4 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 | |
| OFF-state leakage current, Y1/Y2 port | IS(OFF) | -500 | 500 | nA | Y1 and Y2 port; see Fig. 4; VCC = 1.4 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | |
| ON-state leakage current, Z port | IS(ON) | -500 | 500 | nA | Z port; see Fig. 5; VCC = 1.4 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | |
| Supply current | ICC | 6000 | nA | VI = VCC or GND; VSW = GND or VCC; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| Supply current | ICC | 7000 | nA | VI = VCC or GND; VSW = GND or VCC; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 | ||
| Additional supply current | ΔICC | 7 | μA | VI = 2.6 V; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 | ||
| Additional supply current | ΔICC | 1 | μA | VI = 2.6 V; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| Additional supply current | ΔICC | 15 | μA | VI = 1.8 V; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 | ||
| Additional supply current | ΔICC | 5 | μA | VI = 1.8 V; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| Additional supply current | ΔICC | 500 | nA | VI = 1.8 V; VCC = 2.5 V; Tamb = -40 °C to +125 °C | 5 | ||
| ON resistance (peak) | RON(peak) | 4.1 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (peak) | RON(peak) | 1.7 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 1.65 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (peak) | RON(peak) | 0.9 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance mismatch between channels | ΔRON | 0.3 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance mismatch between channels | ΔRON | 0.1 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (flatness) | RON(flat) | 3.6 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (flatness) | RON(flat) | 1.3 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.65 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (flatness) | RON(flat) | 0.35 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance (flatness) | RON(flat) | 0.45 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 6 | ||
| Enable time | ten | 120 | ns | S to Z or Yn; see Fig. 14; VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 9 | ||
| Enable time | ten | 90 | ns | S to Z or Yn; see Fig. 14; VCC = 1.65 V to 1.95 V; Tamb = -40 °C to +125 °C | 9 | ||
| Enable time | ten | 55 | ns | S to Z or Yn; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 | ||
| Enable time | ten | 50 | ns | S to Z or Yn; see Fig. 14; VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 9 | ||
| Disable time | tdis | 90 | ns | S to Z or Yn; see Fig. 14; VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 9 | ||
| Disable time | tdis | 65 | ns | S to Z or Yn; see Fig. 14; VCC = 1.65 V to 1.95 V; Tamb = -40 °C to +125 °C | 9 | ||
| Disable time | tdis | 35 | ns | S to Z or Yn; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 | ||
| Disable time | tdis | 30 | ns | S to Z or Yn; see Fig. 14; VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 9 |
CAD (KiCad official)
- Symbol:
XS3A1T5157GMX - Footprint:
Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD - 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files:
xs3a1t5157gmx-etched.step/xs3a1t5157gmx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xs3a1t5157gmx.step/xs3a1t5157gmx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (19 pp, sha256
e079caf3fd12f76e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XS3A1T5157GMX
**Nexperia** · Analog Switches, Multiplexers · XSON-6(1x1.5)
XS3A1T5157GMX from Nexperia, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Digital select input with Schmitt-trigger action, rated 0 V to 4.3 V; LOW selects Y1 and HIGH selects Y2 onto Z. |
| 2 | VCC | power_in | Supply voltage, recommended range 1.4 V to 4.3 V; absolute maximum rating is -0.5 V to +4.6 V. |
| 3 | Z | passive | Common input or output of the switch; signals up to VCC are transmitted between Z and Y1 or Y2. |
| 4 | Y1 | passive | Independent input or output, connected to Z when S is LOW; switch voltage must stay within 0 V to VCC. |
| 5 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 6 | Y2 | passive | Independent input or output, connected to Z when S is HIGH; switch voltage must stay within 0 V to VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | XSON-6(1x1.5) |
| Category | Interface |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | | 4.6 | V | | 4 |
| Input voltage, select input S (absolute maximum) | VI | -0.5 | | 4.6 | V | select input S | 4 |
| Switch voltage (absolute maximum) | VSW | -0.5 | | | V | max printed as VCC + 0.5 V; may not exceed 4.6 V | 4 |
| Input clamping current (absolute maximum) | IIK | -50 | | | mA | VI < -0.5 V | 4 |
| Switch clamping current (absolute maximum) | ISK | -50 | | 50 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 |
| Switch current, continuous (absolute maximum) | ISW | -350 | | 350 | mA | VSW > -0.5 V or VSW < VCC + 0.5 V; source or sink current | 4 |
| Switch current, pulsed peak (absolute maximum) | ISW | -500 | | 500 | mA | VSW > -0.5 V or VSW < VCC + 0.5 V; pulsed at 1 ms duration, < 10 % duty cycle; peak current | 4 |
| Storage temperature (absolute maximum) | Tstg | -65 | | 150 | °C | | 4 |
| Total power dissipation (absolute maximum) | Ptot | | | 250 | mW | Tamb = -40 °C to +125 °C | 4 |
| Supply voltage (recommended operating) | VCC | 1.4 | | 4.3 | V | | 4 |
| Input voltage, select input S (recommended operating) | VI | 0 | | 4.3 | V | select input S | 4 |
| Ambient temperature (recommended operating) | Tamb | -40 | | 125 | °C | | 4 |
| Input transition rise and fall rate | Δt/ΔV | | | 200 | ns/V | VCC = 1.4 V to 4.3 V; applies to control signal levels | 4 |
| HIGH-level input voltage | VIH | 0.9 | | | V | VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 1.1 | | | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 1.3 | | | V | VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 1.4 | | | V | VCC = 3.6 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.3 | V | VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.4 | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.5 | V | VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.6 | V | VCC = 3.6 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| Input leakage current | II | -1 | | 1 | μA | select input S; VI = GND to 4.3 V; VCC = 1.4 V to 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| OFF-state leakage current, Y1/Y2 port | IS(OFF) | -500 | | 500 | nA | Y1 and Y2 port; see Fig. 4; VCC = 1.4 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| ON-state leakage current, Z port | IS(ON) | -500 | | 500 | nA | Z port; see Fig. 5; VCC = 1.4 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| Supply current | ICC | | | 6000 | nA | VI = VCC or GND; VSW = GND or VCC; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| Supply current | ICC | | | 7000 | nA | VI = VCC or GND; VSW = GND or VCC; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| Additional supply current | ΔICC | | | 7 | μA | VI = 2.6 V; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| Additional supply current | ΔICC | | | 1 | μA | VI = 2.6 V; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| Additional supply current | ΔICC | | | 15 | μA | VI = 1.8 V; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 5 |
| Additional supply current | ΔICC | | | 5 | μA | VI = 1.8 V; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 |
| Additional supply current | ΔICC | | | 500 | nA | VI = 1.8 V; VCC = 2.5 V; Tamb = -40 °C to +125 °C | 5 |
| ON resistance (peak) | RON(peak) | | | 4.1 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (peak) | RON(peak) | | | 1.7 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 1.65 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (peak) | RON(peak) | | | 0.9 | Ω | VI = GND to VCC; ISW = 100 mA; see Fig. 6; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance mismatch between channels | ΔRON | | | 0.3 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance mismatch between channels | ΔRON | | | 0.1 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (flatness) | RON(flat) | | | 3.6 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.4 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (flatness) | RON(flat) | | | 1.3 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 1.65 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (flatness) | RON(flat) | | | 0.35 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 2.3 V; Tamb = -40 °C to +125 °C | 6 |
| ON resistance (flatness) | RON(flat) | | | 0.45 | Ω | VI = GND to VCC; ISW = 100 mA; VCC = 4.3 V; Tamb = -40 °C to +125 °C | 6 |
| Enable time | ten | | | 120 | ns | S to Z or Yn; see Fig. 14; VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 9 |
| Enable time | ten | | | 90 | ns | S to Z or Yn; see Fig. 14; VCC = 1.65 V to 1.95 V; Tamb = -40 °C to +125 °C | 9 |
| Enable time | ten | | | 55 | ns | S to Z or Yn; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 |
| Enable time | ten | | | 50 | ns | S to Z or Yn; see Fig. 14; VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 9 |
| Disable time | tdis | | | 90 | ns | S to Z or Yn; see Fig. 14; VCC = 1.4 V to 1.6 V; Tamb = -40 °C to +125 °C | 9 |
| Disable time | tdis | | | 65 | ns | S to Z or Yn; see Fig. 14; VCC = 1.65 V to 1.95 V; Tamb = -40 °C to +125 °C | 9 |
| Disable time | tdis | | | 35 | ns | S to Z or Yn; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 |
| Disable time | tdis | | | 30 | ns | S to Z or Yn; see Fig. 14; VCC = 2.7 V to 3.6 V; Tamb = -40 °C to +125 °C | 9 |
## CAD (KiCad official)
- Symbol: `XS3A1T5157GMX`
- Footprint: `Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD`
- 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files: `xs3a1t5157gmx-etched.step` / `xs3a1t5157gmx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xs3a1t5157gmx.step` / `xs3a1t5157gmx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600520778068733952) (19 pp, sha256 `e079caf3fd12f76e`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xs3a1t5157gmx-datasheet.pdf)